[Oct-2024] Practice EMC D-RP-OE-A-24 exam. Online Exam Practice Tests with detailed explanations! Pass D-RP-OE-A-24 with confidence! [Q33-Q50]

ExamBoosts October 14, 2024 D-RP-OE-A-24 > EMC 0

4/5 - (1 vote)

Practice Data Protection D-RP-OE-A-24 exam. Online Exam Practice Tests with detailed explanations! Pass D-RP-OE-A-24 with confidence!

D-RP-OE-A-24 – Dell RecoverPoint Operate Achievement Practice Tests 2024 | ExamBoosts

QUESTION 33
A database team is performing tests against a PIT copy of data. Their write activity is going to exceed the currently allocated amount of space dedicated to Image Access mode.
What should be done to allow testing to continue without disruption to their testing?

Navigate to Protection > Manage Protection > Select the CG from the list and select the copy.
Click Edit Journal, and add one or more additional Journal volumes.

Use the config_copy_group= copy= policy image_access_log_size= CLI command

Expand the Journal volume using native array tools.
Navigate to Protection > Manage Protection > Select the CG from the list and select the copy.
Click Edit Journal, and then select “Expand Journal”.

Navigate to Protection > Manage Protection > Select the CG from the list and select the copy.
Click Edit, and then increase the reserved image access percentage from 20%

When the database team’s write activity is expected to exceed the space allocated for Image Access mode in RecoverPoint, additional Journal volumes need to be added to accommodate the increased write activity. This can be done through the Unisphere for RecoverPoint interface:
* Navigate to Protection: Access the Protection menu in the Unisphere for RecoverPoint.
* Manage Protection: Go to the Manage Protection section.
* Select the Consistency Group (CG): Choose the appropriate CG from the list.
* Select the Copy: Click on the copy that is being used for the Point-in-Time (PIT) testing.
* Edit Journal: Click on the Edit Journal option.
* Add Journal Volumes: Add one or more additional Journal volumes to ensure there is enough space for the write activity during the testing periD.
By adding additional Journal volumes, the database team can continue their testing without disruption due to space limitations in the Image Access mode1.

QUESTION 34
When attempting to protect new XtremlO LUNs, the administrator is unable to add an XtremIO source LUN to the Consistency Group. What is a possible reason for this issue?

XtremlO array was not licensed in RecoverPoint

RecoverPoint/EX only allows the protection of VNX arrays

XtremlO arrays are only protected with RecoverPoint for VMs

XtremIO LUN was created with a 512-byte block size

One possible reason for the inability to add an XtremIO source LUN to the Consistency Group in RecoverPoint could be that the XtremIO array was not licensed in RecoverPoint. Licensing is a critical step in enabling the features and functionalities of RecoverPoint for specific storagearrays.If the XtremIO array is not licensed, RecoverPoint would not recognize or allow the addition of its LUNs to a Consistency Group1.
Additionally, it’s important to ensure that the RecoverPoint version supports the XtremIO array model.For instance, RecoverPoint does not support XtremIO X2 arrays until version 5.11. Therefore, if the RecoverPoint version is earlier than 5.1, it would not be able to replicate volumes from an XtremIO X2 array, which could manifest as an issue when trying to add LUNs to a Consistency Group.
For the most accurate and up-to-date information, it is always best to consult the latest official Dell RecoverPoint documentation or contact Dell EMC support directly.

QUESTION 35
If a VPLEX distributed device is selected during the RecoverPoint Consistency Group Creation wizard, which option will appear?

Section to define production and replica Journals on unregistered storage arrays

Radio button to select which cluster will be the winning cluster upon the initialization of the Consistency Group

List of LUNs which are less than 10 TBs in size; the size limit for distributed devices

Ability to create a MetroPoint Consistency Group

When a VPLEX distributed device is selected during the RecoverPoint Consistency Group Creation wizard, the option to create a MetroPoint Consistency Group becomes available. This is because MetroPoint is a feature that leverages VPLEX distributed devices for enhanced data protection and disaster recovery capabilities. The steps involved in this process typically include:
* Selecting the VPLEX distributed device: During the creation of a Consistency Group, you choose the VPLEX distributed device as the source of replication.
* MetroPoint option appears: Once a VPLEX distributed device is selected, the wizard presents the option to create a MetroPoint Consistency Group.
* Configuring the MetroPoint Consistency Group: If you choose to create a MetroPoint Consistency Group, you will then configure the necessary settings, such as replication mode and RPO (Recovery Point Objective).
* Finalizing the setup: After configuring the settings, you finalize the creation of the Consistency Group, which now has the enhanced capabilities provided by the MetroPoint feature1.
MetroPoint Consistency Groups are designed to provide continuous data protection and availability across multiple sites, combining the benefits of VPLEX Metro with the third-site replication provided by RecoverPoint1.

QUESTION 36
A company is using XtremlO for their RecoverPoint environment. They have approximately 100 GB of cumulative changes per day with the change being constant throughout the day. The company has a requirement to roll back 48 hours.
How should the Journals be sized and how should the copy policy be configured to ensure maximum protection with the least amount of storage used?

5 GB with the “Required Protection Window” set for 2 days

200 GB with the “Required Protection Window” set for Default

10 GB with the “Required Protection Window” set for 2 days

40 GB with the “Required Protection Window” set for 2 days

* Calculate Daily Changes: With 100 GB of cumulative changes per day, the total amount of changes over two days would be 200 GB.
* Determine Journal Size: The Journal size must be large enough to store all the changes for the required rollback periD.Therefore, a Journal size of 200 GB is necessary.
* Set Protection Window: The “Required Protection Window” should be set for 2 days to match the rollback requirement.
* Configure Copy Policy: The copy policy should be configured to ensure that the Journal maintains the point-in-time images for at least 48 hours.
By following these steps, the company can ensure maximum protection with the least amount of storage used, while also meeting their rollback requirements1234.

QUESTION 37
In order to balance the workload of a RecoverPoint system, an administrator decided to change the primary RPA for specific Consistency Groups. Where is this setting configured?

Link Policy tab for the Consistency Groups

Copy Policy tab for the production copy

Group Policy tab for the Consistency Groups

Copy Policy tab for the remote copy

The setting to change the primary RecoverPoint Appliance (RPA) for specific Consistency Groups is configured under the Group Policy tab for the Consistency Groups.This tab allows administrators to manage and adjust policies that affect the entire Consistency Group, including the assignment of the primary RPA, which is responsible for managing the replication for the group1.
The process for changing the primary RPA typically involves:
* Accessing the Unisphere for RecoverPoint interface.
* Navigating to the Consistency Groups section.
* Selecting the specific Consistency Group to be modified.
* Going to the Group Policy tab.
* Adjusting the settings to designate a new primary RPA for the group.
This change can help balance the workload across the RPAs in the RecoverPoint system, ensuring that no single RPA becomes a performance bottleneck and that the replication process remains efficient and effective1.

QUESTION 38
What is the minimum size of a Journal when using Distributed Consistency Groups?

80 GB

40 GB

10 GB

20 GB

For Distributed Consistency Groups in a Dell RecoverPoint environment, the minimum size required for each journal volume is 40 GB.This is the minimum per copy, which can be a single LUN or multiple LUNs that add up to at least 40 GB1.
The size of the journal is determined by the write change rate of what is being replicated and the protection window required per Consistency Group. A general rule of thumb is about 15-20% of the total amount of data being replicated.For example, if a Distributed Consistency Group (DCG) has production server LUNs totaling
500 GB, then the journal per copy would be about 100 GB following this rule1.
It’s important to note that while 40 GB is the minimum, the actual size may need to be larger depending on the specific requirements and write change rate of the environment.The journal size should be sufficient to handle the data changes and provide the necessary protection window1.

QUESTION 39
A physical RecoverPoint cluster is connected to a single VMAX array. When running SAN diagnostics from the boxmgmt menu, what is the minimum number of WWPN that can be seen in the storage ports section of the diagnostic test?

* RecoverPoint and VMAX Connectivity:
* A physical RecoverPoint cluster connected to a VMAX array uses Fibre Channel connections for
* communication. Each RPA typically has two Fibre Channel ports.
* WWPN (World Wide Port Name):
* WWPNs are unique identifiers assigned to each port in a Fibre Channel network, including both RecoverPoint and VMAX ports.
* Minimum Number of WWPNs:
* For a single RecoverPoint appliance (RPA), the minimum number of ports includes:
* 2 RecoverPoint Ports (RP Ports): Each RPA usually has at least two Fibre Channel ports for redundancy.
* 1 Front-End Adapter (FA) Port: The VMAX array has at least one FA port connected to the RecoverPoint system.
* Diagnostic Tests:
* When running SAN diagnostics from theboxmgmtmenu, the test will show the WWPNs of all connected ports, including both the RPA ports and the VMAX FA ports.

QUESTION 40
A RecoverPoint administrator is failing over a Consistency Group including two non-production copies. What will be the replication state between the new production and former production when the administrator selects “Set Copy as Production”?

Replication is paused between the new production and former production

A short initialization is started between the new production and former production

A volume sweep is started between the new production and former production

A full sweep is started between the new production and former production

Questions no:What will be the replication state between the new production and former production when the administrator selects “Set Copy as Production”?
Verified answer:When “Set Copy as Production” is selected, the failover replica copy is confirmed as the new Production and initiates replication to additional replicas other than the original Production copy which is already receiving writes after the failover1. This means that the replication state between the new production and former production would involve initiating replication to the additional replicas.
Step by Step Comprehensive Detailed Explanation with References:
* Failover Occurs: The administrator initiates a failover, which involves switching the roles of the production and non-production copies.
* Set Copy as Production: The administrator selects the “Set Copy as Production” option, which confirms the failover replica copy as the new Production.
* Replication Initiated: Replication is initiated to additional replicas, excluding the original Production copy, which continues to receive writes after the failover.
* State of Former Production: The former production copy, now a replica, will be in a state where it is receiving the replicated data from the new production copy.
This process ensures that the data protection and replication continue seamlessly after the failover, with the new production copy taking over the role of the source for replication1.

QUESTION 41
Which type of RecoverPoint Consistency Group contains both active and standby production copies?

Any group with multiple remote copies

XtremIO Consistency Groups

Distributed Consistency Groups

MetroPoint Consistency Group

A MetroPoint Consistency Group is a special type of Consistency Group in Dell RecoverPoint that is designed for environments where high availability and disaster recovery are critical. It includes:
* Active Production Copies: These are the primary copies that are actively used in the production environment.
* Standby Production Copies: These copies are on standby and can be activated in case the active production copies fail or need to be taken offline for maintenance.
The MetroPoint Consistency Group allows for continuous data protection and availability across multiple sites, combining the benefits of VPLEX Metro with the third-site replication provided by RecoverPoint1.

QUESTION 42
A RecoverPoint administrator wants to use the compression setting to save bandwidth in their environment.
What will be the impact of changing the link compression setting on aConsistency Group?

Temporary high-load

Journal history will be lost

Long resynchronization

Changing the link compression setting on a RecoverPoint Consistency Group can result in a temporary high-load on the system. This is because when compression is enabled or settings are changed, the system needs to compress the existing data before it can be transmitted, which requires additional processing power and can temporarily increase the load on the RecoverPoint Appliances (RPAs).
The process involves:
* The administrator changes the link compression setting in the Consistency Group configuration.
* The RPAs begin compressing the data that needs to be replicated across the network.
* This compression process increases the CPU and memory usage on the RPAs, leading to a temporary high-load situation.
* Once the initial compression is completed, the system load returns to normal levels, and replication continues with the new compression setting in effect.
It’s important to note that while the system is under high-load, there might be a temporary impact on performance, but this does not affect the integrity of the replication or the Journal history.The system is designed to handle such temporary increases in load without losing any critical data1.

QUESTION 43
A storage administrator has one production site and one remote site. The administrator configured the RecoverPoint with VNX(SE) cluster at both sites. The current environment has two Consistency Groups configured with two copies each; one production copy and one remote copy.
Based on the company’s growing business requirements, the
administrator has been asked to keep a local copy of the production data.
Which action should occur in order to meet this requirement?

RecoverPoint with VNX(SE) does not support more than two copies in a single Consistency Group

Delete and reconfigure the existing Consistency Group for a local and remote replication

Add a copy into the existing Consistency Group for a local replication

Upgrade the RecoverPoint with VNX(SE) license to RecoverPoint/EX and then reconfigure the Consistency Group

To meet the requirement of keeping a local copy of the production data in a RecoverPoint environment with VNX(SE) clusters, the administrator can add a local copy into the existing Consistency Group. This action does not require deleting and reconfiguring the existing Consistency Group or upgrading the license. Here are the steps:
* Access Unisphere for RecoverPoint: Log into the Unisphere interface for RecoverPoint management.
* Navigate to the Consistency Group: Find the Consistency Group that needs the local copy.
* Add a Local Copy: Use the option to add a copy into the selected Consistency Group.
* Configure the Local Copy: Specify the settings for the local copy, such as the Journal volume and RPO settings.
* Apply Changes: Save the changes to implement the local replication.
This process allows the administrator to enhance the data protection strategy by adding a local copy for operational recovery or other business needs without disrupting the existing remote replication setup1.

QUESTION 44
In Unisphere for RecoverPoint, which wizard will allow an administrator to manage and monitor all currently accessed copies undergoing testing, failover, and production recovery?

Protect Volumes

Manage Protection

Manage Recovery

Test a Copy

In Unisphere for RecoverPoint, the “Manage Recovery” wizard is the tool that allows administrators to manage and monitor all currently accessed copies that are undergoing testing, failover, and production recovery. This wizard provides a centralized interface for overseeing the recovery operations and ensuring that they are proceeding as expected. It includes features to:
* View the status of recovery operations.
* Manage failover and failback processes.
* Monitor the progress of data synchronization and access during testing1.
This wizard is an essential part of the RecoverPoint management suite, providing administrators with the capabilities needed to ensure the continuity and integrity of their data protection processes1.

QUESTION 45
A RecoverPoint administrator is adding a new user to the system using Unisphere. Which pre-defined user is used to add a new user?

admin

boxmgmt

security-admin

security

Only users with security permissions can add users, remove and edit permissions for users that have previously been added.–RecoverPoint Management Student Resource Guide

QUESTION 46
A RecoverPoint system has been deployed with XtremlO at production and disaster recovery sites. What is an accurate statement, if the replication mode for a Consistency Group has been set as “Continuous”?

Set customized time between cycles

Set minimum time between cycles

Effective RPO will be 0 seconds

Effective RPO can be < 60 seconds

In a Dell RecoverPoint system with XtremIO arrays at both production and disaster recovery sites, setting the replication mode for a Consistency Group as “Continuous” implies that the replication occurs continuously without predefined intervals. This mode aims to minimize the Recovery Point Objective (RPO), which is the maximum targeted period in which data might be lost due to a major incident. While an RPO of 0 seconds is ideal, it is often not practical due to network latency and system processing times.Therefore, an effective RPO of less than 60 seconds is a realistic target for a
“Continuous” replication mode, ensuring that data loss is minimized to the lowest possible timeframe in the event of a disaster1.

QUESTION 47
A storage administrator wants to protect their distributed VPLEX volumes using the RecoverPoint, MetroPoint feature. The administrator wants to know if they need to be aware of any special considerations. What information should be provided to the administrator?

RecoverPoint does not support replication of distributed VPLEX devices

Both VPLEX clusters must have a RecoverPoint cluster connected in order to create a MetroPoint Consistency Group

Set the RecoverPoint Group Policy to enable group writes across RPAs

AIl VPLEX devices at both sites can be protected using MetroPoint, regardless of whether they are local or distributed

When using the MetroPoint feature of RecoverPoint to protect distributed VPLEX volumes, it is essential that both VPLEX clusters have a connected RecoverPoint cluster.This is necessary to create a MetroPoint Consistency Group, which is a configuration that allows for continuous data protection and availability across multiple sites1.
The MetroPoint solution provides a three-site configuration that combines VPLEX Metro (which operates within distances of 5-10ms round-trip time, application dependent) with a third site provided by a RecoverPoint appliance.This setup ensures that data is continuously available and protected, and it allows for failover between two Metro sites without impacting protection1.
It’s important to note that while MetroPoint enables protection for VPLEX devices at both sites, the requirement for both VPLEX clusters to be connected to a RecoverPoint cluster is crucial for the creation and proper functioning of a MetroPoint Consistency Group1.
For the most accurate and up-to-date information, it is always best to consult the latest official Dell RecoverPoint documentation or contact Dell EMC support directly2.

QUESTION 48
What occurs when Journal volumes are masked to hosts in a RecoverPoint environment?

RecoverPoint GUI and CLI logs an event confirming the masking has occurred

Splitter is attached to the newly exposed Journal volumes

Journals become available for use in the “Consistency Group” wizard

Hosts are able to write to the Journal volumes but will lead to Journal corruption

In a Dell RecoverPoint environment, Journal volumes are critical components used to track and manage point-in-time images for data replication and recovery. If Journal volumes are mistakenly masked to hosts, the following occurs:
* Hosts Gain Access: The hosts that are zoned/masked to the Journal volumes gain the ability to write to these volumes.
* Potential for Corruption: Any write access by hosts to the Journal volumes can lead to corruption of the Journal. This is because Journals are meant to be managed exclusively by RecoverPoint and should not be directly accessed or modified by hosts.
* Impact on Replication: Journal corruption can disrupt the RecoverPoint replication process, potentially leading to data loss or an inability to recover to specific points in time.
* Resolution: To prevent such issues, it is crucial to ensure that Journal volumes are not exposed to hosts and are only accessed by RecoverPoint Appliances (RPAs) for replication purposes12.
It is important to follow best practices for zoning and masking in a storage environment to avoid such critical configuration errors12.

QUESTION 49
A RecoverPoint administrator performs a Consistency Group failover to a remote copy. What happens to the point-in-time images stored in the copy Journal after the copy becomes production?

Images are consolidated

Images are replicated to the new copy Journal

Images are deleted

Images are replicated to the new production Journal

When a Consistency Group failover is performed to a remote copy in a Dell RecoverPoint system, the point-in-time images stored in the copy Journal are deleted after the copy becomes the new production.This is because the copy Journal’s role is to maintain a record of changes for recovery purposes, and once the copy is promoted to production, its Journal is reset to start recording new changes from that point forward1.
The process involves the following steps:
* Failover Initiated: The administrator initiates a failover to the remote copy.
* Copy Becomes Production: The remote copy is promoted to the production role.
* Journal Reset: The point-in-time images in the copy Journal are deleted as part of the promotion process.
* New Production Journal: A new production Journal is started to record changes from the new production copy moving forward.
This ensures that the RecoverPoint system can continue to protect the data with a fresh start for the new production environment1.

QUESTION 50
Which tools are listed under “System Analysis and Tools” section of Unisphere for RecoverPoint?

Detect Bottlenecks, Balance Load, Collect System Information

Detect Bottlenecks, Balance Load, Configure System Reports and Alerts

Users and Security, Configure System Reports and Alerts, Change Security Level

Users and Security, Configure System Reports and Alerts, Collect System Information

Under the “System Analysis and Tools” section of Unisphere for RecoverPoint, the tools listed are designed to assist administrators in analyzing and optimizing the RecoverPoint system. The tools include:
* Detect Bottlenecks: This tool helps identify any performance bottlenecks within the RecoverPoint system. It analyzes the flow of replication data and points out areas where there might be congestion or delays, allowing administrators to take corrective actions.
* Balance Load: The Balance Load tool is used to evenly distribute the workload across the RecoverPoint Appliances (RPAs) to prevent any single RPA from becoming a performance bottleneck. This ensures that the system operates efficiently and that replication tasks are completed in a timely manner.
* Collect System Information: This tool gathers comprehensive information about the RecoverPoint system’s configuration and operation. It is useful for troubleshooting issues, performing system audits, and preparing for support calls or maintenance activities.
These tools are integral to maintaining the health and performance of the RecoverPoint environment and are accessible through the Unisphere for RecoverPoint interface1.

Loading …