[Full-Version] 2023 New 156-835 Actual Exam Dumps, CheckPoint Practice Test [Q13-Q37]

ExamBoosts November 14, 2023 156-835 > CheckPoint 0

Rate this post

[Full-Version] 2023 New 156-835 Actual Exam Dumps, CheckPoint Practice Test

Study HIGH Quality 156-835 Free Study Guides and Exams Tutorials

The 156-835 exam consists of 90 multiple-choice and scenario-based questions that assess a candidate’s knowledge and skills in deploying, configuring, and troubleshooting Check Point Maestro. 156-835 exam covers a wide range of topics, including the architecture of Check Point Maestro, the deployment of gateways and clusters, network segmentation, and the use of advanced features such as load balancing and high availability.

Q13. What is the Sync network on Appliances used for?

May be used for any purpose, but synchronization always have priority

To synchronize configurations and connections in between connection tables of different Appliances

To transfer configuration files from Orchestrators to Appliances

To transfer data in case of full utilization of the downlink interfaces

Q14. In case of VSX: What is the right command to see overall performance details of all Appliances within the Security Group and all Virtual Systems?

asg pert -v -p

asg pert -vs all -v -vv

asg pert -v

asg pert -vs enabled -p

Q15. When running asg perf -v in a Dual-Site environment, we can see only Appliances from one of the sites. That means we’re working in:

VSLS mode

Active /Active

Active / Standby HA mode

This is not Dual-Site, in Dual-Site we always see Appliances from both sites

Q16. What cannot be learned from the output of asg perf -v -p command?

Average CPU usage on Appliances

Real-time throughput

Average CPU usage on Orchestrators

Per-path distribution

Q17. What is the default range of physical ports for downlinks on Orchestrator MHO-140?

25 – 47

27 – 47

1 – 48

1 – 25

Q18. For a VSX configuration – Which statement is wrong?

All Virtual Systems exist on the SMO

All Virtual Systems exist on all Appliances

VSX configuration is the same on all Appliances within the same Security Group

Each Appliance owns different Virtual Systems

Q19. What kind of cluster Dual-Site can be compared to?

Active-Standby or VSLS

VSLS only

Active-Active

Active-Standby only

Q20. What is the default Distribution mode?

User

Auto-topology

Manual-General

Network

In Check Point firewall, the default Distribution mode is Auto-topology. Auto-topology uses the built-in algorithm to automatically determine the best way to distribute the traffic across the firewall cluster, based on the topology of the network and the current load on the cluster members.
Auto-topology takes into account the available bandwidth and the CPU utilization of each cluster member, and then makes decisions on how to distribute the traffic across the cluster in real-time. It is a dynamic and adaptive mode that ensures the best use of the available resources and the highest level of performance.

Q21. What command will be used for updating fwkern.conf file on all Appliances within Security Group?

g_update_conf_file

g_update_kernel

g_all update_conf_file

Q22. How many power supplies are presented on MHO-140?

1 with option for 2

Q23. What cannot be a reason for “Failed to get remote orchestrator interfaces” error message, when clicking on “Orchestrator” in WebUI?

Remote orchestrator has no empty interfaces

One orchestrator only, but Orchestrator amount is 2 or no Sync in between orchestrators

No Sync between orchestrators

Single orchestrator environment, but configured Orchestrator amount is 2

Q24. What is the maximum amount of Appliances within Security group in Dual-Site configuration?

Q25. What is an uplink interface used for?

To connect in between Orchestrators

To connect appliances to customer’s infrastructure

To connect Orchestrators to customer’s infrastructure

To connect in between appliances

Q26. What cannot be learned from the output of lldpctl?

Distribution mode

Orchestrator’s IP

Serial number of Appliance

Appliance model

Q27. What is the default IP range of Sync network (with no increment)?

The same as Management network

198.51.100.0

192.0.2.0

192.168.1.0

Q28. What kind of cluster Dual-Site can be compared to?

Active-Standby or VSLS

VSLS only

Active-Active

Active-Standby only

A Dual-Site cluster is a type of cluster that combines the features of both Active-Standby and VSLS (Virtual Systems Load Sharing) clusters. Dual-Site clusters allow you to have two active clusters, one at each site, and the traffic is distributed between the two sites based on predefined rules and priorities.
A Dual-Site cluster can be compared to an Active-Standby cluster because one of the clusters is running in a passive mode and is only activated in case of a failure or a planned maintenance of the active cluster. And also can be compared to a VSLS cluster because both clusters are active and share the traffic load.
It’s a type of High Availability solution that provides redundancy and failover capabilities across two geographically separated sites. In case of a failure or a outage on one site, the traffic is automatically redirected to the other site, ensuring that the service is not interrupted.

Q29. What is the throughput penalty of Security Group?

5% per member

Depends on the type of Appliance

10% per Security Group with no relation to amount of members

1% per member

Q30. What type of cluster can a Security Group can be compared to?

VSLS

Load Sharing Active /Active

Active / Backup

Active / Standby

Q31. What is the purpose of RJ-45 connectors located at the front panel of the Orchestrator MHO-170?

Two Out-of-band interfaces for access to Orchestrator itself

Out-of-band interface for access to Orchestrator itself and Serial Console connector

1Gbps connectivity for Security Groups

Reserved for internal purposes. Not in use

Q32. What does the command’g_all’ do?

It’s followed by other command and execute it on all active Appliances within Security Group

It’s followed by other command and execute it on all Appliances connected to Orchestrator

Switches all Appliances to Global mode

Bring up all Appliances

Q33. Where should sx_api_ports_dump,py command be ran?

Orchestrator

SMO Appliance

Management server

Security Group

Q34. What kinds of transceivers are supported on Orchestrator MHO-170?

QSFP. QSFP28

SFP. SFP+. SFP28

SFP+, SFP28. QSFP

SFP. QSFP, QSFP28

Q35. What is a Security Group?

Logical group of computer and network resources

Group of security administrators

Group of security gateways

Group of appliances with enabled NGTX software blades

Q36. Complete the sentence: When using a Break-out cable…

All tails of the break-out cable must represent the same type of ports

All tails of the break-out cable must represent uplinks

Each tail of the break-out cable represent an independent port

All tails of the break-out cable must represent downlinks

Q37. How many orchestrators may Dual-Site include”

2 or 4

Only 4

Loading …

CheckPoint 156-835 certification exam is an excellent opportunity for IT professionals to showcase their expertise in Check Point security products. Check Point Certified Maestro Expert certification exam is designed to test the candidate’s knowledge and skills in Check Point’s security solutions, and it is recognized globally. IT professionals who pass the exam will be recognized as Check Point Certified Maestro Experts, which will help advance their careers in the field of cybersecurity.

Get 100% Real Free CCME 156-835 Sample Questions: https://www.examboosts.com/CheckPoint/156-835-practice-exam-dumps.html