Pass Your Next H13-611_V4.5-ENU Certification Exam Easily & Hassle Free [Q68-Q89]

Rate this post

Pass Your Next H13-611_V4.5-ENU Certification Exam Easily & Hassle Free

Free Huawei H13-611_V4.5-ENU Exam Question Practice Exams

Huawei H13-611_V4.5-ENU (HCIA-Storage V4.5) certification exam is designed for individuals who want to validate their knowledge and skills in the storage field. H13-611_V4.5-ENU exam focuses on the fundamental concepts of storage, including storage system architecture, storage networking technologies, backup and disaster recovery, and storage system management. Passing H13-611_V4.5-ENU exam will demonstrate your ability to design, deploy, and manage storage solutions based on Huawei storage products.

QUESTION 68
SCSI communication is initiated by the initiator and received and processed by the target. When the host and the storage device communicate, the storage device The side assumes the role of initiator.

TRUE

FALSE

QUESTION 69
Which of the following descriptions about Huawei RAID 2.0+ technology is correct? (Multiple choice)

The hard disk types of each storage layer in the hard disk domain are the same

The hard disk space is divided into fixed-size blocks

The user can set the “RAID strategy” for each storage tier in the storage pool.

Grain is the smallest granularity of data migration and the basic unit that constitutes Thin LUN

QUESTION 70
Which of the following methods are included in data center data backup? (Multiple Choice)

Smart Migration

Smart Clone

LUN snapshot

LUN replication

QUESTION 71
Which of the sequence of the overall reconstruction process is correct?
1. Query all CKG with CK falling on the faulty disk
2. Allocate hot spare CK to all these CKG
3. Update the CKG information to release the reconstructed CK
4. Write the reconstructed data to the hot standby CK
5. Through the RAID algorithm,
Calculate the data on the failed disk based on the data on the normal disk and the check disk

1->2->5->4->3

1->2->3->5->4

5->1->2->3->4

5->2->1->4->3

QUESTION 72
Multipath software can only be used in IP-SAN.

TRUE

FALSE

Analysis: It is also needed in the dual control of the low-end SAN/NAS converged storage architecture; FC SAN is also required.

QUESTION 73
Which of the following statements correctly describe the improvements of SAS technology compared to SCSI? Select All that Apply.

Lower cost than SCSI

Full duplex transmission of data.

Half duplex transmission of data

Higher throughput.

SAS technology offers full duplex transmission of data and higher throughput than SCSI, which makes it more cost-effective and efficient. SAS technology does not offer half duplex transmission of data.

QUESTION 74
Which of the following descriptions of NAS is correct?
Description 1: NAS is always based on file sharing.
Description 2: The distance of the network connection affects the performance of the NAS.

Both description 1 and description 2 are correct.

Description 1 is correct, description 2 is wrong

Description 1 is wrong, description 2 is correct

Both description 1 and description 2 are wrong

QUESTION 75
HUAWEI OceanStor SmartTier can be used to position files to be on specific disk drive types.

TRUE

FALSE

QUESTION 76
Which of the following description about NAS is wrong? (Multiple choice)

NAS devices can use cluster technology for failover

NAS provides a console centralized management, which can effectively manage the file system

Do not allow NAS to be accessed by multiple clients at the same time

A client cannot connect to multiple NAS devices at the same time

QUESTION 77
The Smart Cache feature in Huawei OceanStor V3 series products can only improve read performance, not write performance.

True

False

QUESTION 78
As the new storage administrator, you are tasked with the procurement of a new batch of SSD drives to replace the older drives that has reached the end of life. You have the option of SLC, MLC and TLC SSD. Which of the following will be your choice with a limited budget and medium level of reliability concerns? (Select All that Apply)

Purchasing all SLC SSD drives for maximum savings on cost regardless of reliability.

Purchasing all TLC SSD drives for the storage system for the best reliability and performance.

Purchasing the MLC SSD if within budget range for core applications and services for better performance and reliability.

Purchasing SLC SSD drives that has lowest cost and reliability for storage purposes of non critical applications

When choosing between different types of SSDs, the main factor to consider is the trade-off between cost and reliability. SLC (Single-Level Cell) SSDs are the most reliable and have the longest lifespan, but they are also the most expensive. TLC (Triple-Level Cell) SSDs are less reliable than SLC SSDs, but they are also less expensive. MLC (Multi-Level Cell) SSDs are a good balance between cost and reliability, they are more affordable than SLC SSDs and more reliable than TLC SSDs.

QUESTION 79
The storage architectures listed below, which are scalable? (Multiple choice)

DAS

NAS

FC SAN

IPS AN

QUESTION 80
Application program interface (API) is a set of routines, protocols, and tools for building software applications.

TRUE

FALSE

QUESTION 81
A hospital needs to archive a large number of patient cases and examination results generated every day, but storage resources are limited. Under the premise of not occupying transmission bandwidth, which deduplication method is the best to choose?

Source deduplication

Target deduplication

Online deduplication

Post-processing deduplication

QUESTION 82
You are tasked to setup a SAN storage system that has the following requirements: (1) To minimize the workload on server resources. (2) Optimize the capabilities on storage system for deduplication. Select the following options that fits the scenario above.
(Multiple Choice)

Use NIC instead of HBA cards to minimize the host resource consumption during I/O operations.

Offload the storage processing tasks to the server to optimize the data deduplication.

Usage of TCP/IP offload engine technology to do processing on HBA cards on the server to minimize the usage of server resources.

Adding hardware acceleration module to the storage system to optimize the performance of data deduplication.

QUESTION 83
The HyperSnap functionality can be used to improve or optimize a company’s backup strategy.

TRUE

FALSE

QUESTION 84
The process of regenerating all user data and parity data on the failed disk in the mirror array or RAID array is called:

Recalculation

Refactoring

Hot backup

Recovery

QUESTION 85
Each organization independently determines which data should be stored and for how long.

TRUE

FALSE

QUESTION 86
What are the correct compression features of Huawei? (Multiple Choice)

Write to disk first, read first and then compress in idle time

Online compression before writing to disk

Online compression after writing to disk

When the system time is idle, read and write first and then compress

QUESTION 87
The SCSI protocol can be used not only for communication between the host and the disk, but also for communication between the host and the physical tape library, optical disc, and so on.

TRUE

FALSE

QUESTION 88
Which of the following descriptions about the technical characteristics of pre-copy are correct? (Multiple Choice)

Reduce the occurrence of refactoring.

Improve RAID reliability.

Pre-copy needs to suspend RAID group business access in advance.

When the number of errors of the suspicious failed disk exceeds the preset threshold, immediately migrate and copy the data on the suspicious failed disk and import it to the hot spare disk.

QUESTION 89
What kind of technology does the OceanStor 5300 V3 expansion controller belong to?

Scale-out

Scale-up

Scale-in

Scale-deep

Loading …