Latest [Apr 19, 2024] 100% Passing Guarantee – Brilliant NSE7_LED-7.0 Exam Questions PDF [Q17-Q38]

Rate this post

Latest [Apr 19, 2024] 100% Passing Guarantee – Brilliant NSE7_LED-7.0 Exam Questions PDF

NSE7_LED-7.0 Certification – Valid Exam Dumps Questions Study Guide! (Updated 40 Questions)

Fortinet NSE 7 – LAN Edge 7.0 certification is a highly sought-after certification that demonstrates an individual’s proficiency in Fortinet’s network security solutions. Fortinet NSE 7 – LAN Edge 7.0 certification is an advanced-level certification that focuses on the design, configuration, and implementation of Fortinet’s network security solutions. By passing the Fortinet NSE7_LED-7.0 exam, professionals can validate their skills and expertise in network security and demonstrate their commitment to their profession.

NEW QUESTION 17
You are configuring a FortiGate wireless network to support automated wireless client quarantine using IOC Which two configurations must you put in place for a wireless client to be quarantined successfully? (Choose two)

Configure the wireless network to be in tunnel mode

Configure the FortiGate device in the Security Fabric with a FortiAnalyzer device

Configure a firewall policy to allow communication

Configure the wireless network to be in bridge mode

Explanation
According to the FortiGate Administration Guide, “To enable automated wireless client quarantine using IOC, you must configure the following settings: Configure your wireless network to be in tunnel mode. This allows FortiGate to inspect all wireless traffic and applysecurity policies. Configure your FortiGate device in the Security Fabric with a FortiAnalyzer device. This allows FortiAnalyzer to detect indicators of compromise (IOC) from wireless traffic and send quarantine commands to FortiGate.” Therefore, options A and B are true because they describe the configurations that must be put in place for a wireless client to be quarantined successfully using IOC. Option C is false because configuring a firewall policy to allow communication is not required, as the default firewall policy for tunnel mode wireless networks is to allow all traffic. Option D is false because configuring the wireless network to be in bridge mode is not supported, as FortiGate cannot inspect or quarantine wireless traffic in bridge mode.

NEW QUESTION 18
Refer to the exhibit.

Examine the IPsec VPN phase 1 configuration shown in theexhibit
An administrator wants to use certificate-based authentication for an IPsec VPN user Which three configuration changes must you make on FortiGate to perform certificate-based authentication for the IPsec VPN user? (Choose three)

Create a PKI user for the IPsec VPN user, and then configure the IPsec VPN tunnel to accept the PKI user as peer certificate

In the Authentication section of the IPsec VPN tunnel in the Method drop-down list select Signature and then select the certificate that FortiGate will use for IPsec VPN

In the IKE section of the IPsec VPN tunnel in the Mode field select Main (ID protection)

Import the CA that signed the user certificate

Enable XAUTH on the IPsec VPN tunnel

Explanation
According to the FortiGate Administration Guide, “To use certificate-based authentication, you must configure the following settings on both peers: Select Signature as the authentication method and select a certificate to use for authentication. Import the CA certificate that issued the peer’s certificate. Enable XAUTH on the phase 1 configuration.” Therefore, options B, D, and E are true because they describe the configuration changes that must be made on FortiGate to perform certificate-based authentication for the IPsec VPN user.
Option A is false because creating a PKI user for the IPsec VPN user is not required, as the user certificate can be verified by the CA certificate. Option C is false because changing the IKE mode to Main (ID protection) is not required, as the IKE mode can be either Main or Aggressive for certificate-based authentication.

NEW QUESTION 19
Refer to the exhibit.

Examine the FortiGate user group configuration and the Windows AD LDAP group membership information shown in the exhibit FortiGate is configured to authenticate SSL VPN users against Windows AD using LDAP The administrator configured the SSL VPN user group for SSL VPN users However the administrator noticed that both the student and j smith users can connect to SSL VPN Which change can the administrator make on FortiGate to restrict the SSL VPN service to the student user only?

In the SSL VPN user group configuration set Group Nam to CN-SSLVPN, CN=”users, DC-trainingAD, DC-training, DC-lab

In the SSL VPN user group configuration, change Name to cn=sslvpn, CN=users, DC=trainingAD, Detraining, DC-lab.

In the SSL VPN user group configuration set Group Name to ::;=Domain users.CN-Users/DC=trainingAD, DC-training, DC=lab.

In the SSL VPN user group configuration change Type to Fortinet Single Sign-On (FSSO)

Explanation
According to the FortiGate Administration Guide, “The Group Name is the name of the LDAP group that you want to use for authentication. The name must match exactly the name of the LDAP group on the LDAP server.” Therefore, option A is true because it will set the Group Name to match the LDAP group that contains only the student user. Option B is false because changing the Name will not affect the authentication process, as it is only a local identifier for the user group on FortiGate. Option C is false because setting the Group Name to Domain Users will include all users in the domain, not just the student user. Option D is false because changing the Type to FSSO will require a different configuration method and will not solve the problem.

NEW QUESTION 20
Which two statements about the MAC-based 802 1X security mode available on FortiSwitch are true? (Choose two.)

FortiSwitch authenticates a single device and opens the port to other devices connected to the port

FortiSwitch authenticates each device connected to the port

It cannot be used in conjunction with MAC authentication bypass

FortiSwitch can grant different access levels to each device connected to the port

Explanation
According to the FortiSwitch Administration Guide, “MAC-based 802.1X security mode allows you to authenticate each device connected to a port using its MAC address as the username and password.” Therefore, option B is true because it describes the MAC-based 802.1X security mode available on FortiSwitch. Option D is also true because FortiSwitch can grant different access levels to each device connected to the port based on the user group and security policy assigned to them. Option A is false because FortiSwitch does not authenticate a single device and open the port to other devices connected to the port, but rather authenticates each device individually. Option C is false because MAC-based 802.1X security mode can be used in conjunction with MAC authentication bypass (MAB) or EAP pass-through modes, which are fallback options for non-802.1X devices.

NEW QUESTION 21

Wireless guest users are unable to authenticate because they are getting a certificate error while loading the captive portal login page.This URL string is the HTTPS POST URL guest wireless users see when attempting to access the network using the web browser

Which two settings are the likely causes of the issue? (Choose two.)

The external server FQDN is incorrect

The wireless user’s browser is missing a CA certificate

The FortiGate authentication interface address is using HTTPS

The user address is not in DDNS form

Explanation
According to the exhibit, the wireless guest users are getting a certificate error while loading the captive portal login page. This means that the browser cannot verify the identity of the server that is hosting the login page.
Therefore, option A is true because the external server FQDN is incorrect, which means that it does not match the common name or subject alternative name of the server certificate. Option B is also true because the wireless user’s browser is missing a CA certificate, which means that it does not have the root or intermediate certificate that issued the server certificate. Option C is false because the FortiGate authentication interface address is using HTTPS, which is a secure protocol that encrypts the communication between the browser and the server. Option D is false because the user address is not in DDNS form, which is not related to the certificate error.

NEW QUESTION 22
Refer to the exhibit.

Examine the FortiManager information shown in the exhibit
Which two statements about the FortiManager status are true” (Choose two)

FortiSwitch manager is working in per-device management mode

FortiSwitch is not authorized

FortiSwitch manager is working in central management mode

FortiSwitch is authorized and offline

Explanation
According to the FortiManager Administration Guide, “Central management mode allows you to manage all FortiSwitch devices from a single interface on the FortiManager device.” Therefore, option C is true because the exhibit shows that the FortiSwitch manager is enabled and the FortiSwitch device is managed by the FortiManager device. Option D is also true because the exhibit shows that the FortiSwitch device status is offline, which means that it is not reachable by the FortiManager device, but it is authorized, which means that it has been added to the FortiManager device. Option A is false because per-device management mode allows you to manage each FortiSwitch device individually from its own web-based manager or CLI, which is not the case in the exhibit. Option B is false because the FortiSwitch device is authorized, as explained above.

NEW QUESTION 23
Where can FortiGate learn the FortiManager IP address or FQDN for zero-touch provisioning’?

From an LDAP server using a simple bind operation

From a TFTP server

From a DHCP server using options 240 and 241

From a DNS server using A or AAAA records

Explanation
According to the FortiGate Administration Guide, “FortiGate can learn the FortiManager IP address or FQDN for zero-touch provisioning from a DNS server using A or AAAA records. The DNS server must be configured to resolve the hostname fortimanager.fortinet.com to the IP address or FQDN of the FortiManager device.” Therefore, option D is true because it describes the method for FortiGate to learn the FortiManager IP address or FQDN for zero-touch provisioning. Option A is false because LDAP is not used for zero-touch provisioning. Option B is false because TFTP is not used for zero-touch provisioning. Option C is false because DHCP options 240 and 241 are not used for zero-touch provisioning.

NEW QUESTION 24
Refer to the exhibit.

Examine the FortiSwitch security policy shown in the exhibit
If the security profile shown in the exhibit is assigned to all ports on a FortiSwitch device for 802 1X authentication which statement about the switch is correct?

FortiSwitch cannot authenticate multiple devices connected to the same port

FortiSwitch will try to authenticate non-802 1X devices using the device MAC address as the username and password

FortiSwitch will assign non-802 1X devices to the onboarding VLAN

All EAP messages will be terminated on FortiSwitch

Explanation
According to the FortiSwitch Administration Guide, “If a device does not support 802.1X authentication, you can configure the switch to assign the device to an onboarding VLAN. The onboarding VLAN is a separate VLAN that you can use to provide limited network access to non-802.1X devices.” Therefore, option C is true because it describes the behavior of FortiSwitch when the security profile shown in the exhibit is assigned to all ports. Option A is false because FortiSwitch can authenticate multiple devices connected to the same port using MAC-based or MAB-EAP modes. Option B is false because FortiSwitch will not try to authenticate non-802.1X devices using the device MAC address as the username and password, but rather use MAC authentication bypass (MAB) or EAP pass-through modes. Option D is false because all EAP messages will be terminated on FortiGate, not FortiSwitch, when using 802.1X authentication.

NEW QUESTION 25
Exhibit.

Refer to the exhibit showing a network topology and SSID settings.
FortiGate is configured to use an external captive portal However wireless users are not able to see the captive portal login page Which configuration change should the administrator make to fix the problem?

Enable NAT in the firewall policy with the ID 13.

Add the FortiAuthenticator and WindowsAD address objects as exempt destinations services

Enable the captive-portal-exempt option in the firewall policy with the ID 12

Remove the guest.portal user group in the firewall policy with the ID 12

Explanation
According to the exhibit, the network topology and SSID settings show that FortiGate is configured to use an external captive portal hosted on FortiAuthenticator, which is connected to a Windows AD server for user authentication. However, wireless users are not able to see the captive portal login page, which means that they are not redirected to the external captive portal URL. Therefore, option B is true because adding the FortiAuthenticator and WindowsAD address objects as exempt destinations services will allow the wireless users to access the external captive portal URL without being blocked by the firewall policy. Option A is false because enabling NAT in the firewall policy with the ID 13 will not affect the redirection to the external captive portal URL, but rather the source IP address of the wireless traffic. Option C is false because enabling the captive-portal-exempt option in the firewall policy with the ID 12will bypass the captive portal authentication for the wireless users, which is not the desired outcome. Option D is false because removing the guest.portal user group in the firewall policy with the ID 12 will prevent the wireless users from being authenticated by FortiGate, which is required for accessing the external captive portal.

NEW QUESTION 26
Which CLI command should an administrator use to view the certificate verification process in real time?

diagnose debug application foauthd -1

diagnose debug application radiusd -1

diagnose debug application authd -1

diagnose debug application fnbamd -1

Explanation
According to the FortiOS CLI Reference Guide, “The diagnose debug application foauthd command enables debugging of certificate verification process in real time.” Therefore, option A is true because it describes the CLI command that an administrator should use to view the certificate verification process in real time. Option B is false because diagnose debug application radiusd -1 enables debugging of RADIUS authentication process, not certificate verification process. Option C is false because diagnose debug application authd -1 enables debugging of authentication daemon process, not certificate verification process. Option D is false because diagnose debug application fnbamd -1 enables debugging of FSSO daemon process, not certificate verification process.

NEW QUESTION 27
Which EAP method requires the use of a digital certificate on both the server end and the client end?

EAP-TTLS

PEAP

EAP-GTC

EAP-TLS

Explanation
According to the FortiGate Administration Guide, “EAP-TLS is the most secure EAP method. It requires a digital certificate on both the server end and the client end. The server and client authenticate each other using their certificates.” Therefore, option D is true because it describes the EAP method that requires the use of a digital certificate on both the server end and the client end. Option A is false because EAP-TTLS only requires a digital certificate on the server end, not the client end. Option B is false because PEAP also only requires a digital certificate on the server end, not the client end. Option C is false because EAP-GTC does not require a digital certificate on either the server end or the client end.

NEW QUESTION 28
Refer to the exhibit

Examine the sections of the configuration shown in the output
What action will FortiGate take when verifying the student certificate through OCSP?

Reject the student certificate if the OCSP server replies that the student certificate status is unknown

Not verify the OCSP server certificate

Use the OCSP URL included in the student certificate to verify the student certificate

Consider the student certificate status as valid if the OCSP server is unreachable

Explanation
According to the exhibit, the FortiGate configuration has ocsp-status enabled and ocsp-option set to certificate.
This means that FortiGate will use OCSP to verify the revocation status of certificates presented by clients. According to the FortiGate Administration Guide2, “If you select certificate, FortiGate uses an OCSP URL included in a certificate to verify that certificate.” Therefore, option C is true because it describes what action FortiGate will take when verifying the student certificate through OCSP. Option A is false because FortiGate will not reject the student certificate if the OCSP server replies that the student certificate status is unknown, but rather accept it as valid. Option B is false because FortiGate will verify the OCSPserver certificate by default, unless strict-ocsp-check is disabled. Option D is false because FortiGate will not consider the student certificate status as valid if the OCSP server is unreachable, but rather reject it as invalid.

NEW QUESTION 29
Refer to the exhibit.

Examine the FortiManager configuration and FortiGate CLI output shown in the exhibit An administrator is testing the NAC feature The test device is connected to a managed FortiSwitch device
{S224EPTF19″53C7)onpOrt2
After applying the NAC policy on port2 and generating traffic on the test device the test device is not matching the NAC policy therefore the test device remains m the onboarding VLAN Based on the information shown in the exhibit which two scenarios are likely to cause this issue? (Choose two.)

Management communication between FortiGate and FortiSwitch is down

The MAC address configured on the NAC policy is incorrect

The device operating system detected by FortiGate is not Linux

Device detection is not enabled on VLAN 4089

Explanation
According to the FortiManager configuration, the NAC policy is set to match devices with the MAC address of 00:0c:29:6a:2b:3c and the operating system of Linux.However, according to the FortiGate CLI output, the test device has a different MAC address of 00:0c:29:6a:2b:3d. Therefore, option B is true. Option A is also true because the FortiSwitch device status is shown as down, which means that the management communication between FortiGate and FortiSwitch is not working properly. This could prevent the NAC policy from being applied correctly. Option C is false because the device operating system detected by FortiGate is Linux, which matches the NAC policy. Option D is false because device detection is enabled on VLAN 4089, as shown by the command “config switch-controller vlan”.

NEW QUESTION 30
You are investigating a report of poor wireless performance in a network that you manage. The issue is related to an AP interface in the 5 GHz range You are monitoring the channel utilization over time.
What is the recommended maximum utilization value that an interface should not exceed?

85%

95%

75%

65%

Explanation
According to the FortiAP Configuration Guide, “Channel utilization measures how busy a channel is over a given period of time. It includes both Wi-Fi and non-Wi-Fi interference sources. A high channel utilization indicates a congested channel and can result in poor wireless performance. The recommended maximum utilization value that an interface should not exceed is 65%.” Therefore, option D is true because it gives the recommended maximum utilization value for an interface in the 5 GHz range. Options A, B, and C are false because they give higher utilization values that can cause poor wireless performance.
https://docs.fortinet.com/document/fortiap/7.0.0/configuration-guide/734537/wireless-radio-settings#channel-uti

NEW QUESTION 31
Refer to the exhibits

The exhibits show the wireless network (VAP) SSID profiles defined on FortiManager and an AP profile assigned to a group of APs that are supported by FortiGate None of the APs are broadcasting the SSlDs defined by the AP profile Which changes do you need to make to enable the SSIDs to broadcast?

In the SSIDs section enable Tunnel

Enable one channel in the Channels section

Enable multiple channels in the Channels section and enable Radio Resource Provision

In the SSIDs section enable Manual and assign the networks manually

Explanation
According to the FortiManager Administration Guide1, “To enable the SSID, you must select at least one channel for the radio. If no channels are selected, the SSID will not be enabled.” Therefore, enabling one channel in the Channels section will allow the SSIDs to broadcast.

NEW QUESTION 32
When you configure a FortiAP wireless interface for auto TX power control which statement describes how it configures its transmission power”?

Every 30 seconds the AP will measure the signal strength of the AP using the client The AP will adjust its signal strength up or down until the AP signal is detected at -70 dBm

Every 30 seconds FortiGate measures the signal strength of adjacent AP interfaces It will adjust its own AP power to match the adjacent AP signal strength

Every 30 seconds FortiGate measures the signal strength of adjacent FortiAP interfaces It will adjust the adjacent AP power to be detectable at -70 dBm

Every 30 seconds FortiGate measures the signal strength of the weakest associated client The AP will then configure its radio power to match the detected signal strength of the client

Explanation
According to the FortiAP Configuration Guide1, “Auto TX power control allows the AP to adjust its transmit power based on the signal strength of the client. The AP will measure the signal strength of the client every 30 seconds and adjust its transmit power up or down until the client signal is detected at -70 dBm.” Therefore, option A is true because it describes how the FortiAP wireless interface configures its transmission power when auto TX power control is enabled. Option B is false because FortiGate does not measure the signal strength of adjacent AP interfaces, but rather the FortiAP does. Option C is false because FortiGate does not adjust the adjacent AP power, but rather the FortiAP adjusts its own power. Option D is false becauseFortiGate does not measure the signal strength of the weakest associated client, but rather the FortiAP does.

Loading …

Fortinet NSE 7 – LAN Edge 7.0 certification is a vital certification for IT professionals who want to enhance their career prospects in the network security field. Fortinet NSE 7 – LAN Edge 7.0 certification is highly recognized in the industry and is a great way to showcase an individual’s skills and expertise in Fortinet’s security solutions. Fortinet NSE 7 – LAN Edge 7.0 certification can help professionals to stand out from the competition and increase their earning potential.

NSE7_LED-7.0 are Available for Instant Access: https://www.examboosts.com/Fortinet/NSE7_LED-7.0-practice-exam-dumps.html

NSE7_LED-7.0 latest dumps book NSE7_LED-7.0 new exam camp questions NSE7_LED-7.0 valid exam tips NSE7_LED-7.0 valid test objectives pdf reliable examcollection NSE7_LED-7.0

Previous: Previous post: Get The Most Updated CESP Dumps To Employment Support Professional Certification [Q67-Q91]

Next: Next post: Pass Your 1z0-1094-23 Exam at the First Try with 100% Real Exam Questions [Q13-Q34]

NSE7_LED-7.0 Practice Tests

Latest [Apr 19, 2024] 100% Passing Guarantee – Brilliant NSE7_LED-7.0 Exam Questions PDF [Q17-Q38]
(2023) PASS NSE7_LED-7.0 Exam Free Practice Test with 100% Accurate Answers [Q13-Q33]

Related Certifications

FCSS_ADA_AR-6.7 Exam Dumps
NSE7_LED-7.0 Exam Dumps
NSE7_CDS_AR-7.6 Exam Dumps
FCSS_NST_SE-7.4 Exam Dumps
NSE6_FWB-6.1 Exam Dumps
NSE5_FAZ-7.0 Exam Dumps
NSE5_FCT-6.2 Exam Dumps
NSE7_OTS-6.4 Exam Dumps
NSE6_FML-7.2 Exam Dumps
NSE7_PBC-7.2 Exam Dumps

Search for:

Exam Dumps

AACE International (1)
ACAMS (4)
ACE Fitness (1)
ACFCS (1)
ACFE (2)
Acquia (1)
ACSM (1)
ACT (1)
Adobe (19)
AEE (1)
AGA (1)
Alibaba Cloud (4)
Amazon (27)
American College of Rheumatology (1)
Android (1)
APA (1)
API (3)
APICS (3)
APMG-International (1)
Appian (1)
APSE (1)
ASIS (1)
ASQ (2)
ATLASSIAN (2)
Autodesk (1)
Avaya (10)
Aviatrix (1)
Axis (1)
BACB (1)
BCS (2)
BICSI (2)
Blockchain (1)
Blue Prism (3)
BOMI International (1)
CCE Global (2)
CertNexus (2)
CFA Institute (1)
CheckPoint (4)
CII (2)
CIMA (5)
CIPS (6)
Cisco (66)
CISI (1)
Citrix (5)
CIW (1)
Cloud Security Alliance (4)
CloudBees (1)
CMAA (1)
College Admission (1)
CompTIA (18)
Confluent (1)
CrowdStrike (3)
CWNP (2)
CyberArk (6)
DAMA (2)
Databricks (3)
Docker (1)
Dynatrace (1)
EC-COUNCIL (6)
ECCouncil (3)
EMC (22)
EnterpriseDB (1)
Ericsson (2)
Esri (1)
EXIN (3)
F5 (6)
FINRA (1)
Fortinet (20)
GAQM (2)
GED (1)
Genesys (4)
GIAC (4)
Google (15)
H3C (5)
HAAD (1)
HBX (1)
HDI (1)
HP (39)
HRCI (1)
Huawei (62)
IAPP (1)
IBM (19)
IIA (2)
IIBA (3)
Infor (2)
International Code Council (1)
ISACA (5)
ISC (6)
ISM (1)
ISQI (5)
ISTQB (7)
ITIL (2)
Juniper (19)
Linux Foundation (7)
Lpi (7)
Maryland Insurance Administration (1)
Medical Council of Canada (1)
Medical Professional (1)
Microsoft (77)
MongoDB (2)
MuleSoft (3)
NABP (3)
NACE (3)
NAHQ (3)
NCARB (1)
NCCER (1)
Netskope (1)
NetSuite (1)
Network Appliance (7)
NFPA (2)
NI (1)
NMLS (1)
Nokia (6)
Nutanix (12)
NVIDIA (1)
Ohio Department of Insurance (1)
OMSB (1)
Oracle (79)
OutSystems (1)
Palo Alto Networks (8)
PCI (2)
PDMA (1)
PECB (9)
Pegasystems (8)
Peoplecert (4)
PMI (7)
Postpartum Support International (1)
PRINCE2 (2)
PRMIA (2)
Pure Storage (1)
Python Institute (3)
Qlik (1)
RAPS (2)
Real Estate (1)
Real Estate Licensing (1)
RedHat (5)
SailPoint (2)
Salesforce (85)
SANS (1)
SAP (320)
SASInstitute (3)
Scaled Agile (1)
Scrum (4)
Scrum Alliance (1)
ServiceNow (7)
SHRM (1)
Sitecore (1)
Snowflake (6)
SolarWinds (1)
Splunk (14)
SUSE (1)
Symantec (1)
Tableau (2)
Test Prep (1)
The Open Group (6)
UiPath (1)
Uncategorized (19)
USGBC (2)
Veeam (3)
Veritas (1)
Vlocity (2)
VMware (21)
WGU (2)
Workday (2)
Zscaler (1)

Latest [Apr 19, 2024] 100% Passing Guarantee – Brilliant NSE7_LED-7.0 Exam Questions PDF [Q17-Q38]