Updated Apr 16, 2022 Verified Pass NS0-183 Exam in First Attempt Guaranteed [Q10-Q32]

Rate this post

Updated Apr 16, 2022 Verified Pass NS0-183 Exam in First Attempt Guaranteed

Free NS0-183 Sample Questions and 100% Cover Real Exam Questions (Updated 61 Questions)

NO.10 You are a NetApp Professional Services engineer, employed by NetApp. You have just completed an ONTAP cluster installation. You need to collect the relevant configuration information to enable the Service Event Report (SER) to be created.
Which tool would you use to accomplish this task?

Active IQ scheduled reports

NetAppDocs output report

ONTAP System Manager

Active IQ Config Advisor worksheet

https://library.netapp.com/ecmdocs/ECMP1307349/html/GUID-08047CFA-4D59-4E35-B232-1B5FDBBBE0F0.html

NO.11 Which three components are required when setting up a new ONTAP cluster? (Choose three.)

password

cluster management IP

node management IP

Advanced Drive Partitioning

intercluster IP

NO.12 An ONTAP cluster is installed at a secure site. The array has no access to the Internet but is managed 24/7 by onsite engineers. The customer requires that when hardware failures occur, the failures are reported to the NetApp Support team as quickly as possible.
In this scenario, which two tasks should be performed during the project hand-off procedure to satisfy the customer’s requirement? (Choose two.)

Ensure that Active IQ Config Advisor is installed.

Ensure that the onsite engineers receive EMS alerts when hardware issues occur.

Educate the onsite engineers about invoking the AutoSupport tool from ONTAP System Manager.

Educate the onsite engineer about how to manually log support calls.

NO.13 You are installing a new ONTAP 9.7 cluster and attaching the cluster to two separate networks. Your customer has indicated that the same range of client IP addresses are used on both networks and that the networks are never allowed to communicate with each other.
In this scenario, which ONTAP feature must be configured to securely allow all clients to access ONTAP NAS protocols?

routing

BGP

broadcast domains

IPspaces

NO.14 You are installing a new FAS2750 cluster with 24 HDDs for a customer to run a NAS workload. The customer requests that the HA pair have only a single aggregate that is located on Node 1. Maximum capacity is required.
Which action must be performed to ensure that the customer’s requests are satisfied?

Perform a takeover of Node 2 to ensure that it does not run.

Assign all data LIFs to Node 1.

Assign all the partitioned disks from Node 2 to Node 1, and create a single aggregate.

Assign all the data partitions from Node 2 to Node 1, and create a single aggregate.

NO.15 When planning the installation of a new ONTAP 9.5 cluster for a customer, which three steps should you perform? (Choose three.)

Complete a Service Event Report.

Use Config Builder to create a configuration spreadsheet.

Review the hardware components in Hardware Universe.

Open a support case to prepare for the installation.

Search for Technical Support bulletins for the hardware.

NO.16 You are cabling two Cisco 3232C switches for the cluster interconnect of a 4-node AFF A800 cluster.
Which pair of ports are used to cable the Inter-Switch Link (ISL) between the switches?

1/21 to 1/24

0/13 to 0/16

1/31 and 1/32

0/1 and 0/2

NO.17 You want to ensure the highest path resilience and performance increase to the storage stack on your FAS8700 cluster.
In this scenario, which two types of stack cabling are available to use? (Choose two.)

quadpath HA

mixed-mode

single path

multipath HA

NO.18 While preparing for a new ONTAP installation, you discover an issue with the controllers that are running ONTAP 9.5. The issue is not affecting controllers that are running ONTAP 9.4 with the latest patch version. In this scenario, which two steps should you perform to solve the problem? (Choose two.)

Review the issue with the customer’s deployment to see if it would be affected.

Inform your customer that they must always install the latest supported ONTAP release.

If the controllers are in a Product Support Bulletin with ONTAP 9.5, open a case and wait for support to provide a patch release.

Download ONTAP 9.4 with the latest patch version and ONTAP 9.5 for an eventual rollback on the day of the installation.

NO.19 Which hot-swappable transceiver is required to obtain full performance from a Cisco Nexus 3232C cluster-interconnect switch?

QSFP28

QSFP+

SFP+

SFP

NO.20 You want to create a new intercluster LIF for cross-cluster replication and use the CLI. After you create the nac101_intercluster_lif_icl LIF, you are not able to see the LIF in the list of local intercluster LIFs.

Referring to the exhibit, what is the problem?

The assigned port for the intercluster e1c LIF is in the down admin state.

The intercluster LIF has assigned an IP address that is not in the intercluster VLAN.

The LIF that was created has the wrong role type.

The home node of the new intercluster LIF has reached the maximum of four intercluster LIFs.

NO.21 Click the Exhibit button.

You have an 8-node cluster, and sometimes the data LIFs fail over to a non-working port.
Referring to the exhibit, what must you do to solve this problem?

Configure more than one IPspace.

Configure the MTU consistently across the cluster.

Configure the correct Ethernet ports in all broadcast domains.

Configure the LIFs using separate home nodes.

NO.22 After completing a technology refresh, you need to schedule a knowledge transfer with a customer. The customer asks you to address a number of topics during the meeting.
In this scenario, which two topics would be appropriate to address? (Choose two.)

performing database application data migrations

logging the customer support calls

accessing internal NetApp KB articles

registering for access to the NetApp Support site

NO.23 While installing a new AFF A400 HA pair, you are unable to add an NTP server from another subnet. You are able to ping the NTP server from the new cluster.
In this scenario, what are two causes of this problem? (Choose two.)

The admin SVM has the wrong gateway.

A firewall is blocking port 123.

The time skew is too great.

The cluster management LIF needs to be in a different IPspace.

NO.24 You have a 6-node ONTAP 9.1 cluster with two FAS6290 nodes and four FAS8080 EX nodes using a SAN protocol.
In this scenario, how many FAS9000 HA pairs would be joined to this cluster?

NO.25 You want to create a new intercluster LIF for cross-cluster replication and use the CLI. After you create the nac101_intercluster_lif_icl LIF, you are not able to see the LIF in the list of local intercluster LIFs.

Referring to the exhibit, what is the problem?

The assigned port for the intercluster e1c LIF is in the down admin state.

The intercluster LIF has assigned an IP address that is not in the intercluster VLAN.

The LIF that was created has the wrong role type.

The home node of the new intercluster LIF has reached the maximum of four intercluster LIFs.

NO.26 You are planning to install a new ONTAP 9.7 All SAN Array (ASA) into your existing data center.
In this scenario, which cluster configuration is allowed with ASA controllers?

Add the ASA controllers to an existing 4-node cluster with NAS licenses.

ASA controllers can only be added to clusters that have existing SAN licenses.

ASA controllers can only be installed as a standalone HA pair.

Add the ASA controllers to an existing 10-node cluster.

NO.27 You install a new FAS2650 HA with a DS224C disk shelf and ONTAP 9.5 on a customer site.

Referring to the exhibit, which steps are required to get an HA cabled system?

1. Insert a cable from right controller port 0a to IOMB port 2, and from port 0b to IOMA port 4. 2. Insert a cable from left controller port 0a to IOMA port 2, and from port 0b to IOMB port 4. 3. Cable the out-of-band ACP.

1. Insert a cable from right controller port 0a to IOMA port 1, and from port 0b to IOMB port 3. 2. Insert a cable from left controller port 0a to IOMB port 1, and from port 0b to IOMA port 3.

1. Insert a cable from right controller port 0a to IOMB port 1, and from port 0b to IOMA port 4. 2. Insert a cable from left controller port 0a to IOMA port 1, and from port 0b to IOMB port 4. 3. Cable the out-of-band ACP.

1. Insert a cable from right controller port 0a to IOMB port 2, and from port 0b to IOMA port 3. 2. Insert a cable from left controller port 0a to IOMA port 2, and from port 0b to IOMB port 3.

NO.28 You complete a hardware installation on a CN1610 switch and establish a serial connection to the RJ45 port.
In this scenario, the established serial connection allows the installer to complete which two tasks for the switches initial configuration? (Choose two.)

to view network information that has been dynamically assigned to the management interface by the DHCP server on the network

to use the serial port connection as a diagnostic channel to the second CN1610 switch in the cluster interconnect

to configure the switch with another CN1610 switch using Cross-Stack EtherChannel configuration for load balancing and performance

to manually configure the static network information

NO.29 You use the system health subsystem show command to troubleshoot your newly installed ONTAP cluster.
In this scenario, which two health outputs would this command show you? (Choose two.)

data switch cabling

cluster switch cabling

shelf connectivity

node CPU utilization

NO.30 After an initial setup, you want to create a new data aggregate. The node has thirty-one 4 TB SATA spare disks assigned. Your customer wants to have two spare disks.
In this scenario, which two settings would you use to reach the maximum capacity and availability? (Choose two.)

-maxraidsize 31

-raidtype raid_tec

-raidtype raid_dp

-maxraidsize 29

NO.31 A customer has an AFF A800 with 24 internal drives and is running out of storage capacity.
In this scenario, which action will solve this issue?

Insert more internal NVMe SSD drives.

Attach an additional DS212C shelf, filled with drives.

Attach an additional DS460C shelf, filled with drives.

Insert more internal SSD drives.

NO.32 When you install a new ONTAP 9.7 4-node cluster, which network type is required?

data network

peering network

cluster interconnect

intercluster network

Loading …