Online Questions – Valid Practice To your D-UN-DY-23 Exam (Updated 38 Questions) [Q22-Q39]

ExamBoosts March 16, 2024 D-UN-DY-23 > EMC 0

Rate this post

Online Questions – Valid Practice To your D-UN-DY-23 Exam (Updated 38 Questions)

Practice To D-UN-DY-23 – Remarkable Practice On your Dell Unity Deploy 2023 Exam Exam

NO.22 Which feature can be configured for a Dell Unity XT file system NFS share?

Access-Based Enumeration

Protocol Encryption

Host Access Level

Distributed File System

Explanation
A feature that can be configured for a Dell Unity XT file system NFS share is the Host Access Level. This feature allows the user to specify the access permissions for each host or host group that is allowed to access the NFS share. The access permissions can be set to Read/Write, Read Only, or No Access. The Host Access Level feature can be used to control the security and performance of the NFS share. Access-Based Enumeration, Protocol Encryption, and Distributed File System are features that can be configured for a Dell Unity XT file system SMB share, not NFS share.
References: [Dell EMC Unity: File System Configuration], [Dell EMC Unity: SMB Share Configuration]

NO.23 A deployment engineer has changed theSchedule Time Zoneunder the Settings menu. However, existing snapshots schedules continue to run at the previously configured time.
Why is this occurring?

Existing snapshot schedules cannot be updated to the same absolute time.

The Unity system time is not set correctly and must be updated under system settings.

Existing snapshot schedules are not updated to the same absolute time when the time zone is changed.

The Unity management server was not restarted before time zone changes took effect.

Explanation
When the Schedule Time Zone is changed under the Settings menu, it only affects the display of the time zone and the creation of new snapshot schedules. Existing snapshot schedules are not automatically adjusted to the new time zone, and will continue to run at the same absolute time as before. For example, if a snapshot schedule was created to run every day at 10:00 AM inGMT+1, and the Schedule Time Zone was changed to GMT+2, the snapshot schedule will still run at 10:00 AM in GMT+1, which is 11:00 AM in GMT+2. To update the existing snapshot schedules to the new time zone, the administrator must edit each schedule manually and change the start time accordingly. References: Dell EMC Unity: Snapshots and Thin Clones1, page 16.

NO.24 An administrator has configured a Host Group to have access to a storage object.
What are two benefits of this configuration? (Choose two.)

Ensures that snapshots are applied to all LUNs in the group

Provides multiple hosts the same access to NFS Filesvstems

Provides multiple hosts access to the same VMFS Datastores

Ensures that block storage is replicated to the same hosts

Provides multiple hosts access to the same LUNs

Explanation
A Host Group is a logical grouping of hosts that share the same access permissions to storage objects, such as LUNs, VMFS Datastores, or NFS Filesystems. By configuring a Host Group, an administrator can simplify the management of multiple hosts and ensure consistent access to the storage resources. Some of the benefits of using a Host Group are:
Provides multiple hosts access to the same VMFS Datastores: A VMFS Datastore is a block-based storage object that is formatted with the VMware File System (VMFS) and used to store virtual machine files. A VMFS Datastore can be shared by multiple hosts that are part of a VMware cluster. By adding these hosts to a Host Group and assigning the VMFS Datastore to the Host Group, the administrator can ensure that all the hosts have the same access permissions and can access the virtual machines on the Datastore.
Provides multiple hosts access to the same LUNs: A LUN is a block-based storage object that is presented to a host as a SCSI device. A LUN can be shared by multiple hosts that have the same operating system and use a cluster-aware file system. By adding these hosts to a Host Group and assigning the LUN to the Host Group, the administrator can ensure that all the hosts have the same access permissions and can access the data on the LUN.
References:
Dell EMC Unity: Host Configuration
Dell EMC Unity: VMware ESXi Hosts and Clusters

NO.25 What is the purpose of a Proxy NAS server?

Access snapshot replicas on the destination side of a replicated file resource.

Increase performance for shared network connections that access NAS servers.

Increase security of production NAS servers.

Access snapshots for testing production NAS servers.

Explanation
The purpose of a Proxy NAS server is to access snapshot replicas on the destination side of a replicated file resource. A Proxy NAS server is a temporary NAS server that is created on the destination system to mount a snapshot replica of a replicated file system. This allows the user to access the data on the snapshot replica for testing, recovery, or other purposes. A Proxy NAS server does not increase performance or security of production NAS servers, nor does it access snapshots for testing production NAS servers.
References: [Dell EMC Unity: Replication Technologies], [Dell EMC Unity: File System Configuration]

NO.26 What is the maximum size of a drive partnership group when expanding a Dynamic Pool?

64 drives

84 drives

96 drives

32 drives

Explanation
A drive partnership group is a collection of drives of the same drive type that have been combined into a hidden dynamic pool object. Each drive within a dynamic pool can only be part of a single drive partnership group, and a drive will never change the drive partnership group. The maximum size of a drive partnership group is 32 drives, regardless of the drive type or size. When expanding a dynamic pool, the system will automatically create new drive partnership groups as needed, and distribute the drives evenly across the groups. The number of drive partnership groups in a dynamic pool is equal to the number of drives divided by
32, rounded up to the nearest integer. References: Dell Unity: Dynamic Pools2, page 5.

NO.27 A company has an ESXi host installed with FC HBAs that is connected to a Dell Unity XT storage array. A
500 GB LUN is provisioned to this host from the Unity array and is in production. The VMware administrator has configured a new vSwitch with the NICs on the server intended for iSCSI traffic. The storage administrator is asked to configure software iSCSI and provision a new 1 TB LUN from the storage array using iSCSI.
What is a consideration when satisfying this request?

Two iSCSI target interfaces must be configured with IP addresses from separate subnets.

Any single host should connect to any single array using one protocol only.

A connection must be established between the host iSCSI initiators and Unity iSCSI targets before provisioning the new LUN.

Explanation
Mixing FC and iSCSI protocols for the same host and array is not supported by Dell EMC Unity. This can cause issues with multipathing, failover, and performance. The best practice is to use one protocol per host and array pair. If the host needs to access both FC and iSCSI LUNs from different arrays, then separate vSwitches and port groups should be used for each protocol. References: Dell EMC Unity: Best Practices Guide1, page
19.

NO.28 What is a characteristic of FAST VP?

Fast VP data relocation runs in the background at all times once it is enabled.

Fast VP optimizes data replacement by moving 1 GB slices between disk tiers.

Users can set the Fast VP data relocation rate.

Users can enable or disable FAST VP at the LUN level.

Explanation
FAST VP (Fully Automated Storage Tiering for Virtual Pools) is a feature that automatically moves data within a storage pool based on the performance requirements and access patterns of the data. FAST VP data relocation runs in the background according to a user-defined schedule and rate. The schedule determines when the data relocation starts and ends, and the rate determines how much system resources are used for the data relocation. Users can set the Fast VP data relocation rate to High, Medium, Low, or None. High means that the data relocation has the highest priority and uses the most system resources, while None means that the data relocation is disabled. Fast VP data relocation does not run at all times, but only during the scheduled window. Fast VP optimizes data placement by moving 256 MB slices between disk tiers, not 1 GB slices.
Users cannot enable or disable FAST VP at the LUN level, but only at the storage pool level.
References: [Dell EMC Unity: FAST Technology Overview], [Dell EMC Unity: Storage Pools and RAID Groups]

NO.29 A storage administrator recently disabled the Advanced Deduplication on a LUN.
Which Dell Unity XT action can be used to remove the Advanced Deduplication savings from LUN?

Unmask the LUNfrom host.

Perform Local LUN Move.

Chanqe Tierinq Policy to Auto-Tier.

Disable the Data Reduction.

Explanation
When Advanced Deduplication is disabled on a LUN, the existing data that was deduplicated remains in its reduced state, and only new data written to the LUN is not deduplicated. To remove the Advanced Deduplication savings from the LUN, the administrator must perform a Local LUN Move operation, which copies the data from the source LUN to a destination LUN without deduplication. The destination LUN must have Advanced Deduplication disabled, and must be in the same storage pool as the source LUN. After the Local LUN Move is completed, the source LUN can be deleted and the destination LUN can be renamed as the original LUN. References: Dell Unity: Data Reduction2, page 9.

NO.30 What is the result of enabling Data Reduction on a LUN in a consistency group containing three LUNs?

Any writes to the LUN will go through the Data Reduction logic.

Data Reduction and Advanced Deduplication will be enabled on all LUNs.

Data Reduction will be enabled on all LUNs is the consistency group.

All writes to all consistency group LUNs will go through the Data Reduction logic.

Explanation
Data Reduction is a feature that reduces the amount of physical storage space required to store user data on a LUN. Data Reduction is enabled at the LUN level and applies to all the data in the LUN, including snapshots and thin clones. Data Reduction consists of two components: compression and deduplication. Compression reduces the size of data blocks by removing redundant information, while deduplication eliminates duplicate blocks across the LUN. When Data Reduction is enabled on a LUN, all writes to the LUN will go through the Data Reduction logic before being written to the storage pool. If the LUN is part of a consistency group, Data Reduction will be enabled on all the LUNs in the consistency group, and all writes to any LUN in the group will go through the Data Reduction logic. This ensures that the data in the consistency group is consistent and protected by the same Data Reduction settings. References:
Dell EMC Unity: Data Reduction Overview
Dell EMC Unity: Data Reduction Configuration and Best Practices

NO.31 Into what size slices is the LUN partitioned for RAID extents?

256 MB

128 MB

64 MB

512MB

Explanation
A LUN is a logical unit of storage that is presented to a host as a SCSI device. A LUN is composed of one or more RAID extents, which are the smallest units of storage that can be allocated to a LUN. A RAID extent is a slice of a RAID group that is used to store user data and parity information. The size of a RAID extent depends on the RAID type and the drive type of the RAID group. For example, a RAID 5 extent on a SAS drive is 128 MB, while a RAID 6 extent on a NL-SAS drive is 256 MB. The LUN is partitioned into slices that match the size of the RAID extents, and each slice is mapped to a RAID extent from a RAID group in the storage pool. The LUN slices are distributed across multiple RAID groups to improve performance and availability. References:
Dell EMC Unity: Storage Pools and RAID Groups
Dell EMC Unity: LUN Management

NO.32 Which snapshot option is set automatically when a Pool is configured?

Total Pool Consumption

Pool Automatic Deletion Policy

Snapshot Pool Consumption

Explanation
The snapshot option that is set automatically when a pool is configured is the Pool Automatic Deletion Policy.
This option determines how the system handles the deletion of snapshots when the pool reaches a certain threshold of capacity utilization. The user can choose between three policies: Never Delete, Delete Oldest, or Delete LowestPriority. The Total Pool Consumption and the Snapshot Pool Consumption are not snapshot options, but rather metrics that show the amount of pool space consumed by the pool data and the snapshots respectively.
References: [Dell EMC Unity: Storage Pools and RAID Groups], [Dell EMC Unity: Snapshots and Thin Clones]

NO.33 A storage administrator must configure replication from a production Dell Unity XT 680F to an offsite DR Dell Unity XT 480. Block resources must be replicated without data loss if the production site becomes unavailable. File resources can be replicated with an acceptable amount of data difference on the destination.
What replication configuration meets the requirements?

Set Unisphere resource filtering to All.

Configure the replication connection mode to Both.

Set an RPO of 0 on the synchronous replication sessions.

Configure the replication interfaces on the 4-port mezzanine card.

Explanation
To meet the requirements, the replication connection mode must be set to Both, which allows both synchronous and asynchronous replication sessions to be configured on the same connection. This way, block resources can use synchronous replication, which ensures zero data loss, and file resources can use asynchronous replication, which allows some data difference on the destination. Setting Unisphere resource filtering to All is not necessary, as it only affects the display of resources in the Unisphere GUI. Setting an RPO of 0 on the synchronous replication sessions is redundant, as synchronous replication always has an RPO of 0. Configuring the replication interfaces on the 4-port mezzanine card is not relevant, as it only affects the performance and availability of the replication network.
References: [Dell EMC Unity: Replication Technologies], [Dell EMC Unity: Unisphere Overview]

NO.34 What is the correct sequence of steps to provision storage for SMB NAS clients?

Explanation

The correct sequence of steps to provision storage for SMB NAS clients is:
Group hard drives into storage pools. This allows you to create a pool of storage resources that can be allocated to different types of storage objects, such as NAS servers, file systems, and LUNs.You can create different pools based on the performance and capacity requirements of your applications1 Create a NAS server for an existing pool. A NAS server is a logical entity that provides file-level access to clients using SMB, NFS, or FTP/SFTP protocols. You need to create a NAS server before you can create file systems and shares.You can specify the pool, network settings, domain membership, and other properties for the NAS server2 Create file systems and file system shares based on the supported NAS protocol. A file system is a logical container that stores files and folders on a NAS server. A file system share is a logical representation of a file system that can be accessed by clients using a specific protocol. For SMB NAS clients, you need to create SMB file system shares that support the SMB protocol.You can configure the share name, permissions, access policies, and other settings for the SMB share3 Map the shared file system to the client. This allows the client to access the files and folders on the SMB share using a drive letter or a UNC path.You can use the Windows Explorer or the net use command to map the shared file system to the client4

NO.35 Multiple I/O modules must be installed in Dell Unity XT 680 storage.
Which module must be installed in slot 0?

4-Port 25 Gbps Ethernet

4-Port 16 Gb Fibre Channel

4-Port 10 Gbps Ethernet

12 Gb/s SAS back-end

Explanation
The Unity XT 680 system supports four types of I/O modules: 12 Gb/s SAS back-end, 4-Port 16 Gb Fibre Channel, 4-Port 25 Gbps Ethernet, and 4-Port 10 Gbps Ethernet. The 12 Gb/s SAS back-end module provides connectivity to the disk drives and expansion enclosures, while the other three types of modules provide network connectivity to the hosts and clients. The Unity XT 680 system has six I/O module slots, three for each SP. The 12 Gb/s SAS back-end module must be installed in slot 0 of each SP, and the other modules can be installed in slots 1 and 2 of each SP. Therefore, the correct answer is D. 12 Gb/s SAS back-end. References
:
Dell EMC Unity XT: Hardware Information Guide
Dell EMC Unity XT: Installation Guide

NO.36 What three VMware datastore types can be defined by using UI or CLI interfaces from the Dell Unity XT platform? (Choose three.)

vVol (Block)

NFS (File!

VMFS (Block)

SMB

RDM

Explanation
VMware datastore is a logical container that holds virtual machine files and other data. There are three types of VMware datastore that can be defined by using UI or CLI interfaces from the Dell Unity XT platform:
vVol (Block): A vVol datastore is a block-based storage object that is formatted with the VMware Virtual Volumes (vVol) framework and used to store virtual machine files and metadata. A vVol datastore can be created by using the Unisphere UI or the UEMCLI interface on the Dell Unity XT system. A vVol datastore can provide granular control, policy-based management, and improved performance for virtual machines.
NFS (File): An NFS datastore is a file-based storage object that is formatted with the Network File System (NFS) protocol and used to store virtual machine files and other data. An NFS datastore can be created by using the Unisphere UI or the UEMCLI interface on the Dell Unity XT system. An NFS datastore can provide scalability, flexibility, and efficiency for virtual machines.
VMFS (Block): A VMFS datastore is a block-based storage object that is formatted with the VMware File System (VMFS) and used to store virtual machine files and other data. A VMFS datastore can be created by using the Unisphere UI or the UEMCLI interface on the Dell Unity XT system. A VMFS datastore can provide high performance, reliability, and compatibility for virtual machines.
References:
Dell EMC Unity: VMware ESXi Hosts and Clusters
Dell EMC Unity: Unisphere Overview
Dell EMC Unity: Unisphere CLI User Guide

Loading …