[Full-Version] 2024 New Preparation Guide of API API-936 Exam [Q56-Q72]

NO.56 A moldable refractory material that can be extruded and has a level of workability that permits it to be pounded into place to form a monolithic structure

NO.57 The welding method utilizing an arc-welding machine in conjunction with a timer and a gun is called

NO.58 Refractory failure mechanisms are.

NO.59 Refractory lined pipe used for the transport of hot particulate medium and gases between process vessels is called

NO.60 The effective diameter of metal fiber is

NO.61 For fire clay and some high alumina materials, the most commonly used index of refractoriness is known as:

NO.62 The length of metal fiber is

NO.63 Section of transfer line in which flow is in an upward direction is called

NO.64 Heating the new refractory too rapidly will cause

NO.65 A typical example of hexalt anchor is

NO.66 Pre-turn around planning means

NO.67 Compositions of ground refractory materials develop a strong bond at air ambient temperatures by virtue of chemical reactions within the binder phase that is usually activated by water additions. These refractories include cement and phosphate bonded castables is called:

NO.68 The selected compression test section of the specimen for the CCs test shall be free from

NO.69 The surface of a refractory section exposed to the source of heat

NO.70 A condition describing a refractory lining that is soft and friable

NO.71 Modulus of rupture test for castable refractories, the test specimen shall be

NO.72 The standard size of a fabricated test panel for pneumatic gunning qualification is