Updated Apr 04, 2026 Certification Exam NCP-US-6.10 Dumps – Practice Test Questions [Q52-Q75]

Q52. Which two options show the correct minimum configurations when deploying Nutanix File servers? (Choose two.)

The number of CVMs must be equal to or greater than the number of file server VMs (FSVMs).

A minimum of eight vCPUs per FSVM.

The minimum number of FSVMs is three.

A minimum of 12 GiB of memory per FSVM.

When deploying Nutanix File servers, the correct minimum configurations include:
* The minimum number of FSVMs is three(Option C).
* A minimum of 12 GiB of memory per FSVM(Option D).
Nutanix Files is a scale-out file storage solution that uses File Server Virtual Machines (FSVMs) to provide file services via SMB and NFS protocols. The minimum configuration ensures high availability, performance, and scalability.
According to theNutanix Unified Storage Administration (NUSA)course, “Nutanix Files requires a minimum of three FSVMs to ensure high availability and load balancing across the file server.” This minimum of three FSVMs allows Nutanix Files to distribute file share operations and provide failover capabilities in case of FSVM or node failures.
The course also specifies that “each FSVM requires a minimum of 12 GiB of memory to handle file server operations effectively.” This memory allocation supports the processing needs of file services, including protocol handling, caching, and management tasks.
TheNutanix Certified Professional – Unified Storage (NCP-US)study guide elaborates that “Nutanix Files deployment requires at least three FSVMs, each configured with a minimum of 12 GiB of memory and four vCPUs, to meet the baseline requirements for production environments.” While the guide mentions four vCPUs as the minimum, the options provided in the question include eight vCPUs, which is not the minimum but a possible configuration for higher workloads.
Les autres options sont incorrectes :
* The number of CVMs must be equal to or greater than the number of FSVMs: There is no strict requirement that the number of Controller VMs (CVMs) must match or exceed the number of FSVMs.
CVMs manage the Nutanix cluster’s storage and services, and their count depends on the cluster size, not the number of FSVMs.
* A minimum of eight vCPUs per FSVM: The minimum requirement is four vCPUs per FSVM, as specified in Nutanix documentation. Eight vCPUs may be used for larger deployments but is not the minimum.
The NUSA course documentation confirms that “a Nutanix Files deployment must include at least three FSVMs with 12 GiB of memory each to ensure a robust and highly available file storage solution.” References:
Nutanix Unified Storage Administration (NUSA) Course, Section on Nutanix Files: “Deployment requirements and minimum configurations for FSVMs.” Nutanix Certified Professional – Unified Storage (NCP-US) Study Guide, Topic 1: Deploy and Upgrade Nutanix Unified Storage, Subtopic: “Nutanix Files deployment and FSVM sizing.” Nutanix Documentation (https://www.nutanix.com), Nutanix Files Administration Guide: “Minimum configuration for Nutanix Files deployment.”

Q53. What should the administrator do to satisfy the configuration requirements?

Configure Lifecycle rules with enabled tiering for AWS S3 and Objects instance.

Configure Lifecycle rule with enabled tiering for AWS S3 and replication for Objects instance.

Configure Lifecycle rule with enabled replication for AWS S3 and tiering for Objects instance.

Configure Lifecycle rules with enabled replication for AWS S3 and Objects instance.

To satisfy the configuration requirements for managing data lifecycle in Nutanix Unified Storage, the administrator shouldconfigure Lifecycle rules with enabled tiering for AWS S3 and Objects instance.
Nutanix Data Lens, which integrates with Nutanix Objects and supports tiering to cloud storage like AWS S3, allows administrators to define lifecycle rules to automatically tier data to cost-effective storage based on access patterns or age.
TheNutanix Unified Storage Administration (NUSA)course explains that “Nutanix Data Lens enables lifecycle management through tiering policies that move data from Nutanix Objects to cloud storage, such as AWS S3, to optimize storage costs.” Lifecycle rules in Data Lens can be configured to tier infrequently accessed data to AWS S3, which supports tiering to storage classes like S3 Standard-Infrequent Access or S3 Glacier.
TheNutanix Certified Professional – Unified Storage (NCP-US)study guide states that “lifecycle rules in Nutanix Data Lens are used to configure tiering for Nutanix Objects, allowing data to be moved to AWS S3 for long-term storage or archival.” This applies to both Nutanix Objects and AWS S3, as Data Lens supports tiering policies for both environments to ensure efficient data placement.
Les autres options sont incorrectes :
* Configure Lifecycle rule with enabled tiering for AWS S3 and replication for Objects instance:
Replication is not a primary function of lifecycle rules in Nutanix Data Lens for Nutanix Objects.
Replication is typically handled by other mechanisms, such as Smart DR or bucket replication, not lifecycle rules.
* Configure Lifecycle rule with enabled replication for AWS S3 and tiering for Objects instance:
Lifecycle rules in Data Lens focus on tiering, not replication, for Nutanix Objects. AWS S3 replication is a separate feature that is not managed through Data Lens.
* Configure Lifecycle rules with enabled replication for AWS S3 and Objects instance: Lifecycle rules in Data Lens do not support replication for either AWS S3 or Nutanix Objects; they are designed for tiering.
The NUSA course documentation notes that “Nutanix Data Lens lifecycle rules enable tiering to AWS S3 and other cloud storage, ensuring data is stored cost-effectively while remaining accessible, making tiering the primary mechanism for lifecycle management.” References:
Nutanix Unified Storage Administration (NUSA) Course, Section on Nutanix Data Lens: “Configuring lifecycle rules for data tiering.” Nutanix Certified Professional – Unified Storage (NCP-US) Study Guide, Topic 2: Configure and Utilize Nutanix Unified Storage, Subtopic: “Data lifecycle management and tiering with Nutanix Data Lens.” Nutanix Documentation (https://www.nutanix.com), Nutanix Data Lens Guide: “Lifecycle rules for tiering to AWS S3.”

Q54. Question:
An administrator has been advised to access the Nutanix Files Server VM and ensure that passwords meet the organization’s security policy for server access.
Which password complexity requirement does Nutanix Files support?

At least 2 lowercase letters

At least 8 characters difference

At least 8 characters long

At least 2 uppercase letters

Q55. An administrator has a primary Nutanix Files instance running on an ESXi-based Nutanix cluster. An identical Files instance has been configured at a secondary site for disaster recovery purposes with less than
5ms latency between sites.
Management has asked that the primary Files instance be configured in such a way that provides a zero RPO.
Which File Server option needs to be enabled to support the request?

Metro Protection Policy

Metro Protection Domain

vSphere Cluster Services

vSphere Cluster Availability

Q56. An administrator is tasked with upgrading Objects Manager to the latest release that came out earlier in the week. The administrator has navigated to the LCM page in Prism Central and does not see the latest version of Objects Manager as an available upgrade. What is the likely reason the administrator does not see the current release of Objects Manager as an available upgrade?

An LCM inventory has not been performed

The administrator is logged in as local admin rather than a domain admin

The administrator needs to perform the upgrade through Prism Element

Prism Central needs to be scaled out

The administrator is attempting to upgrade Objects Manager (a component of Nutanix Objects) using Prism Central’s Lifecycle Manager (LCM) but does not see the latest version, which was released earlier in the week (prior to June 05, 2025). The most likely reason is thatan LCM inventory has not been performed. LCM requires an inventory operation to check for available updates by querying Nutanix’s external repositories or a dark site server (if configured), and without this step, the latest version of Objects Manager will not appear in the LCM page.
TheNutanix Unified Storage Administration (NUSA)course states, “Before upgrading components like Objects Manager via LCM, an inventory must be performed in Prism Central to retrieve the latest available versions from Nutanix repositories.” The inventory process updates the LCM catalog with the latest software versions, including Objects Manager, ensuring that the administrator can see and select the new release for upgrade. If the inventory has not been run recently, LCM will only show versions that were available during the last inventory, which may not include the latest release from earlier in the week.
TheNutanix Certified Professional – Unified Storage (NCP-US)study guide further elaborates that “a common reason for missing the latest component versions in LCM is the failure to perform an inventory; administrators must run an LCM inventory to ensure the latest versions, such as new releases of Objects Manager, are available for upgrade.” Since the latest version was released recently, an inventory is necessary to refresh the LCM catalog.
Les autres options sont incorrectes :
* The administrator is logged in as local admin rather than a domain admin: The issue is not related to the type of admin account (local vs. domain). Both local and domain admins can perform LCM inventories and upgrades if they have the necessary permissions, and there is no indication of a permission error.
* The administrator needs to perform the upgrade through Prism Element: LCM upgrades for Nutanix Objects components, including Objects Manager, are performed through Prism Central, not Prism Element, as Prism Central provides centralized management for such operations.
* Prism Central needs to be scaled out: Scaling out Prism Central (e.g., adding more VMs) is not required to see available upgrades in LCM. The issue is related to the inventory process, not Prism Central’s scale.
The NUSA course documentation emphasizes that “running an LCM inventory is a critical step to ensure the latest versions of components like Objects Manager are visible in Prism Central for upgrades, especially for recent releases.” References:
Nutanix Unified Storage Administration (NUSA) Course, Section on Lifecycle Management: “Performing LCM inventory for component upgrades.” Nutanix Certified Professional – Unified Storage (NCP-US) Study Guide, Topic 1: Deploy and Upgrade Nutanix Unified Storage, Subtopic: “LCM inventory process for Nutanix Objects upgrades.” Nutanix Documentation (https://www.nutanix.com), LCM Administration Guide: “Running inventory to check for available upgrades.”

Q57. An administrator has a Nutanix Files deployment hosted on an AHV-based Nutanix cluster, scaled out to four FSVMs hosting several department shares. In the event of a ransomware attack, files need to be quickly recovered from a self-hosted snapshot.
How can this be accomplished?

Configure an Async DR Protection Domain.

Install NGT and enable self-service restore.

Configure a DR Availability Zone.

Use File Analytics to enable self-service restore.

Q58. Question:
An administrator plans to create astriped volumein a VM using guest-OS tools that will be backed by a volume-group.
What configuration must be present for the VM to utilizemultiple CVMs to service IO requests?

The VM must have a virtual RAID controller capable of RAID level 0.

iSCSI MPIO must be configured in the guest OS.

The volume-group must have flash mode enabled.

The volume-group must have more than one vDisk configured.

Q59. Question:

An administrator has received a complaint from a user that a Windows VM lost access to an iSCSI Volume Group (VG) during a maintenance window of an ESXi-based Nutanix cluster. The VM’s iSCSI configuration shows it is connecting to a specific IP (172.20.100.104).
What recommended change should the administrator make to resolve this disruption?

Change the Discovery IP to match the configured VIP.

Remove Discovery IP and configure with DSIP.

Add all missing CVM IPs in Discovery tab.

Select the Enable multi-path checkbox.

Q60. An administrator has configured two object store instances, one in New York and the other in London. Both object stores are managed by their own Prism Central instances running compatible versions. Availability zone pairing and IAM replication has been configured between Prism Central instances; the implementation requires a common namespace. Which action should the administrator take next?

Create a Federated Namespace

Create a File System Namespace

Create a Global Namespace

Create a Kubernetes Namespace

To meet the requirement of acommon namespacefor two Nutanix Objects instances located in New York and London, managed by separate Prism Central instances with availability zone pairing and IAM replication, the administrator shouldcreate a Global Namespace. A global namespace in Nutanix Objects allows multiple object store instances to share a unified namespace, enabling consistent access to buckets and objects across geographically distributed sites using a single naming convention.
TheNutanix Unified Storage Administration (NUSA)course explains that “Nutanix Objects supports a global namespace to provide a unified view of buckets across multiple object store instances, which is critical for distributed environments requiring consistent data access.” This feature ensures that applications and users can access objects using the same bucket names and paths, regardless of the physical location of the object store (e.g., New York or London). The global namespace is particularly useful in scenarios involving availability zone pairing, where data consistency and accessibility across regions are required.
TheNutanix Certified Professional – Unified Storage (NCP-US)study guide further details that “enabling a global namespace in Nutanix Objects requires configuring the object stores to share a common namespace, which is supported when Prism Central instances are paired for availability zones and IAM replication is enabled.” This configuration allows the New York and London object stores to present a unified namespace, meeting the requirement for a common namespace.
Les autres options sont incorrectes :
* Create a Federated Namespace: Nutanix Objects does not use the term “Federated Namespace.” This concept is more relevant to other platforms or technologies and is not applicable to Nutanix Objects.
* Create a File System Namespace: A file system namespace is relevant to Nutanix Files (e.g., for SMB or NFS shares), not Nutanix Objects, which is an object storage solution.
* Create a Kubernetes Namespace: A Kubernetes namespace is used to organize resources in a Kubernetes cluster and is unrelated to Nutanix Objects or its namespace requirements.
The NUSA course documentation notes that “a global namespace in Nutanix Objects is configured through Prism Central, leveraging availability zone pairing and IAM replication to ensure consistent bucket naming and access across distributed object stores.” The administrator should configure the global namespace in the Nutanix Objects settings for both the New York and London instances, ensuring that the Prism Central instances are properly paired and IAM replication is active.
Références :
Nutanix Unified Storage Administration (NUSA) Course, Section on Nutanix Objects: “Configuring global namespace for distributed object stores.” Nutanix Certified Professional – Unified Storage (NCP-US) Study Guide, Topic 2: Configure and Utilize Nutanix Unified Storage, Subtopic: “Nutanix Objects global namespace and availability zone pairing.” Nutanix Documentation (https://www.nutanix.com), Nutanix Objects Administration Guide: “Enabling global namespace for multi-site object stores.”

Q61. Which term describes Nutanix Files blocking access to a file until its file state is manually changed?

Unquarantined

Quarantined

Cleaned

Deleted

Q62. Question:
When naming an Object Store instance, which two naming rules must be followed? (Choose two.)

Must be a minimum of three and a maximum of 32 characters long.

Must begin with a number and end with a letter or number.

Must begin with a letter, and end with a letter or number.

Must be unique across all existing object store names in Objects.

Q63. Question:
What is the most likely cause no Prism Element clusters are listed when trying to create a new object store?

The administrator did not manually sync Prism Element to Prism Central after registration.

Prism Element cluster CVMs must be restarted after registration.

Although Prism Element is registered, object stores cannot be added via Prism Central.

Prism Element has not yet completed synchronization with Prism Central.

Q64. An administrator would like to protect an object store from a single node or two-drive failure. What are the requirements for enabling this level of resiliency on a newly-deployed object store?

Multi-cluster option must be disabled for the object store.

Each node in the dense node platform requires 20 or more HDDs.

Cluster is comprised of a minimum of seven nodes.

New storage container is created for the object store.

To protect a Nutanix Objects store from a single node or two-drive failure, the cluster must be comprised of a minimum of seven nodes. Nutanix Objects uses erasure coding to provide resiliency, distributing data and parity fragments across nodes to ensure fault tolerance. To withstand a single node failure or a two-drive failure, a specific number of nodes is required to maintain data availability and rebuild capability.
TheNutanix Unified Storage Administration (NUSA)course states, “Nutanix Objects requires a minimum of seven nodes to ensure resiliency against a single node failure or a two-drive failure, using erasure coding to distribute data and parity across the cluster.” This configuration typically uses an erasure coding scheme like
4+2 or 5+2 (data + parity fragments), which requires at least six nodes for data distribution and an additional node to handle failures, totaling seven nodes.
TheNutanix Certified Professional – Unified Storage (NCP-US)study guide further elaborates that “to achieve resiliency against a single node or two-drive failure in Nutanix Objects, the cluster must have at least seven nodes to support the erasure coding configuration needed for this level of fault tolerance.” This ensures that even if one node fails or two drives are lost, the remaining nodes have sufficient data and parity fragments to reconstruct the lost data.
Les autres options sont incorrectes :
* Multi-cluster option must be disabled for the object store: The multi-cluster option is not relevant to resiliency within a single Nutanix Objects deployment. It pertains to managing multiple clusters, not erasure coding or fault tolerance.
* Each node in the dense node platform requires 20 or more HDDs: There is no requirement for 20 or more HDDs per node to achieve this level of resiliency. Resiliency depends on the number of nodes and erasure coding, not the number of drives per node.
* New storage container is created for the object store: While Nutanix Objects uses storage containers, creating a new container is not a requirement for enabling resiliency. Resiliency is determined by the cluster configuration and erasure coding settings.
The NUSA course documentation highlights that “a minimum of seven nodes ensures Nutanix Objects can maintain data availability and rebuild data in the event of a single node or two-drive failure, leveraging erasure coding for resiliency.” References:
Nutanix Unified Storage Administration (NUSA) Course, Section on Nutanix Objects: “Configuring resiliency for Nutanix Objects.” Nutanix Certified Professional – Unified Storage (NCP-US) Study Guide, Topic 2: Configure and Utilize Nutanix Unified Storage, Subtopic: “Nutanix Objects resiliency and erasure coding requirements.” Nutanix Documentation (https://www.nutanix.com), Nutanix Objects Administration Guide: “Cluster sizing for resiliency in Nutanix Objects.”

Q65. An administrator would like to get notified by email of unusual behavior related to permission changes on their corporate file shares. How would the administrator configure File Analytics to receive notifications in a timely fashion?

Create an Alert Policy

Configure Events Quotas

Define Anomaly Rules

Set Ransomware Email Recipient

To receive email notifications about unusual behavior related to permission changes on corporate file shares, the administrator shoulddefine anomaly rulesin Nutanix File Analytics. File Analytics is a monitoring and analytics tool for Nutanix Files that provides visibility into file share activities, including permission changes, access patterns, and potential security threats. Anomaly rules allow administrators to detect and be notified of unusual or suspicious activities, such as unexpected permission modifications.
TheNutanix Unified Storage Administration (NUSA)course explains that File Analytics includes an anomaly detection feature that uses machine learning to identify deviations from normal behavior. The course states, “Administrators can define anomaly rules in File Analytics to monitor specific activities, such as permission changes, and configure email notifications for timely alerts.” By setting up anomaly rules, the administrator can specify criteria for permission-related events and enable email alerts to be sent when such anomalies are detected.
TheNutanix Certified Professional – Unified Storage (NCP-US)study guide further elaborates that “File Analytics anomaly rules can be customized to track permission changes, excessive file access, or other suspicious activities, with notifications sent via email to ensure timely response.” This makes anomaly rules the most appropriate method for addressing the administrator’s requirement.
The other options are not suitable:
* Create an Alert Policy: Alert policies in Nutanix are typically used for system-level events (e.g., hardware failures or cluster issues) managed through Prism Central, not for file share-specific activities like permission changes.
* Configure Events Quotas: Events quotas are used to manage resource limits or thresholds, not to monitor or notify about specific activities like permission changes.
* Set Ransomware Email Recipient: This option is specific to ransomware detection in File Analytics, which focuses on identifying file encryption or mass file modifications, not permission changes.
The NUSA course documentation notes that “File Analytics anomaly rules provide granular control over monitoring file share activities, with email notifications ensuring administrators are promptly informed of potential security issues like unauthorized permission changes.” References:
Nutanix Unified Storage Administration (NUSA) Course, Section on File Analytics: “Configuring anomaly rules for monitoring and notifications.” Nutanix Certified Professional – Unified Storage (NCP-US) Study Guide, Topic 3: Analyze and Monitor Nutanix Unified Storage, Subtopic: “File Analytics and anomaly detection.” Nutanix Documentation (https://www.nutanix.com), Nutanix File Analytics Guide: “Setting up anomaly rules and email notifications.”

Q66. An administrator has been asked to protect a Nutanix Files instance between two sites supporting the following capabilities: 1-hour RPO, four recovery points, and cross-hypervisor capabilities. Which Nutanix feature matches the requirements?

Protection Policies

Smart DR

Smart Sync

Protection Domain

To protect a Nutanix Files instance between two sites with a1-hour RPO (Recovery Point Objective),four recovery points, andcross-hypervisor capabilities, the administrator should useSmart DR. Smart DR is a disaster recovery feature for Nutanix Files that enables replication of file shares between primary and recovery sites, supporting automated failover and recovery with configurable RPOs and retention policies.
TheNutanix Unified Storage Administration (NUSA)course explains that “Smart DR for Nutanix Files supports replication between sites with configurable RPOs as low as 1 hour, multiple recovery points, and cross-hypervisor compatibility, ensuring seamless failover and recovery.” Smart DR allows the administrator to set a replication schedule to meet the 1-hour RPO requirement, retain four recovery points by configuring the retention policy, and supports cross-hypervisor environments (e.g., AHV, ESXi, Hyper-V) since Nutanix Files operates at the file-share level, independent of the underlying hypervisor.
TheNutanix Certified Professional – Unified Storage (NCP-US)study guide further states that “Smart DR provides disaster recovery for Nutanix Files with an RPO as low as 1 hour, the ability to retain multiple recovery points (e.g., four snapshots), and compatibility across hypervisors, making it ideal for multi-site file server protection.” The feature uses asynchronous replication to copy file share data to the recovery site, ensuring data consistency and availability.
Les autres options sont incorrectes :
* Protection Policies: Protection Policies in Nutanix are used for backup and snapshot schedules, typically for VMs or volumes, but they are not specific to Nutanix Files and do not support cross-site replication with the specified RPO.
* Smart Sync: Smart Sync is not a Nutanix feature; it may refer to third-party tools or unrelated functionalities and is not applicable here.
* Protection Domain: Protection Domains are used for VM-level replication and disaster recovery in Nutanix, not for Nutanix Files, and they are hypervisor-specific, which may limit cross-hypervisor support.
The NUSA course documentation highlights that “Smart DR meets stringent RPO requirements, such as 1- hour intervals, and supports multiple recovery points while ensuring compatibility across hypervisors, making it the optimal solution for Nutanix Files disaster recovery.” References:
Nutanix Unified Storage Administration (NUSA) Course, Section on Nutanix Files: “Smart DR for disaster recovery and replication.” Nutanix Certified Professional – Unified Storage (NCP-US) Study Guide, Topic 2: Configure and Utilize Nutanix Unified Storage, Subtopic: “Smart DR configuration and capabilities for Nutanix Files.” Nutanix Documentation (https://www.nutanix.com), Nutanix Files Administration Guide: “Smart DR setup for multi-site protection.”

Q67. What is this delay time called?

Quarantine

Cool Off interval

Locked State

Retention Period

The question refers to a “delay time” in the context of Nutanix Unified Storage, but without specific context, I will assume it relates to a common scenario in Nutanix Files or Objects, such as ransomware protection or anomaly detection in File Analytics, where a delay time is often used to manage alerts or actions. The most applicable term in this context isCool Off interval, which is used in Nutanix File Analytics to define the delay time between successive alerts for the same anomaly to prevent alert flooding.
TheNutanix Unified Storage Administration (NUSA)course states, “In File Analytics, the Cool Off interval is a configurable delay time that specifies the minimum period between consecutive alerts for the same anomaly, preventing excessive notifications for recurring issues.” For example, if File Analytics detects a potential ransomware attack (e.g., mass file renaming), the Cool Off interval ensures that the system does not send repeated alerts for the same issue within a short timeframe, allowing administrators to focus on resolving the problem without being overwhelmed by notifications.
TheNutanix Certified Professional – Unified Storage (NCP-US)study guide further elaborates that “the Cool Off interval in File Analytics is a delay time used to manage anomaly alerts, ensuring that notifications are sent at reasonable intervals to avoid alert fatigue.” This feature is critical for monitoring scenarios like ransomware detection, where rapid file operations might otherwise trigger excessive alerts.
The other options are incorrect in this context:
* Quarantine: Quarantine refers to isolating files or clients (e.g., in ransomware protection), not a delay time.
* Locked State: Locked State is not a term used in Nutanix Files or Objects for a delay time; it might refer to a WORM-locked object but does not fit a delay context.
* Retention Period: Retention Period refers to the duration data is kept (e.g., in WORM or snapshots), not a delay between actions like alerts.
If the “delay time” refers to a different context (e.g., WORM retention in Nutanix Objects), the answer might be Retention Period, but the Cool Off interval in File Analytics is the most fitting based on typical usage in monitoring scenarios.
The NUSA course documentation emphasizes that “the Cool Off interval is the delay time used in File Analytics to manage the frequency of anomaly alerts, ensuring effective monitoring without overwhelming administrators.” References:
Nutanix Unified Storage Administration (NUSA) Course, Section on File Analytics: “Configuring Cool Off intervals for anomaly alerts.” Nutanix Certified Professional – Unified Storage (NCP-US) Study Guide, Topic 3: Analyze and Monitor Nutanix Unified Storage, Subtopic: “File Analytics alert management.” Nutanix Documentation (https://www.nutanix.com), Nutanix File Analytics Guide: “Setting Cool Off intervals for anomaly notifications.” Below are the answers to the provided questions (Q42-Q46), formatted as requested, with 100% verified answers based on the official **Nutanix Unified Storage (NCP-US)** and **Nutanix Unified Storage Administration (NUSA)** course documents. Typing errors have been corrected, and comprehensive explanations are included with exact extracts and references from the relevant Nutanix documentation.
—

Q68. An administrator needs to create a Nutanix Data Lens Report, which will be scheduled to automatically run Friday at 7:00pm. Which two formats can be used for the scheduled report? (Choose two.)

JSON

CSV

XML

PDF

Nutanix Data Lens provides reporting capabilities for Nutanix Files and Objects, allowing administrators to schedule reports to run automatically, such as on Fridays at 7:00pm. When scheduling a report in Data Lens, the available output formats for the scheduled report are **CSV** and **PDF**. These formats are widely supported for data analysis (CSV) and presentation/sharing (PDF), making them suitable for automated reports.
The **Nutanix Unified Storage Administration (NUSA)** course states, “Nutanix Data Lens supports scheduling reports to run automatically, with output available in CSV and PDF formats, enabling administrators to analyze and share data efficiently.” CSV (Comma-Separated Values) is ideal for importing into spreadsheets or other data analysis tools, while PDF provides a formatted, human-readable document that can be easily shared with stakeholders.
The **Nutanix Certified Professional – Unified Storage (NCP-US)** study guide further elaborates that
“scheduled reports in Nutanix Data Lens can be generated in CSV and PDF formats, providing flexibility for both data analysis and reporting purposes.” The administrator can configure the report in Data Lens, set the schedule for Friday at 7:00pm, and select CSV, PDF, or both as the output formats for delivery (e.g., via email or download).
Les autres options sont incorrectes :
– **JSON**: JSON is a data interchange format but is not supported as an output format for scheduled reports in Nutanix Data Lens.
– **XML**: XML is another data format but is not supported for Data Lens scheduled reports, which are limited to CSV and PDF.
The NUSA course documentation emphasizes that “Data Lens scheduled reports can be generated in CSV and PDF formats, ensuring compatibility with various use cases for data analysis and presentation.” References:
– Nutanix Unified Storage Administration (NUSA) Course, Section on Nutanix Data Lens: “Scheduling reports and supported output formats.”
– Nutanix Certified Professional – Unified Storage (NCP-US) Study Guide, Topic 3: Analyze and Monitor Nutanix Unified Storage, Subtopic: “Data Lens reporting capabilities.”
– Nutanix Documentation (https://www.nutanix.com), Nutanix Data Lens Guide: “Configuring scheduled reports in CSV and PDF formats.”
—

Q69. A company is planning to upgrade the Nutanix Objects cluster deployed on-premise to the latest version. An administrator has logged into Prism Central using domain credentials. After navigating to the LCM page and performing an inventory, the administrator notices that the latest version of Objects is not showing. The following components have been updated to the latest available version listed in LCM: MSP Controller, Objects Manager, Objects Services. After running an LCM inventory successfully, the latest version of Objects still is not listed. What could be the reason?

The administrator does not have needed permissions

The Objects version is not supported on-premise

Prism Central is not running a compatible version

The MSP Controller on Prism Element has not been updated

The issue involves an administrator attempting to upgrade a Nutanix Objects cluster using Prism Central’s Lifecycle Manager (LCM), but the latest version of Nutanix Objects is not listed after running an inventory, despite other components (MSP Controller, Objects Manager, Objects Services) being updated. The most likely reason is thatPrism Central is not running a compatible versionrequired to support the latest Nutanix Objects version.
TheNutanix Unified Storage Administration (NUSA)course states, “LCM upgrades for Nutanix Objects require Prism Central to be running a version that is compatible with the target Objects version; if Prism Central is not on a compatible version, the latest Objects version will not be listed in the LCM inventory.” Prism Central orchestrates LCM upgrades, and its version must support the new features, APIs, and metadata of the target Nutanix Objects version. If Prism Central is running an older version, it may not recognize or list newer versions of Nutanix Objects available for upgrade.
TheNutanix Certified Professional – Unified Storage (NCP-US)study guide further elaborates that “a common reason for missing component versions in LCM is an incompatible Prism Central version; administrators must ensure Prism Central is upgraded to a version that supports the target Nutanix Objects release.” The guide recommends checking the Nutanix compatibility matrix to verify that the current Prism Central version supports the desired Objects version and upgrading Prism Central if necessary.
Les autres options sont incorrectes :
* The administrator does not have needed permissions: The administrator has already logged into Prism Central, navigated to the LCM page, and performed an inventory, indicating sufficient permissions to view available versions. Permission issues would typically prevent access to LCM entirely.
* The Objects version is not supported on-premise: Nutanix Objects is fully supported on-premise, and there is no indication that the target version is cloud-only.
* The MSP Controller on Prism Element has not been updated: The MSP Controller has already been updated to the latest version as per the scenario, and the MSP Controller on Prism Element is not directly responsible for listing Objects versions in Prism Central’s LCM.
The NUSA course documentation emphasizes that “ensuring Prism Central is on a compatible version is a critical step before upgrading Nutanix Objects via LCM; an incompatible Prism Central version will prevent the latest Objects version from appearing in the inventory.” References:
Nutanix Unified Storage Administration (NUSA) Course, Section on Lifecycle Management: “Prism Central compatibility for Nutanix Objects upgrades.” Nutanix Certified Professional – Unified Storage (NCP-US) Study Guide, Topic 1: Deploy and Upgrade Nutanix Unified Storage, Subtopic: “LCM upgrade troubleshooting for Nutanix Objects.” Nutanix Documentation (https://www.nutanix.com), LCM Administration Guide: “Prism Central version compatibility for component upgrades.”

Q70. An administrator would like to load balance an SMB share across multiple FSVMs.
What feature should the administrator enable to accomplish this?

Distributed

Disaster Recovery

Multiple Copies

High Availability

Q71. Exhibit:

An administrator is enabling Nutanix Volumes for use with workloads within a Nutanix-based environment.
Based on the exhibit, which field is required by Nutanix Volumes to be populated?

FQDN

iSCSI Data Services IP

Virtual IPv6

Virtual IP

The exhibit shows the “Cluster Details” page in a Nutanix Prism interface, displaying fields such as Cluster Name, FQDN, Virtual IP, Virtual IPv6, and iSCSI Data Services IP. The administrator is enabling Nutanix Volumes, which is a block storage service that provides iSCSI-based storage for workloads. Nutanix Volumes allows external hosts or VMs to connect to the Nutanix cluster via iSCSI, requiring a specific IP address for iSCSI communication.
According to theNutanix Unified Storage Administration (NUSA)course, “Nutanix Volumes requires the iSCSI Data Services IP to be configured in the cluster settings to enable iSCSI connectivity for external hosts or workloads.” The iSCSI Data Services IP is a dedicated IP address used by the Nutanix cluster to handle iSCSI traffic, ensuring that iSCSI initiators (clients) can connect to the cluster and access block storage volumes. This field must be populated to enable Nutanix Volumes functionality, as it serves as the endpoint for iSCSI communication.
TheNutanix Certified Professional – Unified Storage (NCP-US)study guide further elaborates that “the iSCSI Data Services IP is a mandatory field when enabling Nutanix Volumes, as it defines the IP address that external iSCSI initiators use to connect to the cluster for block storage access.” Without this IP address, Nutanix Volumes cannot function, as there would be no designated network endpoint for iSCSI traffic.
In the exhibit, the “iSCSI Data Services IP” field is present, indicating its relevance to Nutanix Volumes configuration. The other fields are not mandatory for enabling Nutanix Volumes:
* FQDN (Fully Qualified Domain Name): The FQDN is optional and used for resolving the cluster’s name in DNS. It is not required for Nutanix Volumes to function, as iSCSI connectivity relies on IP addresses, not DNS names.
* Virtual IPv6: This field is for configuring a Virtual IP using IPv6 for cluster management access (e.g., Prism GUI). Nutanix Volumes does not require IPv6; the iSCSI Data Services IP typically uses IPv4, and IPv6 support is optional.
* Virtual IP: The Virtual IP (IPv4) is used for accessing the Prism GUI and other cluster management services. While recommended for cluster management, it is not specifically required for Nutanix Volumes, as iSCSI traffic uses the iSCSI Data Services IP.
The NUSA course documentation emphasizes that “configuring the iSCSI Data Services IP is a prerequisite for enabling Nutanix Volumes, ensuring that iSCSI initiators can connect to the cluster for block storage operations.” The administrator must populate this field with a valid IP address from the cluster’s network to enable Nutanix Volumes successfully.
Références :
Nutanix Unified Storage Administration (NUSA) Course, Section on Nutanix Volumes: “Configuring iSCSI Data Services IP for Nutanix Volumes.” Nutanix Certified Professional – Unified Storage (NCP-US) Study Guide, Topic 2: Configure and Utilize Nutanix Unified Storage, Subtopic: “Nutanix Volumes setup and iSCSI configuration.” Nutanix Documentation (https://www.nutanix.com), Nutanix Volumes Administration Guide: “Enabling Nutanix Volumes and configuring iSCSI Data Services IP.”

Q72. Question:
File Analytics analyzes data for what period of time?

Daily up to 1 year

Hourly up to 90 days

Monthly up to 5 years

Daily up to 5 years

Q73. An administrator has created a multi-protocol department share on Nutanix Files with the following configuration:
* Max size of 800GB
* SMB as the primary protocol
* NFS configured for read-write access
* Quota policy for AD group HR, limiting to 20GB
* Second quota policy of 30GB for AD group Finance
A user who is a member of the HR group receives daily email notifications that they have consumed all available space but is still able to write new files. Another user in the Finance group using Linux can write files and receives no email notification.
What should an administrator do to restrict the HR user from writing new data?

Remove the default quota policy.

Set a user level quota.

Reduce the Finance quota limit.

Set hard limit enforcement.

Q74. Where are standard tiering policies managed?

Prism Central Admin Dashboard

Prism Element Data Protection Dashboard

Nutanix Files Console

Nutanix Data Lens

Standard tiering policies for Nutanix Unified Storage are managed inNutanix Data Lens. Nutanix Data Lens is a cloud-based service that provides data lifecycle management, analytics, and tiering capabilities for Nutanix Files and Objects. It enables administrators to define and manage tiering policies to move data between different storage tiers (e.g., from Nutanix storage to cloud storage like AWS S3) based on access patterns, age, or other criteria.
According to theNutanix Unified Storage Administration (NUSA)course, “Nutanix Data Lens is used to configure and manage standard tiering policies for Nutanix Files and Objects, allowing data to be tiered to cost-effective storage based on predefined rules.” This includes setting policies to archive infrequently accessed data to cloud storage, optimizing storage costs while maintaining accessibility.
TheNutanix Certified Professional – Unified Storage (NCP-US)study guide further clarifies that “Data Lens provides a centralized interface for managing tiering policies, enabling automated data movement to secondary storage tiers, such as cloud-based object stores.” Administrators can access Data Lens to define rules for data tiering, monitor tiering activities, and ensure compliance with organizational data management requirements.
Les autres options sont incorrectes :
* Prism Central Admin Dashboard: Prism Central is used for cluster management, monitoring, and orchestration but does not provide specific interfaces for managing tiering policies.
* Prism Element Data Protection Dashboard: Prism Element focuses on individual cluster management and data protection tasks (e.g., snapshots, replication), not tiering policies.
* Nutanix Files Console: The Nutanix Files Console is used for configuring and managing file servers and shares, but tiering policies are managed externally through Data Lens.
The NUSA course documentation emphasizes that “Nutanix Data Lens integrates with Nutanix Files to provide tiering capabilities, allowing administrators to manage data placement across on-premises and cloud storage tiers seamlessly.” References:
Nutanix Unified Storage Administration (NUSA) Course, Section on Nutanix Data Lens: “Configuring tiering policies for Nutanix Files and Objects.” Nutanix Certified Professional – Unified Storage (NCP-US) Study Guide, Topic 2: Configure and Utilize Nutanix Unified Storage, Subtopic: “Data lifecycle management with Nutanix Data Lens.” Nutanix Documentation (https://www.nutanix.com), Nutanix Data Lens Guide: “Managing standard tiering policies.”

Q75. An administrator needs to ensure the company has access to key information about their Nutanix Files deployment shares and files, such as Malicious Clients, Vulnerable Shares, and a list of potential ransomware attack attempts. What must be deployed on-premises to provide the monitoring needed to see this information?

LCM dark site webserver

Prism Central

Data Lens

File Analytics VM

To monitor key information about a Nutanix Files deployment, such asMalicious Clients,Vulnerable Shares
, and alist of potential ransomware attack attempts, the administrator must deploy theFile Analytics VM on-premises. Nutanix File Analytics is a dedicated virtual machine that provides advanced monitoring and analytics for Nutanix Files, offering insights into security-related activities, including malicious client behavior, share vulnerabilities, and ransomware detection.
TheNutanix Unified Storage Administration (NUSA)course states, “File Analytics is a VM that must be deployed on-premises to provide detailed monitoring of Nutanix Files, including identifying Malicious Clients, Vulnerable Shares, and potential ransomware attack attempts through its analytics and anomaly detection features.” File Analytics includes dashboards and widgets that specifically highlight security risks, such as the Malicious Clients list (clients exhibiting suspicious behavior), Vulnerable Shares (shares with overly permissive access), and ransomware detection (based on file activity patterns like mass encryption or renaming).
TheNutanix Certified Professional – Unified Storage (NCP-US)study guide further elaborates that
“deploying the File Analytics VM enables administrators to monitor Nutanix Files for security threats, providing visibility into Malicious Clients, Vulnerable Shares, and ransomware attempts through its integrated analytics engine.” File Analytics runs locally within the Nutanix cluster, making it suitable for on-premises deployments and capable of operating in isolated environments like dark sites.
Les autres options sont incorrectes :
* LCM dark site webserver: An LCM dark site webserver is used to host software updates for LCM in air-gapped environments but does not provide monitoring or analytics for Nutanix Files.
* Prism Central: Prism Central provides centralized management and monitoring for Nutanix clusters but does not offer the specific security-focused analytics (e.g., Malicious Clients, ransomware detection) that File Analytics provides for Nutanix Files.
* Data Lens: Nutanix Data Lens is a cloud-based service for data lifecycle management and analytics, primarily for Nutanix Objects and Files, but it focuses on tiering and data placement, not security monitoring like ransomware detection or malicious clients.
The NUSA course documentation emphasizes that “the File Analytics VM is the essential on-premises component for monitoring Nutanix Files, providing critical security insights such as Malicious Clients, Vulnerable Shares, and ransomware attack attempts.” References:
Nutanix Unified Storage Administration (NUSA) Course, Section on File Analytics: “Deploying File Analytics VM for security monitoring.” Nutanix Certified Professional – Unified Storage (NCP-US) Study Guide, Topic 3: Analyze and Monitor Nutanix Unified Storage, Subtopic: “File Analytics for Nutanix Files security insights.” Nutanix Documentation (https://www.nutanix.com), Nutanix File Analytics Guide: “Monitoring Malicious Clients, Vulnerable Shares, and ransomware attempts.”