最新の2022年5月取得 ExamBoosts HPE6-A71試験[Q90-Q112]を使用して効果的な侵入テストを実施する

NO.90 Which forwarding mode is used for a WLAN if a RAP needs to decrypt all user traffic and forward it locally?

NO.91 An administrator needs to authenticate users connected to an ArubaOS-Switch where the switch authenticates the user, assigns the firewall policies to the user, and processes some of the users’ traffic. Which connection method should the administrator configure on the ArubaOS-Switch?

NO.92 展示を参照。

Controllers are configured in a cluster as shown in the exhibit. These are the network details.
-A Mobility Master (MM) managers the cluster.
-The cluster contains two controllers: C1 and C2.
-AP1 and AP2 use C1 as their Active AP Anchor Controller (A-AAC), with C2 as their Standby AAC (S-AAC).
-AP3 and AP4 use C2 as their A-AAC with, C1 as their S-AAC.
User1 establishes a wireless connection via AP1, where the Active User Controller (U-UAC) assigned is C1, with C2 as the standby. What happens when User1 roams the wireless network and eventually their session is handled by AP3?

NO.93 An administrator adds local administrative accounts to manage the Aruba Mobility Controllers (MCs). Which role should be assigned to anadministrator who needs to only generate reports and monitor WLANS and ports?

NO.94 An administrator configures a port on a RAP through the association of an AAA profile with 802.1X authentication to a RAP Ethernet port. This port connects to a switch with user desktops attached.
Theadministrator notices that when users connect wirelessly to the RAP, a user role correctly restricts their traffic. But, when users connect with their wired desktops, they are assigned an initial role and routed to a Captive Portal page.
What must the administrator do to enable desktop usage based on the user’s role assignment?

NO.95 An administrator configures two Mobility Masters (MMs) for redundancy and database synchronization.
Which protocol transports database information between the two MMs?

NO.96 An administrator needs to implement multiple configuration changes on a set of Aruba Mobility Controllers (MCs) that involve both VLAN and interface configurations at the same time. The controllers are deployed in a cluster.
How can the administrator accomplish this task?

97位 An administrator implements machine authentication in an 802.1X profile. Which user role will be assigned to the user’s session if machine authentication passes, but the 802.1X user authentication fails for auser who connects?

NO.98 What can be determined from the command output shown below?

NO.99 An administrator purchases a pair of Mobility Masters (MM) and wants to deploy 16 Virtual Mobility Controllers (VMCs). What is the minimum number of clusters that the administrator needs to implement to support the number of VMCs?

NO.100 展示を参照。

Under which AirWave Management Platform (AMP) section should an administrator navigate to see the connection status between the AMP and managed device shown inthe exhibit?

NO.101 What must the administrator configure onAirWare to monitor and run operational commands on the Aruba Mobility Masters (MMs) and Mobility Controllers (MCs)?

NO.102 An administrator sets up a network scan set in AirWave to scan a subnet to identify devices for a firmware upgrade. The scan completes and AirWave successfully uses the SNMP credentials to validate SNMP access.
However, SSH access failsand the administrator must manually configure the SSH credentials used for all of these devices.
What should the administrator have done before running the network scan?

NO.103 Where would an administrator define the split-tunneling mode for a RAP located at a branch office?

NO.104 An administrator sets up a cluster of Aruba Mobility Controllers (MCs). What can the administrator determine about the cluster from the command output shown below?

NO.105 An administrator configures a port on a RAP through the association of an AAA profile with 802.1X authentication to a RAP Ethernet port. This port connects to a switch with user desktops attached. The administrator notices that when users connect wirelessly to the RAP, a user role correctly restricts their traffic.
But, when users connect with their wired desktops, they have full access to corporate resources.
What must the administrator do to restrict desktop usage based on the users’ role assignment?

NO.106 In a cluster-controller environment, which Aruba component in a network builds a cache table of mDNS records that can be used to help user devices access Apple Bonjour services?

NO.107 An administrator creates a user role that department A in a company uses. Various other roles exist for other departments. All employees connect to the same ESSID, which authenticates to an external AAA server. How should the administrator configure to assign the appropriate roles to the employees?

NO.108 Which device can terminate to a cluster of Aruba Mobility Controllers (MCs) that run ArubaOS 8.x?

NO.109 An administrator moves an AP from Campus 1 to Campus 2. At the Campus 2, the moved AP does not connect to a controller and download an AP Group configuration.
Which process should the administrator perform to reset the AP back to its initial default state?

NO.110 The administrator expects the AP to connect to a cluster, but the AP fails to connect. The administrator examines the configuration of an AP from apboot mode shown in the exhibit. What can the administrator determine about the configuration of the AP?

NO.111 展示を参照。

An administrator configures a split-tunnel policy to be used by RAPs at branch offices. Under theConfiguration section on the Mobility master (MM) shown in the exhibit, where should the administrator configure the split-tunnel mode so that it can be deployed to the RAPs?

NO.112 展示を参照。

An administrator implements the MultiZone feature. The administrator sets up five zones as shown in the exhibit.
-Zone A has six controllers that form a cluster.
-Zone B has three controllers that from a cluster.
-Zones C, D, and E have a single standalone controller each.
A total of 13 VAPs are created across the five zones. Azone needs to accept RAP connections form branch offices. All zones have the same AP Group name. One of the zones will not accept connections from the MultiZone APs.
Which could be a cause of this problem?