Network Appliance NS0-516 Premium Exam Engine pdf – Download Free Updated 66 Questions [Q30-Q53]

4.3/5 - (3 votes)

Network Appliance NS0-516 Premium Exam Engine pdf – Download Free Updated 66 Questions

Verified NS0-516 Bundle Real Exam Dumps PDF

The NS0-516 Exam is a 90-minute multiple-choice test that contains 60 questions. The passing score for the exam is 70%, and the test is available in several languages, including English and Japanese. NS0-516 exam is administered through Pearson VUE, a leading provider of computer-based testing services.

NO.30 Click the Exhibit button.

An administrator is asked to create a 5532 GiB volume from the volume group.
Referring to the exhibit, how would the administrator complete this request?

Create the volume after performing space reclamation

Create the volume after consolidating the capacity

Create the volume from the available capacity

Create the volume after adjusting the preservation capacity

NO.31 You are cabling drive expansion shelves for an E2800 storage system.
In this scenario, which cabling method should you use?

You use SAS expansion port EXP1 and reserve SAS expansion port EXP2 for a second drive expansion stack.

The controller A and the controller B SAS expansion ports (EXP1 & EXP2) should be divided between the A-side and B-side IOM-12 modules for all the expansion shelves.

You use SAS expansion port EXP2 and reserve SAS expansion port EXP1 for a second drive expansion stack.

The controller A and the controller B SAS expansion ports (EXP1 & EXP2) should not be divided between the A-side and B-side IOM-12 modules for all of the expansion shelves.

Explanation
Reference https://library.netapp.com/ecm/ecm_download_file/ECMLP2773537

NO.32 Exhibit:

Referring to the exhibit, which SAS connector is supported on the NetApp E2800 E-Series family?

NO.33 If an FDE disk fails, which characteristic is required of the replacement disk?

Must be FDE capable

Must be loaded with DACstore

Must be of a greater capacity

Must be T10-P1 capable

NO.34 Exhibit:

A customer’s host is running a Red Hat Enterprise Linux 7.6 server with dm-mp configured for ALUA and is connected to a single volume on the EF280 system that is shown in the exhibit.
In this scenario, how many active/optimized paths are available to the volume?

NO.35 Which three methods can be used to increase the space available to clients? (Choose three.)

Increase volume segment size

Convert RAID-6 volume group to RAID-5

Create new volume groups from unconfigured capacity

Fill empty drive slots in the array

Replace some HDD with SSD

NO.36 What mechanism governs control of the E-Series storage premium features? (Choose the best answer.)

simple password system

special USB flash drive that must be inserted into the controllers

small toggle switches on the controller boards inside the system

key file obtained from vendor and passed to system via SANtricity

online database requiring the controllers to access the internet to activate features

NO.37 Is this E5624 storage system cabled according to recommended practices? If not, why?

Yes. The cabling configuration is correct.

No. The controllers should be cabled to the last disk shelf first.

No. Each controller is only cabled to one set of ESMs in the disk shelves.

No. Controller A should be cabled to the right ESMs, instead of the left ESMs and Controller B should be cabled to the left ESMs instead of the right ESMs.

NO.38 Where does the explicit multipath driver reside?

on the I/O host

on the storage manager host

host on the storage manager client

in the controller’s memory

NO.39 Which three documents should be provided to the customer after the e-Series installation is complete?
(choose three.)

a document showing how much space is available for system expansion

a b a document with IMT pages that show the supported host configuration and fabric switches in the solution

a document showing available power on the UPS with no equipment connected

a document showing the cabinet layout with cabling information and IP addresses being used

a document showing user IDs and passwords for all deployed devices

NO.40 According to NetApp recommended practices, is this E2712 storage system cabled for a dual-stack configuration? If not, why?

No. The cabling to the disk shelves is coming from the host ports.

No. The controllers are only cabled to one “stack.”

No. The cabling has split the top-down-bottom-up configuration.

Yes. The cabling configuration is correct.

NO.41 When you arrive on a customer site, you discover that the customer network administrator has called in sick. While required power has been provided and all of the components ordered have been physically accounted for, the network will not be operational today.
Which would be the most useful tool to complete your rack & stack and initial configuration of the system? (Choose the best answer.)

a Serial Port cable

a CD containing the 10.86 version of SANtricity

a standalone switch or hub

None of the above, come back tomorrow.

NO.42 An administrator is asked to create an asynchronous mirroring environment that supports multiple mirroring relationships, each with different recovery point objectives (RPOs).
In this scenario, how does the administrator create this environment?

The administrator creates a mirror group with the appropriate RPOs

The administrator creates multiple mirror pairs, each with their own schedule and RPO

The administrator creates a single consistency group with multiple RPOs

The administrator creates multiple mirror consistency groups with the appropriate RPOs

NO.43 Review the diagram.

Is this cabling correct or incorrect, and why? (Choose the best answer.)

The cabling is incorrect because the controllers are cabled from the host port.

The cabling is incorrect because it usesthe top-down bottom-up cabling method.

The cabling is correct because it follows the recommended E-Series cabling method.

The cabling is incorrect because they have been daisy-chained.

NO.44 What are two methods for setting the host protocol configuration on the E2800 controller with a 4-port 16Gbps FC or 10Gbps iSCSI SFP+ host interface card (HIC)? (Choose two)

Change the feature pack in the SANtricity System Manager.

Set in the hardware tab using SANtricity System Manager

Set at the factory based on the order.

Change the QSFP type in the HIC

NO.45 A customer needs a system for a new solution that they are designing. They have provided you with the performance and capacity requirements.
In the NetApp Fusion UI, which workflow should you perform to help the customer?

Design a System Manually

Modify Existing Storage

Size and Recommend

Perform a Tech Refresh

NO.46 A customer is configuring an EF570 system on an internal network. Due to security concerns, the network does not have Internet access. The customer wants to regularly send standard support data to NetApp.
In this scenario, what should the customer do to accomplish this task?

Enable AutoSupport with a set interval and with the store locally option selected, manually move the data to a server with Internet access, and then send the data to NetApp.

Open a support ticket with NetApp to enable AutoSupport local functionality, manually move the data to a server with Internet access, and then send the data to NetApp.

Set up a script to initiate Collect Support Data on a set interval, manually move the data to a server with Internet access, and then send the data to NetApp.

Set up a script to initiate Collect Support Data, remove the extra log files, manually move the data to a server with Internet access, and then send the data to NetApp.

NO.47 A host is unable to access volumes as shown in the exhibit.

Which statement is correct in this scenario?

A workload has not been added in SANtricity System Manager.

A pool has not been added in SANtricity System Manager.

A host has not been added in SANtricity System Manager.

A volume has not been added in SANtricity System Manager.

NO.48 Click the Exhibit button.

Referring to the exhibit, which SAS connector is supported on the NetApp E2800 E-Series family?

NO.49 The out-of-band connection is an Ethernet connection from the storage manager host to the LAN, and from the LAN to which location?

port 1 of the I/O host

port 2 of the ESM

port 1 of the controller

port E of the controller

NO.50 When data is written to a snapshot, volume is stored __________. (Choose the best answer.)

on the base volume for that snapshot

on the repository area associated with the snapshot’s corresponding image

on the repository associated with the snapshot volume

on the common repository for the snapshot group

on a hot spare drive

NO.51 A customer is running several EF570 systems and uses the ability of the EF-Series systems to run two host protocols at the same time.
You are installing a new EF570 that uses the NVMe protocol for a high performance computing application. The controller on-board ports will not connect, but the HIC ports are working fine.
In this scenario, what is the problem?

The on-board host ports are disabled

There is a cable fault preventing the on-board ports from connecting

The on-board ports have the wrong SFPs for the desired network protocol

The switch ports are shut-down

NO.52 An E-Series customer can find out when a specific volume was deleted by using the ______. (Choose the best answer.)

Recovery Guru

Major Event Log

Online Help

Storage Array Profile

NO.53 A customer intends to use an E2812 system without expansion shelves. The specification for their Windows host requires that six E-Series data volumes be used.
In this scenario, how should the system be configured?

one DDP with all the volumes

three DDPs with the volumes divided equally

one DDP for each volume

two DDPs with the volumes divided equally

Loading …

Passing the NS0-516 exam is a requirement for obtaining the NetApp Certified Implementation Engineer – SAN Specialist, E-Series (NCIE-SAN E-Series) certification. NetApp Implementation Engineer SAN Specialist E-Series (NCIE) certification validates the skills and knowledge required to implement and manage NetApp E-Series storage systems in enterprise environments. The NCIE-SAN E-Series certification is recognized globally as a standard of excellence in the storage industry, and can help IT professionals advance their careers and increase their earning potential.

Pass Your Network Appliance Exam with NS0-516 Exam Dumps: https://www.examboosts.com/NetworkAppliance/NS0-516-practice-exam-dumps.html