[Sep 09, 2026] New 2026 Fortinet NSE5_SSE_AD-7.6 Exam Dumps with PDF from ExamBoosts (Updated 52 Questions) [Q28-Q52]

ExamBoosts September 9, 2026 Uncategorized 0

4/5 - (1 vote)

New 2026 NSE5_SSE_AD-7.6 exam questions Welcome to download the newest ExamBoosts NSE5_SSE_AD-7.6 PDF dumps (52 Q&As)

P.S. Free 2026 Fortinet Network Security Expert NSE5_SSE_AD-7.6 dumps are available on Google Drive shared by ExamBoosts

QUESTION 28
An existing Fortinet SD-WAN customer who has recently deployed FortiSASE wants to have a comprehensive view of, and combined reports for, both SD-WAN branches and remote users. How can the customer achieve this?

Forward the logs from FortiSASE to Fortinet SOCaaS.

Forward the logs from FortiGate to FortiSASE.

Forward the logs from FortiSASE to the external FortiAnalyzer.

Forward the logs from the external SD-WAN FortiAnalyzer to FortiSASE.

QUESTION 29
Which two delivery methods are used for installing FortiClient on a user’s laptop? (Choose two.)

Use zero-touch installation through a third-party application store.

Download the installer directly from the FortiSASE portal.

Send an invitation email to selected users containing links to FortiClient installers.

Configure automatic installation through an API to the user’s laptop.

QUESTION 30
Which two methods are available for provisioning FortiClient on endpoints using FortiSASE?
(Choose two.)

FortiClient can be provisioned only by distributing installers to end users through the FortiSASE portal without an invitation code.

FortiClient can be provisioned by distributing the installer to end users for manual installation.

FortiClient can be provisioned using installers with an invitation code from the FortiSASE portal, SCCM or GPO, or mobile device management (MDM) software.

FortiClient provisioning is limited to using mobile device management MDM software or manual installation without requiring an invitation code.

FortiClient can be provisioned using SCCM or GPO, but only through an external portal, not the FortiSASE portal.

QUESTION 31
Refer to the exhibit. An SD-WAN zone configuration on the FortiGate GUI is shown.
What can you conclude about the zone and member configuration on this device?

You can move HUB1-VPN3 from the HUB1 zone to the virtual-wan-link zone.

The overlay-factories zone contains no member.

You can delete the virtual-wan-link zones.

You can delete the overlay-factories zone.

QUESTION 32
Which statement about security posture tags in FortiSASE is correct?

Multiple tags can be assigned to an endpoint, but only one is used for evaluation.

Multiple tags can be assigned to an endpoint and used for evaluation.

Tags are static and do not change with endpoint status.

Only one tag can be assigned to an endpoint.

QUESTION 33
Which statement about FortiSASE CASB capabilities is true?

FortiSASE provides both API-based CASB and inline CASB.

FortiSASE provides only API-based CASB.

FortiSASE provides only inline CASB.

FortiSASE provides CASB capabilities only through Security Fabric integration.

QUESTION 34
Which statement is true about FortiSASE supported deployment?

FortiSASE relies on ZTNA-only mode, which replaces SWG and endpoint functions.

FortiSASE supports both Endpoint mode and SWG mode, depending on deployment.

FortiSASE supports VPN mode and Agentless mode, based on user requirements.

FortiSASE operates only in SWG mode, where all traffic is forced through FortiSASE POPs.

QUESTION 35
Which secure internet access (SIA) use case minimizes individual endpoint configuration? (Choose one answer)

Agentless remote user internet access

SIA for FortiClient agent remote users

Site-based remote user internet access

SIA using ZTNA

QUESTION 36
Refer to the exhibit.

You configure SD-WAN on a standalone FortiGate device. You want to create an SD-WAN rule that steers traffic related to Facebook and LinkedIn through the less costly internet link. What must you do to set Facebook and LinkedIn applications as destinations from the GUI?

Install a license to allow applications as destinations of SD-WAN rules.

In the Internet service field, select Facebook and LinkedIn.

You cannot configure applications as destinations of an SD-WAN rule on a standalone FortiGate device.

Enable the visibility of the applications field as destinations of the SD-WAN rule.

According to theSD-WAN 7.6 Core Administratorcurriculum and theFortiOS 7.6 Administration Guide, setting common web-based services like Facebook and LinkedIn as destinations in an SD-WAN rule is primarily accomplished through theInternet Service Database (ISDB).
* Internet Service vs. Application Control: In FortiOS, there is a distinction betweenInternet Services (which use a database of known IP addresses and ports to identify traffic at the first packet) and Applications(which require the IPS engine to inspect deeper into the packet flow to identify Layer 7 signatures).
* SD-WAN Efficiency: Fortinet recommends using theInternet service fieldfor services like Facebook and LinkedIn in SD-WAN rules because it allows the FortiGate to steer the traffic immediately upon the first packet. If the “Application” signatures were used instead, the first session might be misrouted because the application is not identified until after the initial handshake.
* GUI Configuration: As shown in the exhibit (image_b3a4c2.png), the “Destination” section of an SD- WAN rule includes anInternet servicefield by default. To steer Facebook and LinkedIn traffic, the administrator simply clicks the “+” icon in that field and selects the entries for Facebook and LinkedIn from the database.
* Feature Visibility (Alternative): While youcanenable a specific “Application” field inSystem > Feature Visibility(by enabling “Application Detection Based SD-WAN”), this is typically used for less common applications that do not have dedicated ISDB entries. For the specific “applications” mentioned (Facebook and LinkedIn), they are natively available in theInternet servicefield, making Option B the most direct and common implementation.
Why other options are incorrect:
* Option A: Licensing for application signatures is part of the standard FortiGuard services and is not a prerequisite specific only to “applications as destinations” in SD-WAN rules.
* Option C: Standalone FortiGate devices fully support application-based and ISDB-based steering in SD-WAN rules.
* Option D: While enabling feature visibility would add anadditionalfield for L7 applications, it is not a
“must” for Facebook and LinkedIn, which are already accessible via the Internet Service field provided in the default GUI layout.

QUESTION 37
Refer to the exhibits.

Two SD-WAN event logs, the member status, the SD-WAN rule configuration, and the health-check configuration for a FortiGate device are shown. Immediately after the log messages are displayed, how will the FortiGate steer the traffic based on the information shown in the exhibits? (Choose one answer)

FortiGate uses port1 or port2 to steer the traffic for SD-WAN rule ID 1.

FortiGate uses port1 to steer the traffic for SD-WAN rule ID 1.

FortiGate uses port2 to steer the traffic for SD-WAN rule ID 1.

FortiGate skips SD-WAN rule ID 1.

QUESTION 38
Refer to the exhibit. How does FortiGate handle the traffic with the source IP 10.0.1.130 and the destination IP 128.66.0.125?

FortiGate steers the traffic flow through port2.

FortiGate routes the traffic flow according to the FIB.

FortiGate load balances the traffic flow through port1 and port2.

FortiGate drops the traffic flow.

QUESTION 39
Refer to the exhibit. You configure SD-WAN on a standalone FortiGate device. You want to create an SD-WAN rule that steers traffic related to Facebook and LinkedIn through the less costly internet link.
What must you do to set Facebook and LinkedIn applications as destinations from the GUI?

Enable the visibility of the applications field as destinations of the SD-WAN rule.

You cannot configure applications as destinations of an SD-WAN rule on a standalone FortiGate device.

Install a license to allow applications as destinations of SD-WAN rules.

In the Internet service field select Facebook and LinkedIn.

QUESTION 40
Refer to the exhibit. Which web filter category will be denied access and display a replacement message to the user?

Discrimination

Drug Abuse

Hacking

Illegal or Unethical

QUESTION 41
Refer to the exhibit.

The SD-WAN rule status and configuration is shown. Based on the exhibit, which change in the measured latency will first make HUB1-VPN3 the new preferred member?

When HUB1-VPN3 has a latency of 80 ms

When HUB1-VPN3 has a lower latency than HUB1-VPN1 and HUB1-VPN2

When HUB1-VPN1 has a latency of 200 ms

When HUB1-VPN3 has a latency of 90 ms

QUESTION 42
In which order does a FortiGate device consider the following elements shown in the left column during the route lookup process?
Select the element in the left column, hold and drag it to a blank position in the column on the right. Place the four correct elements in order, placing the first element in the first position at the top of the column. Once you place an element, you can move it again if you want to change your answer before moving to the next question. You need to drop four elements in the work area.
Select and drag the screen divider to change the viewable area of the source and work areas.

QUESTION 43
An administrator is configuring SD-WAN to load balance their network traffic. Which two things should they consider when setting up SD-WAN? (Choose two.)

When applicable, FortiGate load balances traffic through all members that meet the SLA target.

SD-WAN load balancing is possible only when using the manual and the best quality strategies.

Only the manual and lowest cost (SLA) strategies allow SD-WAN load balancing.

You can select the outbandwidth hash mode with all strategies that allow load balancing.

QUESTION 44
Which two statements correctly describe what happens when traffic matches the implicit SD-WAN rule?
(Choose two answers)

Traffic is load balanced using the algorithm set for the v4-ecmp-mode setting.

Traffic does not match any of the entries in the policy route table.

FortiGate flags the session with may_dirty and vwl_default.

The traffic is distributed, regardless of weight, through all available static routes.

The session information output displays no SD-WAN service id.

According to theSD-WAN 7.6 Core Administratorstudy guide andFortiOS 7.6 Administration Guide, the
“implicit rule” is the default rule at the bottom of the SD-WAN rule list (ID 0). It is only evaluated if traffic does not match any manually configured SD-WAN rules.
* Policy Route Table Context (Option B): SD-WAN rules are technically a specialized form of policy- based routing. For a packet to match theimplicit rule, it must first pass through the routing hierarchy. If traffic matches the implicit rule, it indicates that it did not match any higher-priority user-defined SD- WAN rules or any specific entries in the manualpolicy route tablethat would have intercepted the traffic earlier.
* Session Information (Option E): When you use the CLI to inspect an active session (e.g., diagnose sys session list), the output contains a field for theSD-WAN Service ID. If traffic is steered by a user- defined rule, it displays the ID of that rule (e.g., service_id=1). However, when traffic falls through to theimplicit rule, the session information displaysno SD-WAN service ID(it often shows as 0 or is omitted), because the implicit rule does not function as a “service” in the same way user-defined rules do.
* Routing Behavior: The implicit rule follows the standard routing table (RIB/FIB) logic. It uses the priorityanddistanceof the static routes to determine the path. If multiple paths have the same distance and priority, it uses the algorithm set by v4-ecmp-mode, but this is a function of the routing engine, not the SD-WAN engine itself.
Why other options are incorrect:
* Option A: While v4-ecmp-mode (e.g., source-ip-based) is used for ECMP routing, this is part of the general FortiOS routing behavior for equal-cost paths in the FIB, whereas the implicit rule simply
“hands over” the decision to that routing table.
* Option C: When traffic matches the implicit rule, the session is actually flagged with vwl_id=0 and potentially dirty if a route change occurs, but vwl_default is not the standard flag name used in this specific context in the curriculum.
* Option D: This is incorrect because the implicit ruledoes respect weight, distance, and priorityas defined in the static routes within the routing table; it does not distribute traffic “regardless” of these values.

QUESTION 45
Which three FortiSASE use cases are possible? (Choose three answers)

Secure SaaS Access (SSA)

Secure Private Access (SPA)

Secure Internet Access (SIA)

Secure Browser Access (SBA)

Secure VPN Access (SVA)

QUESTION 46
Refer to the exhibits. Two SD-WAN event logs, the member status, the SD-WAN rule configuration, and the health-check configuration for a FortiGate device are shown.
Immediately after the log messages are displayed, how will the FortiGate steer the traffic based on the information shown in the exhibits? (Choose one answer)

FortiGate uses port1 or port2 to steer the traffic for SD-WAN rule ID 1.

FortiGate uses port1 to steer the traffic for SD-WAN rule ID 1.

FortiGate uses port2 to steer the traffic for SD-WAN rule ID 1.

FortiGate skips SD-WAN rule ID 1.

QUESTION 47
Refer to the exhibit, which shows the SD-WAN rule status and configuration.

Based on the exhibit, which change in the measured packet loss will make HUB1-VPN3 the new preferred member? (Choose one answer)

When all three members have the same packet loss

When HUB1-VPN1 has 4% packet loss

When HUB1-VPN1 has 12% packet loss

When HUB1-VPN3 has 4% packet loss

According to theSD-WAN 7.6 Core Administratorstudy guide and theFortiOS 7.6 Administration Guide, the selection process for theBest Quality (priority)strategy depends on two primary factors: the measured link quality metric and the configured member priority order.
Based on the provided exhibit (image_b40dfc.png), we can determine the following:
* Strategy and Metric: The rule is in Mode(priority) (Best Quality) using link-cost-factor(packet loss).
* Strict Comparison: The link-cost-threshold is set to0. This means there is no “advantage” given to the current preferred link; the FortiGate performs a strict comparison where the link with the objectively best metric is chosen.
* Tie-Breaker Logic: When multiple links have thesamepacket loss, the FortiGate uses theMember Priority Orderdefined in the rule (set priority-members 6 4 5) as the tie-breaker.
* Member 6 (HUB1-VPN3)is the highest priority.
* Member 4 (HUB1-VPN1)is the second priority.
* Member 5 (HUB1-VPN2)is the lowest priority.
* Current State: HUB1-VPN1 is currently selected because its packet loss (2.000%) is lower than HUB1-VPN2 (4.000%) and HUB1-VPN3 (12.000%). Even though HUB1-VPN3 has a higher configuration priority, its significantly higher packet loss prevents it from being chosen.
Evaluation of Options:
* Option A (Verified): If all three members have thesame packet loss(e.g., they all show 2%), the quality metrics are equal. The SD-WAN engine then refers to the priority-members list. Since HUB1- VPN3 (Seq 6) is the first member in that list, it will immediately become the new preferred member.
* Option B: If HUB1-VPN1 reaches 4%, it matches HUB1-VPN2 (4%). HUB1-VPN3 remains at 12%.
The system will choose between VPN1 and VPN2. Since VPN1 (Seq 4) is higher in the priority list than VPN2 (Seq 5), HUB1-VPN1 stays preferred.
* Option C: If HUB1-VPN1 reaches 12%, it matches HUB1-VPN3. However, HUB1-VPN2 is still better at4.000%. Therefore, HUB1-VPN2 would become the new preferred member, not HUB1-VPN3.
* Option D: If HUB1-VPN3 drops to 4%, it matches HUB1-VPN2. However, HUB1-VPN1 is still the best link at2.000%, so it remains selected.

QUESTION 48
Drag and Drop
In which order does a FortiGate device consider the following elements shown in the left column during the route lookup process?

QUESTION 49
Which configuration is a valid use case for FortiSASE features in supporting remote users?

Enabling secure SaaS access through SD-WAN integration, protecting against web-based threats with data loss prevention, and monitoring user connectivity with shadow IT visibility.

Monitoring SaaS application performance, isolating browser sessions for all websites, and integrating with SD-WAN for data loss prevention.

Enabling secure web browsing to protect against threats, providing explicit application access with zero- trust or SD-WAN integration, and addressing shadow IT visibility with data loss prevention.

Providing secure web browsing through remote browser isolation, addressing shadow IT with zero-trust access, and protecting data at rest only.

QUESTION 50
Refer to the exhibit.

Which two statements about the Vulnerability summary dashboard in FortiSASE are correct? (Choose two.)

The dashboard shows the vulnerability score for unknown applications.

Vulnerability scan is disabled in the endpoint profile.

The dashboard allows the administrator to drill down and view CVE data and severity classifications.

Automatic vulnerability patching can be enabled for supported applications.

QUESTION 51
Which statement about security posture tags in FortiSASE is correct?

Only one tag can be assigned to an endpoint.

Tags are static and do not change with endpoint status.

Multiple tags can be assigned to an endpoint and used for evaluation.

Multiple tags can be assigned to an endpoint, but only one is used for evaluation.

QUESTION 52
How does the FortiSASE security dashboard facilitate vulnerability management for FortiClient endpoints?
(Choose one answer)

It automatically patches all vulnerabilities without user intervention and does not categorize vulnerabilities by severity.

It shows vulnerabilities only for applications and requires endpoint users to manually check for affected endpoints.

It displays only critical vulnerabilities, requires manual patching for all endpoints, and does not allow viewing of affected endpoints.

It provides a vulnerability summary, identifies affected endpoints, and supports automatic patching for eligible vulnerabilities.

NSE5_SSE_AD-7.6 exam questions from ExamBoosts dumps: https://www.examboosts.com/Fortinet/NSE5_SSE_AD-7.6-practice-exam-dumps.html (52 Q&As)

new NSE5_SSE_AD-7.6 test dumps free NSE5_SSE_AD-7.6 100% accuracy NSE5_SSE_AD-7.6 dumps cost NSE5_SSE_AD-7.6 latest study guide book NSE5_SSE_AD-7.6 latest test camp NSE5_SSE_AD-7.6 reliable braindumps free NSE5_SSE_AD-7.6 reliable test cram NSE5_SSE_AD-7.6 valid test questions pdf

[Sep 09, 2026] New 2026 Fortinet NSE5_SSE_AD-7.6 Exam Dumps with PDF from ExamBoosts (Updated 52 Questions) [Q28-Q52]

[Sep 09, 2026] New 2026 Fortinet NSE5_SSE_AD-7.6 Exam Dumps with PDF from ExamBoosts (Updated 52 Questions) [Q28-Q52]

Leave a Reply Cancel reply

Recent Posts

Recent Comments

Archives

Exam Dumps