Passer l'examen Juniper JN0-103 rapidement avec ExamBoosts [Q37-Q58]

Pass Juniper JN0-103 Exam Quickly With ExamBoosts

Prepare JN0-103 Question Answers – JN0-103 Exam Dumps

For more info visit:

Juniper JN0-103 Exam Reference

NO.37 Referring to the exhibit,
***Exhibit is Missing***
Which statement is correct when traffic is received from 10.10.10.4?

 The traffic is counted and accepted

 The traffic is counted and rejected

 The traffic is only rejected

 The traffic is only accepted

NO.38 What are two examples of transit traffic? (Choose two.)

 SFTP traffic that enter one interface and is destine for another interface on the local router.

 SCP traffic that enters one interface and exit another interface on the local router.

 SFTP traffic that enters and exits the same interface on the local router.

 SCP traffic that is destined for the router’s loopback interface.

NO.39 Referring to the Exhibit,
***Exhibit is Missing***
Which command produced the output shown in the exhibit?

 Show interfaces summary

 Show interfaces filters

 Show interfaces extensive

 Show interfaces terse

NO.40 Referring to the exhibit,

Which next-hop interface will be used to reach the 10.21.14.16 destination?

 ge-0/0/1.0

 ge-0/0/0.0

 ge-0/0/3.0

 ge-0/0/2.0

NO.41

Referring to the exhibit, which parameter at the end of the command would provide information for troubleshooting purposes?

 no-timestamp

 extensive

 print-ascii

 no-resolve

NO.42 Which command displays the output shown in the exhibit?

 show chassis temperature-thresholds

 show chassis environment

 show chassis hardware

 show chassis alarms

NO.43 Which two conditions must exist in a Junos device for traffic to transit the device to a specific destination? Choose Two

 A forwarding table entry for that destination must exist

 A routing policy must be in place on the device

 A firewall filter must exist to allow traffic to reach that destination

 A routing table entry for that destination must exist

NO.44 While working on a Junos device, you receive the message shown in the exhibit.
In this scenario, what should you do to stop the shutdown process?
In this scenario, what should you do to stop the shutdown process?

 Issue the request system halt in 0 command

 Issue the request system power-off in 0 command

 Issue the clear system reboot command

 Issue the clear system commit command

https://www.juniper.net/documentation/en_US/junos/topics/reference/command-summary/clear-system-reboot.html

NO.45 Exhibit:

Quelle est l'affirmation la plus vraie ?

 Traps are allowed from 10.21.15.180

 Traps are sent to 10.21.15.180

 Traps are sent to 10.21.15.16

 Traps are allowed from 10.21.15.16

NO.46 What is the purpose of the load mergecommand?

 to look for a replace tag in the configuration you load

 to combine the current configuration with the configuration you load

 to add or delete variables from the configuration based on the contents of a specified patch file

 to completely overwrite the current configuration with the configuration you load

NO.47 What are two benefits realized by the disaggregated Junos? (Choose two.)

 The platform drivers and forwarding engineer are removed from the control plane to increase performance.

 The architecture facilitates programmability through provisioning the control plane, the data path, and the platform API’s.

 There is increased flexibility to use different control plane versions.

 The Junos VM becomes hardware-independent and can be deployed on any hypervisor without modification.

NO.48 What are three functions of the RE? (Choose three.)

 to maintain the forwarding tables

 to enforce stateless firewall filters

 to manage the PFE

 to monitor the chassis

 to implement policing

NO.49 When a system process encounters an error, how does the Junos OS protect the other processes from being impacted?

 The Junos OS executes only one process at a time.

 Each routing protocol runs as an individual process.

 Each process operates in its own shared memory space.

 The Junos OS executes multiple processes simultaneously.

NO.50 Referring to the exhibit,

what happens when ping packets are sent to management interface address of the local router?

 The ping packets are silently discarded

 An ICMP unreachable message is returned

 The Ping packets are accepted

 An ICMP redirect message is returned

NO.51 What are two benefits realized by the disaggregated Junos? (Choose two.)

 There is increased flexibility to use different control plane versions.

 The Junos VM becomes hardware-independent and can be deployed on any hypervisor without modification.

 The architecture facilitates programmability through provisioning the control plane, the data path, and the platform APIs.

 The platform drivers and forwarding engine are removed from the control plane to increase performance.

NO.52

Referring to the exhibit, which statement is true?

 Traps are sent to 10.21.15.180.

 Traps are allowed from 10.21.15.180.

 Traps are sent to 10.21.15.16.

 Traps are allowed from 10.21.15.16.

NO.53 What does the output of the show route forwarding-table command display?

 The routing protocol databases in the Routing Engine

 The inactive entries in the Routing Engine’s routing table

 The Routing Engine’s forwarding table

 The Packet Forwarding Engine routing table

NO.54 What is the default route preference for OSPF internal?

 100

 150

 5

 10

NO.55 Which two features are implemented on the Packet Forwarding Engine? (Choose two.)

 firewall filters

 chassis management

 class of service

 routing protocol updates

NO.56 Referring to the exhibit,

which command will cause this event message?

 request system logout

 request system commit

 request system recover

 request system halt

NO.57 Refer to Exhibit:

Which parameter at the end of the command would provide information for troubleshooting pusposes?

 No-timestamp

 Extensive

 Print-ascii

 No-resolve

NO.58 Cliquez sur le bouton Exposer.

Referring to the exhibit, which two statements are correct? (Choose two.)

 The memory utilization is 28%

 The memory utilization is 72%

 The CPU kernel utilization is 1%

 The 15 minute CPU load average is 99%

 Chargement …

Study Guides for JN0-103 Validation

These are the books for your use during JN0-103 exam revision:

• Juniper Junos JN0-103 Real Exam Preparation

  This study book for the JN0-103 test has been done by Sure Help and brings helpful practice materials to candidates who need them. The questions in the practice tests have been developed to reflect the actual exam, which means when you carry out your practice using them, you will get to know what the final validation might be coming with. With this manual, you access a dependable way to check how much content you have grasped and whether it is the right one for the official test.

• Learning Junos OS from Zero to Learner

  This revision guide by Jawaid Iqbal starts with the fundamental concepts of Junos OS that include CLI structure as well as configuration and not forgetting troubleshooting. Also included are basics concerning products for Juniper. Those who study with such a book will get hold of knowledge on how to configure, verify, and troubleshoot one’s network in a procedural manner. The core aspect of the guide is in its ability to help a learner pass through the steps that are involved when configuring a typical OS for Junos.

• Day 1: Exploring the Junos CLI

  A study guide like this for JN0-103 exam was written by Walter Goralski. It’s a popular guide for beginners who are just getting introduced to devices that run on Junos OS. By the way, the book can as well be used to refresh your knowledge concerning Junos OS when you are thinking about upgrading your skills. Some of the issues tackled by such a guide include navigating the operational mode for CLI as well as its configuration mode, modifying, saving, and loading arranging files while minimizing risk & concerning operations, using rudimentary commands for configuration, and utilizing the safety features available on the commit model for Junos OS.

• Day 1: Beginner’s Guide to Learning Junos

  This is a free study guide written by Martin Brown & others that you can easily download from a link on the Juniper Networks official page. It is written by a team of eight authors and covers the basics involved in Junos OS. It immerses itself into topics such as the Junos fundamentals, user interface, configuration basics involved in Junos, routing fundamentals, routing policies, filters for firewalls, and others. Such a book basically offers you a systematic way of working with Juniper networks and performing configuration as well as troubleshooting of the Junos OS and within a day, you will have captured what you need.

• Junos OS for Dummies

  This JN0-103 test prep guide is presented in a way that makes it easy for a beginner to grasp the basics of Junos OS. The book’s authors include Walter J. Goralski, Cathy Gadecki, and Michael Bushong. It first explores the basics associated with Junos and takes you through the features related to it to ensure that you quickly pick and retain the knowledge of setting up, operating, and adding its key services. It further goes into tips that can help in rendering the network of your company to be more effective while revealing important cautions. Other things captured by such a book include the process of configuring default security characteristics for Junos, and a breakdown of advanced concepts to make it simple for you to grasp them gradually.

Real Juniper JN0-103 Exam Questions [Updated 2022]: https://www.examboosts.com/Juniper/JN0-103-practice-exam-dumps.html

         

Related Links: myportal.utt.edu.tt www.stes.tyc.edu.tw myportal.utt.edu.tt www.stes.tyc.edu.tw myportal.utt.edu.tt www.stes.tyc.edu.tw