[Q17-Q37] Use Real HPE6-A72 – 100% Cover Real Exam Questions [Mar-2022]

ExamBoosts March 10, 2022 HPE6-A72 > HP 0

Rate this post

Use Real HPE6-A72 – 100% Cover Real Exam Questions [Mar-2022]

Dumps Brief Outline Of The HPE6-A72 Exam – ExamBoosts

NEW QUESTION 17
What is the Link Layer Discovery Protocol?

a discovery protocol used between Layer 3 devices to determine routes within a single autonomous system

a standardized IPv6 neighbor discovery protocol used to replace the ARP and broadcast mechanism used in IPv4

a standardized protocol for communicating directly-connected device information and capabilities.

an Aruba proprietary discovery protocol supported in all Aruba switches along with Cisco Discovery Protocol or CDP

NEW QUESTION 18
Refer to the exhibit.

What change on Core-1 will result in a successful ping to 10.1.1.254 from the management interface?

Use the command ping 10.1.1.254 vrf mgmt

Use the command ping 10.1.1.254/24

Change the Core-1 management address to 10.1.1.1/25 first

The destination 10.1.1.254 requires configuring a static route

NEW QUESTION 19
Which two options are correct regarding the IEEE 802.11ax standard? (Choose two.)

allows transmissions of up to 4.8Gbps

is an emerging satellite connection standard to allow wireless access anywhere in the world

operates only in the 5GHz similar to 802.11ac

operates in both the 2.4GHz and 5GHz radios bands

is the first WLAN standard to no longer use electromagnetic signals to transmit data

NEW QUESTION 20
What is the login and password combination is used when first configuring an Aruba OS-CX switch from factory defaults?

NEW QUESTION 21
What is the correct description of a Multi-Layer Switch?

a switch with Layer 3 routing capabilities but lacks any Layer 1 features as a consequence

any switch that supports PoE, LLDP-MED and Flow Control

has all the functionality of a Layer 2 switch and most of the functionality of a Layer 3 router

multi-Layer refers specifically to using chassis switches with several line cards over stack port switches

NEW QUESTION 22
Refer to the exhibit.

The command show LLDP neighbor-info gets typed into Access-1. All switches are Aruba OS-CX switches. What is the output of this command?

Option A

Option B

Option C

Option D

NEW QUESTION 23
Which Ethernet port combination does the Aruba 5400R ZL2 switch series support?

10/100 Megabit Ethernet, Gigabit Ethernet, and 100 Gigabit Ethernet

Gigabit Ethernet, 25 Gigabit Ethernet, and 40 Gigabit Ethernet

10/100 Megabit Ethernet, Gigabit Ethernet, 25 Gigabit Ethernet, and 100 Gigabit Ethernet

10/100 Megabit Ethernet, Gigabit Ethernet, and 40 Gigabit Ethernet

NEW QUESTION 24
What is the binary conversion of the hexadecimal value 0x2001?

0010 0001

0002 0000 0000 0001

0011 0000 0000 0001

0010 0000 0000 0001

NEW QUESTION 25
Which command can be used to find the serial number of an Aruba OS-CX switch?

The command inventory

The command version

The command show running-configuration

The command show system

NEW QUESTION 26
Refer to the exhibit.

Using the static IP address configured above, what is the converted binary value of the third octet assigned to the local interface?

11010101

10110001

01001011

11111000

NEW QUESTION 27
Which port or ports should be allowed through a firewall so that an AOS-CX switch can act as an SNMP Agent?

UDP 1812 and UDP 1813

UDP 161

TCP 443

UDP 162

NEW QUESTION 28
Interface 1/1/1 is up
Admin state is up
Link transitions: 1
Description: TO_PC-1
Hardware: Ethernet, MAC Address: 00:11:22:33:44:55
MTU 1500
Type 1GbT
Full-duplex
qos trust none
Speed 1000 Mb/s
Auto-negotiation is on
Flow-control: off
Error-control: off
MDI mode: MDIX
VLAN Mode: access
Access VLAN: 1111
Which command will produce the above output?

show interface vlan 1111

show interface 1/1/1

show interface gigabit 1/1/1

show vlan 1111

NEW QUESTION 29
Which switch supports a maximum of 8 line-cards, 3 fabric modules, and 2 management cards?

Aruba 8400

Aruba 8408

Aruba 6410

Aruba 5412r

NEW QUESTION 30
Refer to the exhibit.

The above command was applied to an Aruba AOS-CX 6300M 24-port switch with 4-port SFP56 uplinks. All ports are set as access switchports.
Which ports carry VLAN 1 traffic?

1/1/8, 1/1/10, 1/1/5-1/1/24

1/1/1-1/1/28

1/1/1-1/1/24

1/1/8-1/1/10, 1/1/5-1/1/28

NEW QUESTION 31
Refer to the exhibit.

What VSF command produces the above output?

show vsf member

show vsf link

show vsf topology

show vsf detail

NEW QUESTION 32
Refer to the exhibit

What is true regarding VLAN 50 according to the diagram above?

VLAN 50 is part of a switched virtual interface (SVI) that was never routed causing it to be down.

Since VLAN 50 has not been assigned to any enabled physical port, the status is down.

VLAN 50 is assigned only to Trunk ports which is why no ports are listed under interfaces.

VLAN 50 was never added to the vlan-database and therefore is in a down state.

NEW QUESTION 33
Which statement is correct regarding powering an Aruba Access Point?

PoE or PoE+ is only used with Ethernet that is carried over multi-mode fiber cabling.

Using switchports for this reason is unnecessary, because Aruba Access Points typically use an AC to DC power adapter to draw power.

PoE or PoE+ enabled switchports are rarely used given concerns about causing electrical interference, with the data also carried over Ethernet cabling.

Most administrators use PoE or PoE+ enabled switchports to provide both Ethernet connectivity and power to the AP.

NEW QUESTION 34
Click on the colored box that corresponds with the line that best represents Unicast traffic flow.

NEW QUESTION 35
Refer to the exhibit.

Traffic is failing between Core-1 and Host-B. IP addressing has correctly been applied, and all interfaces are attached to the vrf GREEN.
Which configuration will correct the issue?