[Mar 01, 2023] 350-401 Ultimate Study Guide – ExamBoosts [Q101-Q118]

ExamBoosts March 1, 2023 350-401 > Cisco 0

Rate this post

[Mar 01, 2023] 350-401 Ultimate Study Guide – ExamBoosts

Ultimate Guide to Prepare 350-401 Certification Exam for CCNP Enterprise in 2023

Validity of 350-401 Exam

It is valid for 03 years. These three years start from the date of issue. An annually updated Version can be purchased.

If you failed in 350-401 Exam, don’t worry. Cleared in the previous exams, we guarantee you in the next exams. We will provide the dump with the updates. This is very important for the IT industry and many people do not know about it. Corrected candidates should apply to Pearson VUE for re-examination.

The vendor will contact the candidates for re-examination within two to four weeks. Update announcement will be released online. Luck and hard work. All the best for your future. If you are connected to hard duties and too much busy to take the exam. You will be happy to know that you can take the exam anytime in an annual; in Jan, Feb, Mar, Apr, Jun, Jul, Aug, Sep, or Oct. I suggest you take the exam in the morning; in a fresh mood.

Q101.

Refer to the exhibit Drag and drop the snippets into the RESTCONF request to form the request that returns this response Not all options are used

Q102. Drag and drop the Qos mechanisms from the left to the correct descriptions on the right

Q103. Refer to the exhibit.

On which interfaces should VRRP commands be applied to provide first hop redundancy to PC-01 and PC-02?

G0/0 and G0/1 on Core

G0/0 on Edge-01 and G0/0 on Edge-02

G0/1on Edge-01 and G0/1 on Edge-02

G0/0 and G0/1 on ASW-01

Q104. Refer to the exhibit.

An engineer is troubleshooting a connectivity issue and executes a traceoute. What does the result confirm?

The destination server reported it is too busy

The protocol is unreachable

The destination port is unreachable

The probe timed out

Q105. Witch two actions provide controlled Layer 2 network connectivity between virtual machines running on the same hypervisor? (Choose two.)

Use a single trunk link to an external Layer2 switch.

Use a virtual switch provided by the hypervisor.

Use a virtual switch running as a separate virtual machine.

Use a single routed link to an external router on stick.

Use VXLAN fabric after installing VXLAN tunneling drivers on the virtual machines.

Q106.

Refer to the exhibit. Communication between London and New York is down. Which command set must be applied to the NewYork switch to resolve the issue?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

Q107. Which statement explains why Type 1 hypervisor is considered more efficient than Type 2 hypervisor?

Type 1 hypervisor runs directly on the physical hardware of the host machine without relying on the underlying OS

Type 1 hypervisor enables other operating systems to run on it

Type 1 hypervisor relics on the existing OS of the host machine to access CPU, memory, storage, and network resources.

Type 1 hypervisor is the only type of hypervisor that supports hardware acceleration techniques

There are two types of hypervisors: type 1 and type 2 hypervisor.
In type 1 hypervisor (or native hypervisor), the hypervisor is installed directly on the physical server. Then instances of an operating system (OS) are installed on the hypervisor. Type 1 hypervisor has direct access to the hardware resources. Therefore they are more efficient than hosted architectures. Some examples of type 1 hypervisor are VMware vSphere/ESXi, Oracle VM Server, KVM and Microsoft Hyper-V.
In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an operating system and not the physical hardware directly. A big advantage of Type 2 hypervisors is that management console software is not required.

Q108. What does this EEM applet event accomplish?
“event snmp oid 1.3.6.1.3.7.1.5.1.2.4.2.9 get-type next entry-op g entry-val 75 poll-interval 5”

It issues email when the value is greater than 75% for five polling cycles.

It reads an SNMP variable, and when the value exceeds 75% for live polling cycles.

It presents a SNMP variable that can be interrogated.

Upon the value reaching 75%, a SNMP event is generated and sent to the trap server.

Explanation
EEM offers the ability to monitor events and take informational or corrective action when the monitored events occur or reach a threshold. An EEM policy is an entity that defines an event and the actions to be taken when that event occurs. There are two types of EEM policies: an applet or a script. An applet is a simple form of policy that is defined within the CLI configuration.
To specify the event criteria for an Embedded Event Manager (EEM) applet that is run by sampling Simple Network Management Protocol (SNMP) object identifier values, use the event snmp command in applet configuration mode.
event snmp oid oid-value get-type {exact | next} entry-op operator entry-val entryvalue
[exit-comb {or | and}] [exit-op operator] [exit-val exit-value] [exit-time exit-timevalue] poll-interval poll-int-value
+ oid: Specifies the SNMP object identifier (object ID)
+ get-type: Specifies the type of SNMP get operation to be applied to the object ID specified by the oid-value argument.
– next – Retrieves the object ID that is the alphanumeric successor to the object ID specified by the oid-value argument.
+ entry-op: Compares the contents of the current object ID with the entry value using the specified operator. If there is a match, an event is triggered and event monitoring is disabled until the exit criteria are met.
+ entry-val: Specifies the value with which the contents of the current object ID are compared to decide if an SNMP event should be raised.
+ exit-op: Compares the contents of the current object ID with the exit value using the specified operator. If there is a match, an event is triggered and event monitoring is reenabled.
+ poll-interval: Specifies the time interval between consecutive polls (in seconds) Reference: https://www.cisco.com/en/US/docs/ios/12_3t/12_3t4/feature/guide/gtioseem.html

Q109. Drag and drop the descriptions of the VSS technology from the left to the right. Not all options are used.

Q110. Drag and drop the threat defense solutions from the left onto their descriptions on the right.

Explanation

Q111. Refer the exhibit.

Which router is the designated router on the segment 192.168.0.0/24?

This segment has no designated router because it is a nonbroadcast network type.

This segment has no designated router because it is a p2p network type.

Router Chicago because it has a lower router ID

Router NewYork because it has a higher router ID

Q112. An engineer must configure HSRP group 300 on a Cisco IOS router. When the router is functional, it must be the must be the active HSRP router. The peer router has been configured using the default priority value. Which command set is required?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

Q113. Drag and drop the descriptions from the left onto the routing protocol they describe on the right.

Q114. Which three elements determine Air Time efficiency? (Choose three)

evert-driven RRM

data rate (modulation density) or QAM

channel bandwidth

number of spatial streams and spatial reuse

RF group leader

dynamic channel assignment

https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2020/pdf/BRKEWN-3010.pdf

Q115. Refer to the exhibit.

An engineer must modify the access control list EGRESS to allow all IP traffic from subnet 10.1.10.0/24 to
10.1.2.0/24. The access control list is applied in the outbound direction on router interface GigabitEthemet 0/1.
Which configuration commands can the engineer use to allow this traffic without disrupting existing traffic flows?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

Q116. Refer to the exhibit.

Based on the configuration in this WLAN security setting, Which method can a client use to authenticate to the network?

text string

username and password

certificate

RADIUS token

Q117. A customer requests a network design that supports these requirements:
* FHRP redundancy
* multivendor router environment
* IPv4 and IPv6 hosts
Which protocol does the design include?

GLBP

VRRP version 2

VRRP version 3

HSRP version 2

Q118.

Company policy restricts VLAN 10 to be allowed only on SW1 and SW2. All other VLANs can be on all three switches. An administrator has noticed that VLAN 10 has propagated to SW3. Which configuration corrects the issue?
A)

B)

C)

D)