[Apr 25, 2022] Genuine NS0-592 Exam Dumps New 2022 Network Appliance Pratice Exam [Q30-Q49]

Rate this post

[Apr 25, 2022] Genuine NS0-592 Exam Dumps New 2022 Network Appliance Pratice Exam

New 2022 Realistic NS0-592 Dumps Test Engine Exam Questions in here

NEW QUESTION 30
The error message shown below is reported in the EMS log file.
“[sis.changelog.full:warning]: Change logging metafile on volume DATA1 is full and can not hold any more fingerprint entries.” What are two ways to solve this problem? (Choose two.)

Clear the changelog manually so that the operation can restart.

Increase the size of the changelog to allow the operation to continue.

Modify the storage efficiency policy so that deduplication runs more frequently.

Modify the threshold that triggers a deduplication operation.

NEW QUESTION 31
For restore purposes, a storage administrator on an ONTAP system created a FlexClone of a volume that contains a LUN from a specific snapshot. This LUN cannot be seen by a Windows client after a disk rescan is performed by using Disk Management.
In this scenario, which statement is correct?

The cloned LUN must be brought online.

The cloned LUN needs to be mapped to an initiator group.

The cloned volume must be split from the source volume before the LAN can be used.

The cloned LUN must be renamed to a different name than the name of the source LUN.

NEW QUESTION 32
A customer has a 2-node MetroCluster. They experienced a complete power loss at site B.
The customer has lost connectivity to site B and now realizes that the DR partner at site A has not taken over the DR partner at site B.
Which two actions must be performed in this scenario? (Choose two.)

On the DR partner at site A, perform the process to switchover.

Ensure that site B is prevented from serving data or simply powered off (nodes and disk shelves).

On the DR partner at site A, perform the process to heal the data aggregates.

On the DR partner at site B, perform the process to heal the root aggregate.

NEW QUESTION 33
At a customer site, the storage failover giveback command fails when giving back the root aggregate.
What would be two reasons for this failure? (Choose two.)

There are active NFS connections.

There are failed disks.

The HA interconnect is not operational.

There are active SIS operations running.

NEW QUESTION 34
Which two statements are true about a data volume? (Choose two.)

A data volume can be accessed by a LIF on any node.

A data volume can be moved to any aggregate with space for it in the cluster.

A data volume can be accessed by a user connected to any SVM.

An SVM root or root load sharing mirror volume must be present on every node.

NEW QUESTION 35
In a 4-node cluster, nodes 1 and 2 are an HA pair, and nodes 3 and 4 are an HA pair. The following error appears in the log.
12/15/2018 15:48:47 node-2CRITICALclam.node.ooq: Node (name=node- 2, ID= 1001) is out of “CLAM quorum” (reason =quorum update).
In this scenario, which two statements are correct? (Choose two.)

All LUNs are offline in the cluster.

All LUNs are online in the cluster.

Node 1 takes over node 2.

Node 2 takes over node 1.

NEW QUESTION 36
Click the exhibit button.

You are investigating an AutoSupport Disk Redundancy Failed alert. Cluster A lost connectivity to storage bridge BrB1, while cluster B lost connectivity to storage bridge BrA1.
Referring to the exhibit, which three components need investigation? (Choose three.)

storage bridges BrB1

FC switch SwA1

FC switch SwB1

FC switch SwA2

ISL cables

NEW QUESTION 37
Click the exhibit button.

A customer is reporting that numbers in the statistics volume show command output appear to be incorrect.
Referring to the exhibit, which statement is correct?

The problem is due to a difference in operation size.

Perfstat should be used to explain the behavior.

There are operation types that are not listed in the output.

A case with NetApp should be raised to find the root cause.

NEW QUESTION 38
Click the exhibit button.

When you log in to a node, a warning is displayed as shown in the exhibit.
Which statement is correct in this scenario?

The node root volume was moved to a new aggregate.

The partner still hosts the CFO aggregate for the node.

One or more RDB db files are damaged due to an internal software error.

The node cannot communicate with the rest of the nodes in the cluster.

NEW QUESTION 39
In a 4-node MetroCluster cluster, both clusters are alerting that the connection to an ATTO bridge is lost.
Which three components should be verified to determine what is causing this problem? (Choose three.)

the SFPs that are connecting the ATTO bridge to the switch

the dark fiber cables between sites

the ATTO bridge

the SFPs in the storage controllers

the fiber cable that is connecting the ATTO bridge to the switch

NEW QUESTION 40
A non-maskable interrupt event occurs. The system panics and then reboots.
In this scenario, what would have caused the panic?

a secd process

a watchdog timer

an ICMP blackhole detector

a volume location distributed database

NEW QUESTION 41
A customer calls you about a performance issue that they experienced over the past few days. They want to know if data collection and root cause analysis (RCA) is possible for this issue. This issue appears to be a one time event.
Which tool would be used to satisfy the customer’s request?

perfstat

perfmon

OneCollect

Performance Archive

NEW QUESTION 42
Click the exhibit button.

A customer has an FC SAN with brocade switches. Each server attached to the SAN gas four FC ports. The customer describes that one of their servers has only four paths to the LUNs configured on the cluster. There should be eight paths on all the other servers. The switch administrator has verified the zone configuration.
Referring to the exhibit, which two actions would you perform to troubleshoot the problem? (Choose two.)

Review the LIF configuration on the cluster.

Review the driver version on the server.

Review that the host side FC link ports are enabled.

Review the igroup configuration on the cluster.

NEW QUESTION 43
A field support engineer has just replaced the IOXM on NODE2 on a FAS8080 running ONTAP 9.1. After the replacement, the customer is unable to perform a giveback because the interconnect is down.
In this scenario, which statement is correct?

Verify that there cross-links between the interconnects.

Verify that the installed FC-VI cards are configured properly.

Verify that the interconnect cables on the motherboard are connected correctly.

Verify that the interconnect cables on the IOXM are connected correctly.

NEW QUESTION 44
Click the exhibit button.

A volume move operation has been initiated to move a volume named MirrScr from one aggregate to another.
The operation failed with the error that is shown in the exhibit.
In this scenario, which statement is correct?

Manually trigger the cutover process in order to restart the job.

The volume move cannot be completed at this time because of high use in this node.

There are too many snapshots on the source volume.

Cancel and restart the volume move operation.

NEW QUESTION 45
The root aggregate on your single-node ONTAP cluster failed. You have the configuration backups saved on your FTP server?
In this scenario, which two steps are part of the recovery procedure? (Choose two.)

Perform a Netboot using the configuration backup.

Create a new aggregate and set its ha_policy option to sfo.

Boot into maintenance mode.

Create a new root aggregate and set its ha_policy option to cfo.

NEW QUESTION 46
Click the exhibit button.

Your customer has severe latency on one of their SATA aggregates. You run the statit -b and statit -e commands to obtain detailed disk statistics.
Referring to the output shown in the exhibit, which disk would be the problem?

0a.11.19

0a.11.21

0a.13.21

0a.11.23

NEW QUESTION 47
A customer is attempting to move from NFSv3 to NFSv4.x and reports that all attempts to mount using NFSv3 continue to be successful, however, all of their NFSv4.x mount attempts fail with an “access denied” error.
Which two statements would cause this error? (Choose two.)

The NFS server does not have NFSv4 enabled.

The SVM’s root volume allows execute access for all users.

The export policy applied to the data volume does not allow clients to access it using NFSv4.

The export policy applied to the SVM’s root volume does not allow the NFSv4 clients to access it.

NEW QUESTION 48
Click the exhibit button.

A customer reports that storage latency has recently increased substantially. No changes have been introduced, and the traffic did not change.
Referring to the output shown in the exhibit, which corrective step should be taken?

Add more spindles.

Throttle the client traffic.

Perform the volume reallocation.

Move some volumes off the affected aggregate.

NEW QUESTION 49
A customer mentions that their intercluster SnapMirror replication operations consistently take much longer than normal. While troubleshooting, you want to initiate a test SnapMirror session to collect performance data.
How would you accomplish this task?

Run the network test-path command to simulate a SnapMirror connection and record the latency/throughput data.

View the active network connections to the node to see if there a large number of active connections.

Use the ifstat command to collect network performance data for the physical interface.

Run the network statistics lif show command for the intercluster LIF to simulate a network connection.

Loading …