H35-460 Dumps Remise spéciale pour une durée limitée Essai GRATUIT [Q36-Q55]

Q36. When using multimode fiber to connect BBU and AAU, the distance should not exceed how many meters?

Q37. Which of the following boards supports software reset?

Q38. During the 5G test, if the PC is directly connected to the LAN port of Huawei CPE through the network cable, the IP address must be manually configured on the PC to be normal

Q39. 5G RAN 2.0 version gNodeB logical cells and sector devices use the command ANDD NRDUCELLTRP to complete the binding.

Q40. AAU/RRU and BBU fronthaul fiber is less than 100 meters, mostly used in CRAN centralized site solutions.

Q41. What configuration modules does the gNodeB wireless data configuration include? (Multiple choice)

Q42. Which of the following are new RNTI types in NR? (Multiple choice)

Q43. Regarding the NR physical layer processing, which of the following description is wrong?

Q44. Under the EN-DC architecture, the eNodeB/gNodeB only supports the configuration of the X2 finger based on the EndPoint method.

Q45. What data configuration tools can gNodeB use to complete the site opening?

Q46. The baseband device BascbandEQM of gNodeB is optionally added.

Q47. The VLNA group mode of gNodeB can tag different traffic with VLAN tags based on service type.

Q48. 100Mhz, 64T64 cell recommended to configure how much eCPRI connection bandwidth?

Q49. When the maximum power consumption of the RF cross block is < 800W, which of the following power supply scheme is the most suitable?

Q50. Which MML command is used to add tracking area information to gNodeB?

Q51. The MCC and MNC information added by the gNodeB in the SA architecture is consistent with the core network PLMN information.

Q52. After the 5G network UE is powered on and enters the idle state, what operations will be performed in the Attach process? (Multiple Choice)

Q53. The transmission data in the initial data configuration of the gNodeB has a strong coupling relationship with the wireless data.

Q54. Which of the following 5C network evolution paths has the lowest deployment cost?

Q55. gNodeB must configure the transmission data then can configuring the wireless data.