[Q11-Q30] Real Exam Questions H12-351_V1.0 Dumps Exam Questions in here [Oct-2023]

Rate this post

Real Exam Questions H12-351_V1.0 Dumps Exam Questions in here [Oct-2023]

Get Latest Oct-2023 Conduct effective penetration tests using H12-351_V1.0

Huawei H12-351_V1.0 (HCIE-WLAN (Written) V1.0) Exam is an industry-leading certification program designed to validate the skills and knowledge required to design, deploy, and manage large and complex wireless networks. H12-351_V1.0 exam covers a wide range of topics, including WLAN planning and design, WLAN deployment and maintenance, WLAN troubleshooting, and network security. It also tests candidates’ understanding of WLAN technologies, such as WLAN standards, WLAN architecture, WLAN components, and WLAN protocols.

Huawei H12-351_V1.0 certification exam is intended for WLAN professionals who have experience in the field and want to enhance their skills and knowledge to become experts in WLAN technology. HCIE-WLAN (Written) V1.0 certification exam is designed to validate the candidate’s ability to design, deploy, and manage WLAN solutions, troubleshoot WLAN issues, and ensure WLAN security.

QUESTION 11
Which of the following items is not involved in the HLD phase?

Capacity planning

Network design

AP position planning

Deployment planning

Explanation
According to the Huawei documents and resources, the HLD phase is the high-level design phase of a WLAN project. It involves the following items:
Capacity planning: Determines the number and types of devices required for the WLAN network based on the customer’s requirements and network scale.
Network design: Designs the network topology, IP addressing scheme, VLAN division, security policies, and other network parameters for the WLAN network.
Deployment planning: Plans the deployment sequence, schedule, resources, and risks for the WLAN project.
AP position planning is not involved in the HLD phase. It is part of the LLD phase, which is the low-level design phase of a WLAN project. It involves the detailed design of AP positions, antenna types, channel allocation, power adjustment, and other wireless parameters for the WLAN network. Therefore, C is the correct answer. References: :
https://support.huawei.com/enterprise/en/doc/EDOC1100158948/9a0d5c37/wlan-project-design

QUESTION 12
Which of the following methods are used in IPsec to ensure secure transmission of service data on the network through encryption and authentication?

The receiver verifies the identity of the sender.

The receiver rejects old or duplicate packets in order to prevent attacks initiated by malicious users who resend sniffed packets,

The sender verifies the identity of the receiver.

Data integrity is verified.

Explanation
IPsec uses authentication headers (AHs) and encapsulating security payloads (ESPs) to ensure secure transmission of service data on the network. AHs provide authentication and integrity verification for the sender and the receiver, while ESPs provide encryption and optional authentication for the data.
References: https://support.huawei.com/enterprise/en/doc/EDOC1100058940/8a8f1c9b/ipsec

QUESTION 13
On a campus network, which of the following problems may occur when you manually create a static VXLAN tunnel? (Select All that Apply)

Although the static VXLAN tunnel mode supports the distributed gateway scenario, the configuration involves a heavy workload and is complex to adjust.

A static VXLAN tunnel uses related protocols on the control plane, consuming device resources.

If N devices need to establish VXLAN tunnels, you need to manually configure the ingress replication list up to N x (N-l)/2 times.

Remote MAC addresses can be learned only through data flooding.

Explanation
B is false because a static VXLAN tunnel does not use any protocols on the control plane, saving device resources.
References: https://support.huawei.com/enterprise/en/doc/EDOC1100058940/8a8f1c9b/static-vxlan-tunnel

QUESTION 14
Which of the followings is not a roaming optimization solution?

Proactive roaming

Smart roaming

Fast roaming using PMK caching

802.11r roaming

Explanation
Smart roaming is not a roaming optimization solution, but a feature that allows an AP to automatically adjust its transmit power based on signal strength and interference level. The other options are all roaming optimization solutions that can reduce roaming latency and packet loss.
References: https://support.huawei.com/enterprise/en/doc/EDOC1100058940/8a8f1c9b/smart-roaming

QUESTION 15
Drag the short-range wireless IoT technologies on the left to their corresponding descriptions on the right.

Explanation
According to the Huawei documents and resources, the definitions of the short-range wireless IoT technologies are as follows:
ZigBee: IEEE 802.15.4-based wireless communication technology is a short-range, and low-power wireless communication technology that supports star, mesh, and hybrid networking.
Bluetooth: With the emergence of IoT industries such as smart wearables, smart home, and Internet of Vehicles, short-range communication technologies are attracting more and more developers.
REID: Its basic principle is to automatically identify objects based on the transmission characteristics of radio signals and space coupling (inductance or electromagnetic coupling) or radar reflection.
Wi-Fi: Wireless networking technology based on IEEE 802.11 is the most popular WLAN technology.
Therefore, ZigBee – 1, Bluetooth – 3, REID – 2, Wi-Fi – 4 is the correct answer. References: :
https://support.huawei.com/enterprise/en/doc/EDOC1100158948/9a0d5c37/zigbee :
https://support.huawei.com/enterprise/en/doc/EDOC1100158948/9a0d5c37/bluetooth :
https://support.huawei.com/enterprise/en/doc/EDOC1100158948/9a0d5c37/rfid :
https://support.huawei.com/enterprise/en/doc/EDOC1100158948/9a0d5c37/wi-fi

QUESTION 16
With protocol trace, iMaster NCE-Campuslnsight displays protocol-level Interaction details at the phases for wireless users. (Enter the acronyms in capital letters.)

AP, WAC, and AC
With protocol trace, iMaster NCE-CampusInsight displays protocol-level interaction details at the AP, WAC, and AC phases for wireless users.
References: https://support.huawei.com/enterprise/en/doc/EDOC1100058940/8a8f1c9b/protocol-trace

QUESTION 17
Which of the following statements about VXLAN is false?

A Layer 2 VXLAN gateway forwards traffic to a VXLAN network and can also be used for Intra-subnet communication on the same VXLAN network.

Layer 2 and Layer 3 VXLAN gateways must maintain VBDIF interfaces. Otherwise, users cannot communicate with each other through these interfaces.

A VBDIF interface is a logical interface created based on a BD. It is similar to a VLANIF interface on a traditional network.

A Layer 3 VXLAN gateway is used for inter-subnet communication on a VXLAN network and communication with external non-VXLAN networks.

Explanation
B is false because only Layer 3 VXLAN gateways need to maintain VBDIF interfaces for inter-subnet communication on a VXLAN network or communication with external non-VXLAN networks. Layer 2 VXLAN gateways do not need VBDIF interfaces.
References: https://support.huawei.com/enterprise/en/doc/EDOC1100058940/8a8f1c9b/vxlan-gateway

QUESTION 18
In the early phase of a project, after the project requirements are clarified, the project owner should Checklist to describe the customer’s requirements. (Capitalize the first letter of each word.)

Customer Requirement Specification
Customer Requirement Specification (CRS) is a document that needs to be output after the project requirements are clarified. The CRS describes the customer’s requirements in detail and serves as the basis for subsequent project design and delivery.
References: https://support.huawei.com/enterprise/en/doc/EDOC1100058940/8a8f1c9b/crs

QUESTION 19
Which of the following statements about the home agent are true? (Select All that Apply)

The home agent communicates with the gateway on the STAs1 home network at Layer 2.

The home agent communicates with the gateway on the STAs’ home network at Layer 3.

A home AP can function as a home agent of STAs.

A home WAC can function as a home agent of STAs.

Explanation
The home agent is a device that communicates with the gateway on the STAs’ home network at Layer 3 and maintains the binding entries of STAs’ home addresses and care-of addresses. A home WAC can function as a home agent of STAs, while a home AP cannot.
References: https://support.huawei.com/enterprise/en/doc/EDOC1100058940/8a8f1c9b/mobile-ip

QUESTION 20
In a multicast solution, there must be reachable unlcast routes between multicast sources and receivers.

True

False

Explanation
In a multicast solution, there must be reachable unicast routes between multicast sources and receivers, because multicast routing protocols use unicast routing information to build multicast forwarding trees.
References: https://support.huawei.com/enterprise/en/doc/EDOC1100058940/8a8f1c9b/multicast

QUESTION 21
Master NCE-Campuslnsight can comprehensively record and analyze Interference. Which of the following parameters are recorded? (Select All that Apply)

Recommended channels

Interference fulfillment rate

Interference strength

Number of interference SSIDs

Air interface congestion fulfillment rate

Explanation
B and E are not parameters recorded by iMaster NCE-CampusInsight for interference analysis. The other options are parameters recorded by iMaster NCE-CampusInsight to comprehensively record and analyze interference.
References: https://support.huawei.com/enterprise/en/doc/EDOC1100058940/8a8f1c9b/interference-analysis

QUESTION 22
Differentiated network planning needs to be performed to meet requirements of different IoT services in Huawei’s CloudCampus loT solutions. Drag the solutions on the left to their corresponding network planning suggestions on the right.

Explanation
According to the Huawei documents and resources, the network planning suggestions for the solutions are as follows:
Asset management: The RFID signal coverage distance is 25 m. Therefore, RFID signal coverage must be considered during AP deployment planning. Attach RFID tags on the surface or top of assets to prevent signals from being blocked.
ESL: Shelves may be blocked in application scenarios. Therefore, shelf blocking must be considered during network planning. The shelves can be deployed in aisles to minimize obstacles toward integrated base stations.
Smart healthcare: For applications that support regional positioning, positioning devices need to be deployed at key entrances and exits based on service requirements.
Therefore, Asset management – 2, ESL – 1, Smart healthcare – 3 is the correct answer. References: :
https://support.huawei.com/enterprise/en/doc/EDOC1100158948/9a0d5c37/asset-management :
https://support.huawei.com/enterprise/en/doc/EDOC1100158948/9a0d5c37/esl :
https://support.huawei.com/enterprise/en/doc/EDOC1100158948/9a0d5c37/smart-healthcare

QUESTION 23
Which of the following statements about WLAN roaming and signal strength Is false?

Smart roaming can be enabled on the WAC to help ST As roam and associate with APs with better signals.

Generally, a STA roams when it detects that the signal strength is less than -75 dBm.

STAs can roam between WACs in dual-link HSB mode.

In most cases, the signal strength of a STA should range from -45 dBm to -65 dBm.

Explanation
B is false because generally, a STA roams when it detects that the signal strength is less than -70 dBm or -65 dBm, not -75 dBm.
References:
https://support.huawei.com/enterprise/en/doc/EDOC1100058940/8a8f1c9b/wlan-roaming-and-signal-strength

QUESTION 24
Assume that a large enterprise needs to deploy a WLAN to provide wireless access for both employees and guests. However, guest data may pose security threats on the network. Which of the following networking modes is applicable to this scenario?

Navi WAC Networking

Leader AP networking

Mesh networking

Fat AP networking

Explanation
Navi WAC networking is a networking mode that uses a WLAN Access Controller (WAC) to manage and control APs. It can provide different authentication and security policies for different user groups, such as employees and guests. Guest data is isolated from the internal network to prevent security threats.
References: https://support.huawei.com/enterprise/en/doc/EDOC1100064352/9aadccc0/navi-wac-networking

QUESTION 25
As shown in the figure, STA_1 through STA_4 are associated with AP_1, and STA_5 is associated with AP_2. Assuming that the load balancing threshold is 2, the load difference threshold is 25%, and API and AP2 support a maximum of 10 STAs, which of the following statements are true? (Select All that Apply)

The load percentage of AP_1 is 40%, and that of AP_2 is 10%.

The load balancing mechanism needs to be enabled. Then some STAs are steered from AP_1 to AP__2.

If load balancing is performed, the load percentage of AP_1 changes to 30%.

The minimum load percentage is 10%, which is greater than the load difference threshold. Therefore, load balancing needs to be enabled.

Explanation
The load percentage of an AP is calculated by dividing the number of associated STAs by the maximum number of STAs supported by the AP. In this case, the load percentage of AP_1 is 4/10 = 40%, and that of AP_2 is 1/10 = 10%. The load balancing mechanism needs to be enabled to balance the load between AP_1 and AP_2. Then some STAs are steered from AP_1 to AP_2 based on the load balancing threshold and the load difference threshold.
References: https://support.huawei.com/enterprise/en/doc/EDOC1100058940/8a8f1c9b/load-balancing

QUESTION 26
Which of the following components is not included In a typical RFID system?

Information processing platform

RFID tag

Router

RFID reader

Explanation
A router is not included in a typical RFID system. A typical RFID system consists of three components: RFID tag, RFID reader, and information processing platform. The RFID tag is attached to the object to be identified, the RFID reader communicates with the tag and reads its information, and the information processing platform processes and stores the data collected by the reader.
References: https://support.huawei.com/enterprise/en/doc/EDOC1100058940/8a8f1c9b/rfid

QUESTION 27
Drag the reasons for AP onboarding failures on the left to the corresponding troubleshooting operations on the right.

Explanation
According to the Huawei documents and resources, the troubleshooting operations for the AP onboarding failures are as follows:
APS fail to be authenticated by the WAC: Whitelist the APS. The WAC can authenticate APs based on their MAC addresses or SNs. If an AP is not whitelisted on the WAC, it cannot be authenticated and onboarded.
License resources on the WAC are insufficient: Expand the license capacity. The WAC can manage a limited number of APs based on its license. If the license resources are insufficient, some APs cannot be onboarded.
APS fail to obtain IP addresses: Check the DHCP server. The APs need to obtain IP addresses from a DHCP server before they can communicate with the WAC. If the DHCP server is not configured or reachable, the APs cannot obtain IP addresses and onboard.
APS fail to ping the WAC: Check the network between the WAC and APS. The APs need to ping the WAC to discover its IP address and establish a CAPWAP tunnel. If there is a network problem between the WAC and APs, such as incorrect VLAN configuration or firewall blocking, the APs cannot ping the WAC and onboard.
Therefore, APS fail to be authenticated by the WAC – c, License resources on the WAC are insufficient – b, APS fail to obtain IP addresses – d, APS fail to ping the WAC – a is the correct answer. References: :
https://support.huawei.com/enterprise/en/doc/EDOC1100158948/9a0d5c37/ap-onboarding-failures

QUESTION 28
Drag the Huawei’s wireless positioning solutions on the left to their corresponding features and application scenarios on the right.

Explanation
According to the Huawei documents and resources, the features and application scenarios of the wireless positioning solutions are as follows:
Wi-Fi terminal positioning: Performs network-side positioning generally based on the RSSI, but provides low positioning accuracy. This method applies to scenarios such as precision marketing and customer flow analysis in shopping malls.
Bluetooth tag positioning: Runs based on the built-in Bluetooth module of an AP. The AP reports data to a positioning engine for location resolution. This positioning technology provides low positioning accuracy and applies to asset positioning and personnel positioning scenarios.
UWB positioning: Provides high positioning accuracy, and is applicable to scenarios that require high accuracy, such as intelligent manufacturing, warehousing logistics, and mechanical manufacturing.
Bluetooth terminal positioning: Runs based on the built-in Bluetooth module of an AP, which can be implemented on either the network side or terminal side.
Therefore, Wi-Fi terminal positioning – 3, Bluetooth tag positioning – 4, UWB positioning – 2, Bluetooth terminal positioning – 1 is the correct answer. References: :
https://support.huawei.com/enterprise/en/doc/EDOC1100158948/9a0d5c37/wi-fi-terminal-positioning :
https://support.huawei.com/enterprise/en/doc/EDOC1100158948/9a0d5c37/bluetooth-tag-positioning :
https://support.huawei.com/enterprise/en/doc/EDOC1100158948/9a0d5c37/uwb-positioning :
https://support.huawei.com/enterprise/en/doc/EDOC1100158948/9a0d5c37/bluetooth-terminal-positioning

QUESTION 29
Which of the following statements about attack defense is true?

Defense against flood attacks can be used to defend against Ping of Death attacks.

Attack defense allows APs to analyze the contents and behaviors of incoming packets on ports to determine whether packets have attack characteristics. The APs then take defense measures on the packets that have attack characteristics.

Attack defense can defend against spoofing packet attacks, malformed packet attacks, fragmentation attacks, and flood attacks.

Fragmentation attack defense enables a device to detect packet fragments in real time and discard or rate-limit them to protect the device.

Explanation
Attack defense is a feature that allows APs to analyze the contents and behaviors of incoming packets on ports to determine whether packets have attack characteristics. The APs then take defense measures on the packets that have attack characteristics, such as discarding them or limiting their rate. Attack defense can defend against spoofing packet attacks, malformed packet attacks, fragmentation attacks, and flood attacks.
References: https://support.huawei.com/enterprise/en/doc/EDOC1100058940/8a8f1c9b/attack-defense

QUESTION 30
iMaster NCE-Campuslnsight provides Intelligent radio calibration for high-load APs to increase the frequency bandwidth. This function applies to both 5 GHz and 2.4 GHz frequency bands.

True

False

Explanation
iMaster NCE-CampusInsight provides intelligent radio calibration for high-load APs to increase the frequency bandwidth. However, this function applies only to the 5 GHz frequency band, not to the 2.4 GHz frequency band.
References:
https://support.huawei.com/enterprise/en/doc/EDOC1100058940/8a8f1c9b/intelligent-radio-calibration

Loading …

Authentic Best resources for H12-351_V1.0 Online Practice Exam: https://www.examboosts.com/Huawei/H12-351_V1.0-practice-exam-dumps.html

H12-351_V1.0 new study questions pdf H12-351_V1.0 reliable exam test H12-351_V1.0 valid test papers H12-351_V1.0 valid test test new H12-351_V1.0 test certification cost

Previous: Previous post: View All E_HANAAW_17 Actual Exam Questions Answers and Explanations for Free Sep-2023 [Q29-Q47]

Next: Next post: [Oct-2023] ACAMS CAMS Actual Questions and Braindumps [Q41-Q59]

H12-351_V1.0 Practice Tests

[Q11-Q30] Real Exam Questions H12-351_V1.0 Dumps Exam Questions in here [Oct-2023]
[Aug-2023] Practice Huawei H12-351_V1.0 exam. Online Exam Practice Tests with detailed explanations! Pass H12-351_V1.0 with confidence! [Q17-Q40]

Related Certifications

H13-723-ENU Exam Dumps
H12-891_V1.0 Exam Dumps
H19-301_V3.0 Exam Dumps
H12-521_V1.0 Exam Dumps
H13-611 Exam Dumps
H19-338-ENU Exam Dumps
H13-811_V3.0 Exam Dumps
H12-811 Exam Dumps
H13-723_V2.0 Exam Dumps
H11-861_V4.0 Exam Dumps

Search for:

Exam Dumps

AACE International (1)
ACAMS (4)
ACE Fitness (1)
ACFCS (1)
ACFE (2)
Acquia (1)
ACSM (1)
ACT (1)
Adobe (19)
AEE (1)
AGA (1)
Alibaba Cloud (4)
Amazon (28)
American College of Rheumatology (1)
Android (1)
APA (1)
API (3)
APICS (3)
APMG-International (1)
Appian (1)
APSE (1)
ASIS (1)
ASQ (2)
ATLASSIAN (2)
Autodesk (1)
Avaya (10)
Aviatrix (1)
Axis (1)
BACB (1)
BCS (2)
BICSI (2)
Blockchain (1)
Blue Prism (3)
BOMI International (1)
CCE Global (2)
CertNexus (2)
CFA Institute (1)
CheckPoint (5)
CII (2)
CIMA (5)
CIPS (6)
Cisco (66)
CISI (1)
Citrix (5)
CIW (1)
Cloud Security Alliance (4)
CloudBees (1)
CMAA (1)
College Admission (1)
CompTIA (18)
Confluent (1)
CrowdStrike (3)
CWNP (2)
CyberArk (6)
DAMA (2)
Databricks (3)
Docker (1)
Dynatrace (1)
EC-COUNCIL (6)
ECCouncil (3)
EMC (22)
EnterpriseDB (1)
Ericsson (2)
Esri (1)
EXIN (3)
F5 (6)
FINRA (1)
Fortinet (20)
GAQM (2)
GED (1)
Genesys (4)
GIAC (4)
Google (15)
H3C (5)
HAAD (1)
HBX (1)
HDI (1)
HP (39)
HRCI (1)
Huawei (62)
IAPP (1)
IBM (19)
IIA (3)
IIBA (3)
Infor (2)
International Code Council (1)
ISACA (5)
ISC (6)
ISM (1)
ISQI (5)
ISTQB (7)
ITIL (2)
Juniper (19)
Linux Foundation (7)
Lpi (7)
Maryland Insurance Administration (1)
Medical Council of Canada (1)
Medical Professional (1)
Microsoft (77)
MongoDB (2)
MuleSoft (3)
NABP (3)
NACE (3)
NAHQ (3)
NCARB (1)
NCCER (1)
Netskope (1)
NetSuite (1)
Network Appliance (7)
NFPA (2)
NI (1)
NMLS (1)
Nokia (6)
Nutanix (12)
NVIDIA (1)
Ohio Department of Insurance (1)
OMSB (1)
Oracle (79)
OutSystems (1)
Palo Alto Networks (9)
PCI (2)
PDMA (1)
PECB (9)
Pegasystems (8)
Peoplecert (4)
PMI (7)
Postpartum Support International (1)
PRINCE2 (2)
PRMIA (2)
Pure Storage (1)
Python Institute (3)
Qlik (1)
RAPS (2)
Real Estate (1)
Real Estate Licensing (1)
RedHat (5)
SailPoint (2)
Salesforce (85)
SANS (1)
SAP (320)
SASInstitute (3)
Scaled Agile (1)
Scrum (4)
Scrum Alliance (1)
ServiceNow (7)
SHRM (1)
Sitecore (1)
Snowflake (6)
SolarWinds (1)
Splunk (14)
SUSE (1)
Symantec (1)
Tableau (2)
Test Prep (1)
The Open Group (6)
UiPath (1)
Uncategorized (20)
USGBC (2)
Veeam (3)
Veritas (1)
Vlocity (2)
VMware (21)
WGU (2)
Workday (2)
Zscaler (1)

[Q11-Q30] Real Exam Questions H12-351_V1.0 Dumps Exam Questions in here [Oct-2023]