Unique Top-selling AD01 Exams – New 2022 Blue Prism Pratice Exam [Q24-Q43]

ExamBoosts June 9, 2022 AD01 > Blue Prism 0

Rate this post

Unique Top-selling AD01 Exams – New 2022 Blue Prism Pratice Exam

Blue Prism Developer Dumps AD01 Exam for Full Questions – Exam Study Guide

NO.24 Consider the following process flow:

Decision “A” properties are:

Decision “B” properties are:

Decision “C” properties are:

What will happen when the process runs?

The flow will pass through calculation stage “A”

The flow will pass through calculation stage “B”

The flow will pass through calculation stage “C”

An exception will be thrown

NO.25 You identify an element in Application Modeller and it highlights uniquely and can be used in your object flow diagram. The next day you find that Blue Prism cannot no longer identify the same element, your object flow is giving you ‘Element not found’ exceptions. Which of the following statements is true?

This must be an environment issue. The Blue Prism environment must be consistent and persistent, and an element that worked one day and does not work the next day suggests the environment is changeable.
The IT team supporting the environment needs to be contacted to fix the problem.

The Blue Prism product support team should be contacted to report the issue. This signifies an inconsistency in how the Blue Prism product is working which needs to be fixed.

This suggests that Best Practice exception handling has not been implemented in the object. A retry loop around the object stages that are using the element will probably fix the problem

It is common for consistency issues to be found during configuration/development testing. The most likely cause is that an attribute has been selected for the element that is changeable, such as a window title with a date, or a URL The developer needs to ensure that any changeable attributes are unticked.
Reason: This is happening when identifying the elements in application modeler some of the details which are changing on the different environment and while identifying the elements in application modeler the developer takes the element whose values are changing and when the application run on the different path at that point of the time the process is able to expecting values eg same url, date or title but it is not at there so the process terminates. Follow the best practice for this.

NO.26 Which of the following indicates a case in a Work Queue is an exception?

Explanation/Reference:

NO.27 Study the following Process flow:

The Process flow is intended to test the value of the Input data item to determine if it falls within a range of numbers, and then assign a value as an output. The number ranges are defined as between 1 to 100, between 101 to 200, and anything outside these ranges.
The Calculation stages will set the value of the Result data item to 1, 2 or 3.
To enable the Process flow to work correctly, what is the correct expression for the Choice stage branch named ‘Between 1 and 100’?

[Input] >= 1 AND [Input] <= 100

[Input] >= 1 AND <= 100

[Input] >= ‘1’ AND [Input] <= ‘100’

[Input] >= 1 [Input] < 100

[Input] BETWEEN 1 AND 100

NO.28 Examine the Process below:

An error has been encountered on Page1 and the exception has bubbled up to be recovered in the Recover1 stage. If there is an error in the Calc1 stage which path will the Process take?

The Process will continue to the Resume1 Stage

The Error will cause the Process to terminate

The Error will be recovered in the Recover2 Stage

The Error will cause the Process to jump to the End Stage

NO.29 How can a session variable value be updated when a process is running? (Choose all that apply.)

By using the Internal – Session Variables business object.

By pausing the Session Variables work queue.

By updating the value in Credential Manager.

By updating the value in Control Room.

NO.30 The Saved Quantity Data Item is configured as a number with the initial value 0.
The Loop Orders stage is configured to loop though the Orders collection.
The Get Quantity stage is configured as follows:

What will the data item Saved Quantity contain after the execution of the page?

NO.31 Examine the following Process flow:

This is the Main Page of a simple process which calls the ‘Calculation’ Page before completing.
The data items are configured as follows:
Value-1 is a number data item with an initial value of 100.
Value-2 is a number data item with an initial value of 4.
Result is a number data item with no initial value.
The Calculation Page Reference stage is configured as follows:

The Calculation Page is configured as follows:

The Data Items are configured as follow:
Value-1 is a Number data item with an initial value of 200
Value-2 is a Number data item with an initial value of 4
Result is a Number data item with no initial value
The Start stage is configured to pass through the Value-1 and Value-2 values as input parameters.
The ‘Divide’ Calculation stage expression is [Value-1] / [Value-2]
The End stage is configured to pass back the value of the Result data item as an output parameter.
What will be contained in the Result data item on the Main Page following the execution of the Process?

37.5

NO.32 Which of the following flows can you not create in Blue Prism? (select 2 responses) A:

B:

C:

D:

Option A

Option B

Option C

Option D

NO.33 When entering an option within the Training Order system the relevant option number is entered into the Option number field as below The Option number input field has been spied in Blue Prism:

The following attribute set has been returned by Application Modeller:

Which Attribute can be un-ticked to ensure consistent visibility of the element to Blue Prism?

Window Text

Visible

Screen Visible

Class Name

Explanation
Reason: As the window text is not unique when the value is changed and bp is able to spied at time a error would come. So there is no use of window text.

NO.34 Consider the following process flow from the Main Page of a process in Process Studio:

Thinking about the standard Blue Prism Process Templates, what is wrong with this Main Page process flow?

There is nothing wrong with the Main Page flow shown in the image, it is a copy of Blue Prism’s standard Process Template

The Stop? decision stage should be removed from the process flow, as Stop time is Configured either within the Scheduler process are stopped via Control Room.

The Mam Page process flow is too high level For better visibility of the process logic the flow steps hidden m the sub-pages should al be on the main page instead.

There is no exception handling on this Main Page so any exceptions that “bubble up” will cause the process to terminate rather than exceptions being handled correctly.

The Reset Global Data page is not required because sub-page within a process should always use input parameter rather than global data items. There should be no global data to reset.

NO.35 How would you run a Blue Prism Process on a virtual Digital Worker?

Through Control Room

Through the Digital Worker Management Console

Through System Manager

Through Process Studio

Through Object Studio

NO.36 Which of the following Stages can be found in Process Studio AND Object Studio?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

Reason: Only the choice stage is found in both process and object studio rest all other stages are found only in the object studio.

NO.37 A Blue Prism solution works fine when developing and testing it in Process and Object Studio, but when it is run in Control Room, exceptions occur because elements are not being found.
What is the most likely cause of this behaviour?

The target application has changed in design

Intelligent Wait stages have not been used in line with Blue Prism best practices within Business Object Actions

The Business Object Action has not been published, therefore, it cannot be used by a Process in Control Room.

Exception handling best practice has not been incorporated into the Process design

NO.38 How can a session variable value be updated when a process is running? (select all that apply)

By using the Internal – Session Variables business object.

By pausing the Session Variables work queue.

By updating the value in Credential Manager.

By updating the value in Control Room.

Explanation
Reason: Session variable values to be update only in the Control room.
Below is the reference.

NO.39 Consider the following flow in an object:

Which of the following statements are true?

There just needs to be a wait stage after the start stage to correct this action.

There should be a wait stage after every stage in this flow (i.e. after the navigate, read, write stages.

If during testing in object studio this flow works, no additional wait stages should be added as they will slow the interface down.

There should be an intelligent wait stage after the start stage and after any stage that cause the application we are interfacing with to change

Intelligent wait stage should always be used after every stage and that should be minute wait to overcome the lag when the application runs and on wait should only be used when some of action interfacing the screens or any updating is going on as per the best practices pdf

NO.40 In which of these scenarios is it ok not to use a Blue Prism work queue as part of your Blue Prism solution?

A Blue Prism work queue is not required for simple linear processes that do not work multiple cases.

A Blue Prism work queue should always be used. It eliminates the risk of contention and allows you to gracefully pause the queue at any time.

A Blue Prism work queue is not required if the business process interfaces with a Work List system with in- built capability to ensure multiple users cannot work the same case at the same time.

A Blue Prism Work Queue decreases the scalability of the solution and therefore should only be used for complex scenarios such as multi-day processing.

Explanation/Reference:

NO.41 Consider the following process flow:

What is the problem with this flow?

There is nothing wrong with this flow.

The exception handling in this flow can be removed because an Attach action in a navigate stage should always work if configured correctly

The Attach Block should be enlarged to also include the ‘Waited Long Enough?’ decision stage.

The flow contains a recover stage and a route from it without a resume stage. This will cause internal error on future exceptions thrown in the same session.

The 0.5 second wait stage should be removed so that the retries can be performed at full speed.

NO.42 Examine the following recover flow taken from a Blue Prism Process:

The ‘Exception Type’ data item has no initial value and has a data type of text.
The Calculation stage ‘Save Exception Type’ will output the current exception type to the ‘Exception Type’ data item.
What expression would you use in the ‘Save Exception Type’ stage to achieve this?

ExceptionDetail
Reference:
https://bpdocs.blueprism.com/bp-6-8/en-us/helpExceptions.htm

NO.43 According to Blue Prism best practice which of the following information would be appropriate to store in a Work Queue tag? (select 3 responses)

Something that identifies the type of work that was performed Example tags might be: Funds Transferred, SIM Card Requested, Account, Closed, Account Suspended, Account Noted

Something that identifies exact datetime of a step in the process. Example of tags might include Account Closed 20/03/2017 12:12:16, Work Completed 20/03/2017 12:12:16: Request Loaded 20/03/2017 12:12:16

Something that identifies the source of work. Example of tags might include: Email, Web Form, Excel Adhoc. Database

Something that identifies the client record to make work queue items easier to search. Example tags might be a phone number, customer reference number or ID, customer full name. For example: +4407994446767, 00023231 A; Mr John A Smith

Something that identifies the type of process scenario. Example of tags might include: Invalid Product, Unrecognised customer, Goneaway Marker, Invalid Status

Details of an exception that has occurred. For example: The Login Screen was not found.

Loading …

Introduction

Blue prism has meticulously designed the certification outline that mainly focuses on the below areas.

Life cycle Orientation
Developer Best Practice
Object Layer Design
Work Queues Guide
Exception Handling Guide

Most of the Blue prism certification exam questions for the developer exam (AD01) are based on the above topics. However, apart from the above sections, candidates need to have a fair idea on the topics like

Internal calculation functions of Blue Prism
Session management and control Room resource
Object development and application modeling

It is advised from Blue prism that the candidate must complete Blue prism developer Foundation training along with self-assessment to get the proper idea on Blue prism accreditation questions and answers for successful completion of the certification exam

Best way to practice test for Blue Prism AD01: https://www.examboosts.com/Blue-Prism/AD01-practice-exam-dumps.html