Fortinet NSE6_FWF-6.4 Exam Dumps – PDF Questions and Testing Engine [Q11-Q31]

Rate this post

Fortinet NSE6_FWF-6.4 Exam Dumps – PDF Questions and Testing Engine

Latest NSE6_FWF-6.4 Exam Dumps for Pass Guaranteed

NEW QUESTION 11
When configuring a wireless network for dynamic VLAN allocation, which three IETF attributes must be supplied by the radius server? (Choose three.)

81 Tunnel-Private-Group-ID

65 Tunnel-Medium-Type

83 Tunnel-Preference

58 Egress-VLAN-Name

64 Tunnel-Type

The RADIUS user attributes used for the VLAN ID assignment are:
IETF 64 (Tunnel Type)-Set this to VLAN.
IETF 65 (Tunnel Medium Type)-Set this to 802
IETF 81 (Tunnel Private Group ID)-Set this to VLAN ID.

NEW QUESTION 12
As a network administrator, you are responsible for managing an enterprise secure wireless LAN. The controller is based in the United States, and you have been asked to deploy a number of managed APs in a remote office in Germany.
What is the correct way to ensure that the RF channels and transmission power limits are appropriately configured for the remote APs?

Configure the APs individually by overriding the settings in Managed FortiAPs

Configure the controller for the correct country code for Germany

Clone a suitable FortiAP profile and change the county code settings on the profile

Create a new FortiAP profile and change the county code settings on the profile

NEW QUESTION 13
Refer to the exhibits.
Exhibit A

Exhibit B

The exhibits show the diagnose debug log of a station connection taken on the controller CLI.
Which security mode is used by the wireless connection?

WPA2 Enterprise

WPA3 Enterprise

WPA2 Personal and radius MAC filtering

Open, with radius MAC filtering

Best security option is WPA2-AES.

NEW QUESTION 14
Which statement is correct about security profiles on FortiAP devices?

Security profiles on FortiAP devices can use FortiGate subscription to inspect the traffic

Only bridge mode SSIDs can apply the security profiles

Disable DTLS on FortiAP

FortiGate performs inspection the wireless traffic

NEW QUESTION 15
Refer to the exhibits.
Exhibit A

Exhibit B

A wireless network has been created to support a group of users in a specific area of a building. The wireless network is configured but users are unable to connect to it. The exhibits show the relevant controller configuration for the APs and the wireless network.
Which two configuration changes will resolve the issue? (Choose two.)

For both interfaces in the wtp-profile, configure set vaps to be “Authors”

Disable intra-vap-privacy for the Authors vap-wireless network

For both interfaces in the wtp-profile, configure vap-all to be manual

Increase the transmission power of the AP radio interfaces

NEW QUESTION 16
You are investigating a wireless performance issue and you are trying to audit the neighboring APs in the PF environment. You review the Rogue APs widget on the GUI but it is empty, despite the known presence of other APs.
Which configuration change will allow neighboring APs to be successfully detected?

Enable Locate WiFi clients when not connected in the relevant AP profiles.

Enable Monitor channel utilization on the relevant AP profiles.

Ensure that all allowed channels are enabled for the AP radios.

Enable Radio resource provisioning on the relevant AP profiles.

The ARRP (Automatic Radio Resource Provisioning) profile improves upon DARRP (Distributed Automatic Radio Resource Provisioning) by allowing more factors to be considered to optimize channel selection among FortiAPs. DARRP uses the neighbor APs channels and signal strength collected from the background scan for channel selection.

NEW QUESTION 17
How are wireless clients assigned to a dynamic VLAN configured for hash mode?

Using the current number of wireless clients connected to the SSID and the number of IPs available in the least busy VLAN

Using the current number of wireless clients connected to the SSID and the number of clients allocated to each of the VLANs

Using the current number of wireless clients connected to the SSID and the number of VLANs available in the pool

Using the current number of wireless clients connected to the SSID and the group the FortiAP is a member of

VLAN from the VLAN pool based on a hash of the current number of SSID clients and the number of entries in the VLAN pool.

NEW QUESTION 18
Which two configurations are compatible for Wireless Single Sign-On (WSSO)? (Choose two.)

A VAP configured for captive portal authentication

A VAP configured for WPA2 or 3 Enterprise

A VAP configured to authenticate locally on FortiGate

A VAP configured to authenticate using a radius server

In the SSID choose WPA2-Enterprise authentication.
WSSO is RADIUS-based authentication that passes the user’s user group memberships to the FortiGate.

NEW QUESTION 19
When using FortiPresence as a captive portal, which two types of public authentication services can be used to access guest Wi-Fi? (Choose two.)

Social networks authentication

Software security token authentication

Short message service authentication

Hardware security token authentication

This information along with the social network authentication logins with Facebook, Google, Instagram, LinkedIn, or FortiPresence using your WiFi.
Captive Portal configurations for social media logins and internet access. You can add and manage sites using the integrated Google maps and manoeuvre your hardware infrastructure easily.

NEW QUESTION 20
As standard best practice, which configuration should be performed before configuring FortiAPs using a FortiGate wireless controller?

Create wireless LAN specific policies

Preauthorize APs

Create a custom AP profile

Set the wireless controller country setting

NEW QUESTION 21
Six APs are located in a remotely based branch office and are managed by a centrally hosted FortiGate. Multiple wireless users frequently connect and roam between the APs in the remote office.
The network they connect to, is secured with WPA2-PSK. As currently configured, the WAN connection between the branch office and the centrally hosted FortiGate is unreliable.
Which configuration would enable the most reliable wireless connectivity for the remote clients?

Configure a tunnel mode wireless network and enable split tunneling to the local network

Configure a bridge mode wireless network and enable the Local standalone configuration option

Configure a bridge mode wireless network and enable the Local authentication configuration option

Install supported FortiAP and configure a bridge mode wireless network

NEW QUESTION 22
A tunnel mode wireless network is configured on a FortiGate wireless controller.
Which task must be completed before the wireless network can be used?

The wireless network interface must be assigned a Layer 3 address

Security Fabric and HTTPS must be enabled on the wireless network interface

The wireless network to Internet firewall policy must be configured

The new network must be manually assigned to a FortiAP profile.

A FortiGate unit is an industry leading enterprise firewall. In addition to consolidating all the functions of a network firewall, IPS, anti-malware, VPN, WAN optimization, Web filtering, and application control in a single platform, FortiGate also has an integrated Wi-Fi controller.

Loading …

Reliable NSE 6 Network Security Specialist NSE6_FWF-6.4 Dumps PDF May 04, 2022 Recently Updated Questions: https://www.examboosts.com/Fortinet/NSE6_FWF-6.4-practice-exam-dumps.html